Preparation of Chromium Electroplated Standard Film for Magnetic Thickness Gauge
摘 要
针对厚度测量仪镀铬标准片的溯源性问题, 采用自主设计的电解装置, 实现了在45号钢基体表面局部镀铬, 获得了厚度均匀的镀铬层, 可以满足磁吸力厚度测量仪标准片的要求。
Abstract
Aiming to the traceability of electroplated standard film for magnetic thickness gauge, an independently designed electroplating cell was applied to carry out local electroplating on 45# steel surface. A chromium electroplated coating with uniform thickness was achieved, which can meet the requirements of standard film for magnetic thickness gauge.
中图分类号 TQ153.1
所属栏目 应用技术
基金项目
收稿日期 2013/8/5
修改稿日期
网络出版日期
作者单位点击查看
备注袁学韬(1971-),高级工程师,博士,从事金属腐蚀与防护研究,
引用该论文: MIAO Hua-qing,YUAN Xue-tao,YAO Jing-jing,YAO Lei,HUA Zhi-qiang. Preparation of Chromium Electroplated Standard Film for Magnetic Thickness Gauge[J]. Corrosion & Protection, 2014, 35(3): 286
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李炳江,屠振密,毕四福,等. 三价铬镀铬工艺对铬镀层耐蚀性的影响[J]. 电镀与精饰,2010,32(6):15-18.
相关信息