搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
S2O2-3对Cu-15Ni-8Sn合金在NaCl溶液中点蚀的影响
          
Effect of S2O2-3 on Pitting Corrosion of Cu-15Ni-8Sn Alloy in Sodium Chloride Solutions

摘    要
采用动电位极化法对Cu-15Ni-8Sn合金的点蚀行为进行了研究,结果表明,在不同浓度的NaCl(0.01%,0.1%,1%和10%)溶液中,随着Cl-浓度的增大,Cu-15Ni-8Sn合金试样的耐点蚀性能下降,蚀孔半径显著增加。当向NaCl溶液中加入较低浓度(0.001,0.01,0.1 mol/L)的Na2S2O3时,Cu-15Ni-8Sn合金试样的点蚀敏感性降低,点蚀受到明显抑制。而当Na2S2O3的加入浓度逐渐升高到1 mol/L时,Cu-15Ni-8Sn合金试样耐点蚀性能没有提高。
标    签 Cu-15Ni-8Sn合金   点蚀   S2O32-   Cu-15Ni-8Sn alloy   pitting corrosion   S2O32-  
 
Abstract
The pitting corrosion of Cu-15Ni-8Sn alloy in solutions containing different concentrations of NaCl was studied by potentiodynamic polarization method. The results showed that with the increase of Cl- the radius of pits increased significantly, which indicating the decrease of the pitting corrosion resistance of the alloy. Addition of low concentration of Na2S2O3 into the NaCl solution, e.g. 0.001 mol/L, 0.01 mol/L and 0.1 mol/L, can inhibit the pit formation on the alloy surface. However, this inhibiting effect was eliminated when the concentration of Na2S2O3 increased to 1mol/L.

中图分类号 TG174

 
  中国光学期刊网论文下载说明


所属栏目 试验研究

基金项目 国家重点基础研究发展973计划(2014CB643306); 国家自然科学基金(51101098; 51303188); 上海市科委创新行动计划项目(12231204102)

收稿日期 2014/1/10

修改稿日期

网络出版日期

作者单位点击查看


备注张丽(1974-),副教授,博士,从事极端环境下材料的腐蚀与防护技术研究工作,

引用该论文: SHEN Yuan-yuan,ZHANG Li,YIN Bing,DONG Li-hua,YIN Yan-sheng. Effect of S2O2-3 on Pitting Corrosion of Cu-15Ni-8Sn Alloy in Sodium Chloride Solutions[J]. Corrosion & Protection, 2014, 35(9): 884


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】高爱国. 海底热液活动研究综述[J]. 海洋地质与第四纪地质,1996,16(1):103-110.
 
【2】金翔龙,初凤友. 大洋海底矿产资源研究现状及其发展趋势[J]. 东海海洋,2003,21(1):1-4.
 
【3】LEE J K. On the effect of substituting copper powder with cupric salt for the sintering process of W-Cu MIM Parts[J]. Int J Refract Met Hard Mater,2008,26(4):290-294.
 
【4】ABDEL Y K,FAYCAL H L,HIBA A,et al. Microstructures and textures of a Cu-Ni-Si alloy processed by high-pressure torsion[J]. Journal of Alloys and Compounds,2013,574:361-367.
 
【5】祁红璋,安建军,严彪. Cu-15Ni-8Sn合金的开发与应用现状[J]. 金属功能材料,2009,16(4):57-60.
 
【6】EASH J T. Microstructure and properties of Cu-Ni-Sn alloy[J]. Trans Met Soc AIME,1933,104:221-223.
 
【7】CORLISS J B,DYMOND J,GORDON L I. Submarine thermal springs on the galapagos rift[J]. Science,1979,203(4085):1073-1083.
 
【8】YOU C F,BICKLE M J. Evolution of an active sea-floor massive sulphide deposit[J]. Nature,1998,394(6694):668-671.
 
【9】李永发,王廷玉,蔡文达. 镍合金在含硫代硫酸根离子之氯化钠水溶液中的孔蚀研究[J]. 电化学,1999,5(1):18-24.
 
【10】CHOI D,WAS G. Pit growth in alloy 600/690 steam generator in simulated concentrated environments (Cu2+,Cl-,and SO2-4 )[J]. Corrosion,1990,46(1):100-104.
 
【11】IOFA Z A. Mechanism of the effect of hydrogen sulfide and inhibitors on iron corrosion in acid solutions[J]. Protection of Metal,1980(16):220-225.
 
相关信息
   标题 相关频次
 Cu-15Ni-8Sn合金在海水中的耐腐蚀性研究
 8
 镍基球形碳化钨复合涂层在高温高压饱和H2S溶液中腐蚀行为
 4
 0Cr13铁素体不锈钢在FeCl3溶液中的点蚀行为
 2
 15CrMo钢在含有SO42-的模拟汽轮机初凝水中的腐蚀特性
 2
 20号碳钢在模拟NaCl三元复合驱注入段溶液中的腐蚀行为
 2
 2205双相不锈钢在HCl溶液中点蚀的AFM和电化学分析
 2
 304不锈钢焊缝附近的点蚀损伤发展规律
 2
 316L不锈钢在FeCl3溶液中点蚀行为的电化学噪声检测
 2
 316L钢内衬复合管焊接接头的耐点蚀性能
 2
 3A21铝合金在乙二醇水溶液中的腐蚀行为
 2
 7075-TiB2原位铝基复合材料的腐蚀性能
 2
 Cl-,CO2和微量H2S共存时13Cr不锈钢的腐蚀性能
 2
 Cl-对304L不锈钢从点蚀到应力腐蚀转变行为的影响
 2
 Cl-浓度对2A12铝合金电化学行为的影响
 2
 EB104/EB202涂层对904L不锈钢的防腐蚀效果
 2
 GCr15轴承钢叶片环热处理后磁粉探伤异常的原因
 2
 GCr15轴承钢在盐酸溶液中的点蚀行为
 2
 NiAl-31Cr-3Mo合金的低温热腐蚀性能
 2
 P110油管腐蚀穿孔原因分析
 2
 S32750双相不锈钢六角头螺栓腐蚀失效分析
 2
 SO2-4对X80管线钢在含Cl-的NaHCO3溶液中点蚀行为影响
 2
 TP304不锈钢凝汽器管在不同工况下的腐蚀行为
 2
 U-Ti合金的奥氏体晶粒度检测技术
 2
 V-5Cr-5Ti合金富钛相析出区的显微维氏硬度测试
 2
 X52钢在含H2S/CO2混合气体的三甘醇溶液中的腐蚀行为
 2
 X80管线钢在0.5 mol/L NaHCO3+0.02 mol/L 强激光与粒子束NaCl溶液中的点腐蚀性能
 2
 板式换热器泄漏原因
 2
 保温原油储罐外壁腐蚀成因及防腐蚀措施
 2
 表面喷丸对800合金点蚀性能影响
 2
 表面织构化对摩擦学性能影响的研究进展
 2