纳米/超细晶奥氏体不锈钢腐蚀机制研究进展
Research Progress of Corrosion Resistance for Nano/Ultrafine-grained Austenite Stainless Steel
摘 要
晶粒细化作为强化金属材料的有效方法受到了研究者的广泛关注，其具有高强度、高硬度和良好的耐磨性等特点。同时,晶粒细化对奥氏体不锈钢的腐蚀性能及腐蚀机制影响也得到了广泛的关注。综述了纳米及超细晶奥氏体不锈钢材料的耐腐蚀性能研究进展，着重讨论了超细尺度结构，包括晶粒大小、相组成、孪晶等对不锈钢耐腐蚀性能影响的最新进展。
纳米结构
晶界
腐蚀机制
stainless steel
nanostructure
grain boundary
corrosion mechanism
Abstract
The grain refinement of austenite stainless steel is widely studied due to its enhanced mechanical properties, such as high strength, high hardness and good wear resistance. Meanwhile, the effect of nanocrystallines (NC) and ultrafine grains (UFG) on corrosion performance also attracts more attention. This paper focuses its attention mainly on the corrosion mechanism of the stainless steel with NC/UFG microstructure. The latest developments of corrosion mechanisms of the refined austenite stainless steels are introduced involving the microstructures of grain size, phase composition and twin.
中图分类号 TG172
所属栏目 专论
基金项目 国家自然科学基金(51271123; 11202134); 上海市教育委员会上海高校知识服务平台建设项目(ZF1225)
收稿日期 2014/1/22
修改稿日期
网络出版日期
作者单位点击查看
备注陈爱英(1973-)，副教授，博士，从事纳米金属材料制备及变形机制研究，
引用该论文: WANG Xiao-mei,LIU Fang-rong,ZHANG Yao,CHEN Ai-ying,PAN Deng. Research Progress of Corrosion Resistance for Nano/Ultrafine-grained Austenite Stainless Steel[J]. Corrosion & Protection, 2014, 35(11): 1069
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】YAN F K,YAN G Z,TAO N R,et al. Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles[J]. Acta Materialia,2012,60:1059-1071.
【2】LUO K Y,LUA J Z,ZHANG Y K,et al. Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austenitic stainless steel[J]. Materials Science and Engineering A,2011,528:4783-4788.
【3】LO K H,SHEK C H,LAI J K L. Recent developments in stainless steels[J]. Materials Science and Engineering R,2009,65:39-104.
【4】CHEN X H,LU J,LU L,et al. Tensile properties of a nanocrystalline 316L austenitic stainless steel[J]. Scripta Materialia,2005,52:1039-1044.
【5】MINORU F,HORITA Z J,Horita M,et al. The use of severe plastic deformation for microstructural control[J]. Materials Science and Engineering A,2002,324:82-89.
【6】AZUSHIMA A,KOPP R,KORHONEN A,et al. Severe plastic deformation (SPD) processes for metals[J]. CIRP Annals-Manufacturing Technology,2008,57:716-735.
【7】SERGUEEVA A V,STOLYAROV V V,VALIEV R Z,et al. Advanced mechanical properties of pure titanium with ultrafine grained structure[J]. Scripta Materialia,2001,45:747-752.
【8】UENO H,KAKIHATA K,KANEKO Y,et al. Enhanced fatigue properties of nanostructured austenitic SUS 316L stainless steel[J]. Acta Materialia,2011,59:7060-7069.
【9】QU S,HUANG C X,GAO Y L,et al. Tensile and compressive properties of AISI 304L stainless steel subjected to equal channel angular pressing[J]. Materials Science and Engineering A,2008, 475:207-216.
【10】ZHANG L Y,MA A B,JIANG J H,et al. Sulphuricacid corrosion of ultrafine-grained mild steel processed by equal-channel angular pressing[J]. Corrosion Science,2013,75:434-442.
【11】曹胜男,郭志超,王光灿. 低维纳米材料的制备方法与金属纳米材料[J]. 上海有色金属,2007,28(2):90-94.
【12】叶威,李瑛,王福会. 单相和双相不锈钢纳米涂层的电化学腐蚀行为[J]. 中国腐蚀与防护学报,2008,28(3):129-134.
【13】LU K,LU J. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment[J]. Materials Science and Engineering A,2004,375-377:38-45.
【14】MORDYUK B N,PROKOPENKO G I,VASYLYEV M A,et al. Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI-321 stainless steel[J]. Materials Science and Engineering A,2007,458:253-261.
【15】TAO N R,WANG Z B,TONG W P,et al. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment[J]. Acta Materialia,2002,50:4603-4616.
【16】ZHANG H W,HEI Z K,LIU G,et al. Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment[J]. Acta Materialia,2003,51:1871-1881.
【17】LIU G,LU J,LU K. Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening[J]. Materials Science and Engineering A,2000,286:91-95.
【18】ROLAND T,RETRAINT D,LU K,et al. Enhanced mechanical behavior of a nanocrystallised stainless steel and its thermal stability[J]. Materials Science and Engineering A,2007,445-446:281-288.
【19】YAN F K,LIU G Z,TAO N R,et al. Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles[J]. Acta Materialia,2012,60:1059-1071.
【20】CHEN X H,LU J,LU L,et al. Tensile properties of a nanocrystalline 316L austenitic stainless steel[J]. Scripta Materialia,2005,52:1039-1044.
【21】LU J Z,LUO K Y,ZHANG Y K,et al. Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel[J]. Acta Materialia,2010,58:5354-5362.
【22】CHEN A Y,RUAN H H,WANG J,et al. The influence of strain rate on the microstructure transition of 304 stainless steel[J]. Acta Materialia,2011,59:3697-3709.
【23】QU S,HUANG C X,GAO Y L,et al. Tensile and compressive properties of AISI 304L stainless steel subjected to equal channel angular pressing[J]. Materials Science and Engineering A,2008,475:207-216.
【24】RAVI K B,SHARMA S,MAHATO B. Formation of ultrafine grained microstructure in the austenitic stainless steel and its impact on tensile properties[J]. Materials Science and Engineering A,2011,528:2209-2216.
【25】ZHANG Z J,GAO Y,GUI Y,et al. Corrosion behaviour of nanocrystalline 304 stainless steel prepared by equal channel angular pressing[J]. Corrosion Science,2012,54:60-67.
【26】YE W,LI Y,WANG F H. The improvement of the corrosion resistance of 309 stainless steel in the transpassive region by nano-crystallization[J]. Electrochimica Acta,2009,54:1339-1349.
【27】DI SCHINO A,KENNY J M. Effects of the grain size on the corrosion behavior of refined AISI 304 austenitic stainless steels[J]. Journal of Materials Science Letters,2002,21:1631-1634.
【28】RALSTON K D,BIRBILIS N,DAVIES C H J. Revealing the relationship between grain size and corrosion rate of metals[J]. Scripta Materialia,2010,63:1201-1204.
【29】RALSTON K D,FABIJANIC D,BIRBILIS N. Effect of grain size on corrosion of high purity aluminium[J]. Electrochimica Acta,2011,56:1729-1736.
【30】YE W,LI Y,WANG F H. Effects of nanocrystallization on the corrosion behavior of 309 stainless steel[J]. Electrochimica Acta,2006,51:4426-4432.
【31】包乌日图巴雅拉,朱军,邱嘉杰. 非晶及纳米晶软磁材料耐腐蚀性能的研究现状[J]. 上海有色金属,2008,29(1):32-36.
【32】KRUPP U. Improving the resistance to intergranular cracking and corrosion at elevated temperatures by grain-boundary-engineering-type processing[J]. Journal of Materials Science,2008,43:3908-3916.
【33】HU C L,XIA S,LI H,et al. Improving the intergranular corrosion resistance of 304 stainless steel by grain boundary network control[J]. Corrosion Science,2011,53:1880-1886.
【34】SUN F L,MENG G Z,ZHANG T,et al. Electrochemical corrosion behavior of nickel coating with high density nano-scale twins (NT) in solution with Cl-[J]. Electrochimica Acta,2009,54:1578-1583.
【35】LEE H S,KIM D S,JUNG J S,et al. Influence of peening on the corrosion properties of AISI 304 stainless steel[J]. Corrosion Science,2009,51:2826-2830.
【36】LIN Y J，WEN H M，LI Y，et al. An analytical model for stress-induced grain growth in the presence of both second-phase particles and solute segregation at grain boundaries[J]. Acta Materialia,2014,82:304-315.
【37】吕爱强,张洋,李瑛,等. 异步轧制对表面纳米化316L不锈钢组织和性能的影响[J]. 金属学报,2005,41(3):271-276.
【38】HU C L,XIA S,LI H,et al. Improving the intergranular corrosion resistance of 304 stainless steel by grain boundary network control[J]. Corrosion Science,2011,53:1880-1886.
【39】RAABE D,HERBIG S S,LI Y D,et al. Grain boundary segregation engineering in metallic alloys:A pathway to the design of interfaces[J]. Current Opinion in Solid and Materials Science,2014,18(4):253-261.
【40】SHIMADA M,KOKAWA H,WANG Z J,et al. Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering[J]. Acta Materialia,2002,50:2331-2341.
【41】MICHIUCHI M,MICHIUCHI H,WANG Z J,et al. Twin-induced grain boundary engineering for 316 austenitic stainless steel[J]. Acta Materialia,2006,54:5179-5184.
【42】LU A Q,ZHANG Y,LI Y,et al. Effect of Nanocrystalline and Twin Boundaries on Corrosion Behavior of 316L Stainless Steel using SMAT[J]. Acta Metall Sin (Engl.Lett.),2006,19(3):183-189.
【43】BALUSAMY T,SANKARA N,RAVICHANDRAN T S N,et al. Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel[J]. Corrosion Science,2013,74:332-344.
【44】LALEH M,FARZAD K. Effect of surface nanocrystallization on the microstructural and corrosion characteristics of AZ91D magnesium alloy[J]. Journal of Alloys and Compounds,2011,509:9150-9156.
【45】CHUI P F,SUN K N,SUN C,et al. Effect of surface nanocrystallization induced by fast multiple rotation rolling on hardness and corrosion behavior of 316L stainless steel[J]. Applied Surface Science,2011,257:6787-6791.
【46】HAO Y W,DENG B,ZHONG C,et al. Effect of Surface Mechanical Attrition Treatment on Corrosion Behavior of 316 Stainless Steel[J]. Jouranal of Iron and Steel Research,International,2009,16(2):68-72.
【47】BALUSAMY T,SATENDRA K,SANKARA T S N N. Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel[J]. Corrosion Science,2010,52:3826-3834.
【2】LUO K Y,LUA J Z,ZHANG Y K,et al. Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austenitic stainless steel[J]. Materials Science and Engineering A,2011,528:4783-4788.
【3】LO K H,SHEK C H,LAI J K L. Recent developments in stainless steels[J]. Materials Science and Engineering R,2009,65:39-104.
【4】CHEN X H,LU J,LU L,et al. Tensile properties of a nanocrystalline 316L austenitic stainless steel[J]. Scripta Materialia,2005,52:1039-1044.
【5】MINORU F,HORITA Z J,Horita M,et al. The use of severe plastic deformation for microstructural control[J]. Materials Science and Engineering A,2002,324:82-89.
【6】AZUSHIMA A,KOPP R,KORHONEN A,et al. Severe plastic deformation (SPD) processes for metals[J]. CIRP Annals-Manufacturing Technology,2008,57:716-735.
【7】SERGUEEVA A V,STOLYAROV V V,VALIEV R Z,et al. Advanced mechanical properties of pure titanium with ultrafine grained structure[J]. Scripta Materialia,2001,45:747-752.
【8】UENO H,KAKIHATA K,KANEKO Y,et al. Enhanced fatigue properties of nanostructured austenitic SUS 316L stainless steel[J]. Acta Materialia,2011,59:7060-7069.
【9】QU S,HUANG C X,GAO Y L,et al. Tensile and compressive properties of AISI 304L stainless steel subjected to equal channel angular pressing[J]. Materials Science and Engineering A,2008, 475:207-216.
【10】ZHANG L Y,MA A B,JIANG J H,et al. Sulphuricacid corrosion of ultrafine-grained mild steel processed by equal-channel angular pressing[J]. Corrosion Science,2013,75:434-442.
【11】曹胜男,郭志超,王光灿. 低维纳米材料的制备方法与金属纳米材料[J]. 上海有色金属,2007,28(2):90-94.
【12】叶威,李瑛,王福会. 单相和双相不锈钢纳米涂层的电化学腐蚀行为[J]. 中国腐蚀与防护学报,2008,28(3):129-134.
【13】LU K,LU J. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment[J]. Materials Science and Engineering A,2004,375-377:38-45.
【14】MORDYUK B N,PROKOPENKO G I,VASYLYEV M A,et al. Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI-321 stainless steel[J]. Materials Science and Engineering A,2007,458:253-261.
【15】TAO N R,WANG Z B,TONG W P,et al. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment[J]. Acta Materialia,2002,50:4603-4616.
【16】ZHANG H W,HEI Z K,LIU G,et al. Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment[J]. Acta Materialia,2003,51:1871-1881.
【17】LIU G,LU J,LU K. Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening[J]. Materials Science and Engineering A,2000,286:91-95.
【18】ROLAND T,RETRAINT D,LU K,et al. Enhanced mechanical behavior of a nanocrystallised stainless steel and its thermal stability[J]. Materials Science and Engineering A,2007,445-446:281-288.
【19】YAN F K,LIU G Z,TAO N R,et al. Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles[J]. Acta Materialia,2012,60:1059-1071.
【20】CHEN X H,LU J,LU L,et al. Tensile properties of a nanocrystalline 316L austenitic stainless steel[J]. Scripta Materialia,2005,52:1039-1044.
【21】LU J Z,LUO K Y,ZHANG Y K,et al. Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel[J]. Acta Materialia,2010,58:5354-5362.
【22】CHEN A Y,RUAN H H,WANG J,et al. The influence of strain rate on the microstructure transition of 304 stainless steel[J]. Acta Materialia,2011,59:3697-3709.
【23】QU S,HUANG C X,GAO Y L,et al. Tensile and compressive properties of AISI 304L stainless steel subjected to equal channel angular pressing[J]. Materials Science and Engineering A,2008,475:207-216.
【24】RAVI K B,SHARMA S,MAHATO B. Formation of ultrafine grained microstructure in the austenitic stainless steel and its impact on tensile properties[J]. Materials Science and Engineering A,2011,528:2209-2216.
【25】ZHANG Z J,GAO Y,GUI Y,et al. Corrosion behaviour of nanocrystalline 304 stainless steel prepared by equal channel angular pressing[J]. Corrosion Science,2012,54:60-67.
【26】YE W,LI Y,WANG F H. The improvement of the corrosion resistance of 309 stainless steel in the transpassive region by nano-crystallization[J]. Electrochimica Acta,2009,54:1339-1349.
【27】DI SCHINO A,KENNY J M. Effects of the grain size on the corrosion behavior of refined AISI 304 austenitic stainless steels[J]. Journal of Materials Science Letters,2002,21:1631-1634.
【28】RALSTON K D,BIRBILIS N,DAVIES C H J. Revealing the relationship between grain size and corrosion rate of metals[J]. Scripta Materialia,2010,63:1201-1204.
【29】RALSTON K D,FABIJANIC D,BIRBILIS N. Effect of grain size on corrosion of high purity aluminium[J]. Electrochimica Acta,2011,56:1729-1736.
【30】YE W,LI Y,WANG F H. Effects of nanocrystallization on the corrosion behavior of 309 stainless steel[J]. Electrochimica Acta,2006,51:4426-4432.
【31】包乌日图巴雅拉,朱军,邱嘉杰. 非晶及纳米晶软磁材料耐腐蚀性能的研究现状[J]. 上海有色金属,2008,29(1):32-36.
【32】KRUPP U. Improving the resistance to intergranular cracking and corrosion at elevated temperatures by grain-boundary-engineering-type processing[J]. Journal of Materials Science,2008,43:3908-3916.
【33】HU C L,XIA S,LI H,et al. Improving the intergranular corrosion resistance of 304 stainless steel by grain boundary network control[J]. Corrosion Science,2011,53:1880-1886.
【34】SUN F L,MENG G Z,ZHANG T,et al. Electrochemical corrosion behavior of nickel coating with high density nano-scale twins (NT) in solution with Cl-[J]. Electrochimica Acta,2009,54:1578-1583.
【35】LEE H S,KIM D S,JUNG J S,et al. Influence of peening on the corrosion properties of AISI 304 stainless steel[J]. Corrosion Science,2009,51:2826-2830.
【36】LIN Y J，WEN H M，LI Y，et al. An analytical model for stress-induced grain growth in the presence of both second-phase particles and solute segregation at grain boundaries[J]. Acta Materialia,2014,82:304-315.
【37】吕爱强,张洋,李瑛,等. 异步轧制对表面纳米化316L不锈钢组织和性能的影响[J]. 金属学报,2005,41(3):271-276.
【38】HU C L,XIA S,LI H,et al. Improving the intergranular corrosion resistance of 304 stainless steel by grain boundary network control[J]. Corrosion Science,2011,53:1880-1886.
【39】RAABE D,HERBIG S S,LI Y D,et al. Grain boundary segregation engineering in metallic alloys:A pathway to the design of interfaces[J]. Current Opinion in Solid and Materials Science,2014,18(4):253-261.
【40】SHIMADA M,KOKAWA H,WANG Z J,et al. Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering[J]. Acta Materialia,2002,50:2331-2341.
【41】MICHIUCHI M,MICHIUCHI H,WANG Z J,et al. Twin-induced grain boundary engineering for 316 austenitic stainless steel[J]. Acta Materialia,2006,54:5179-5184.
【42】LU A Q,ZHANG Y,LI Y,et al. Effect of Nanocrystalline and Twin Boundaries on Corrosion Behavior of 316L Stainless Steel using SMAT[J]. Acta Metall Sin (Engl.Lett.),2006,19(3):183-189.
【43】BALUSAMY T,SANKARA N,RAVICHANDRAN T S N,et al. Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel[J]. Corrosion Science,2013,74:332-344.
【44】LALEH M,FARZAD K. Effect of surface nanocrystallization on the microstructural and corrosion characteristics of AZ91D magnesium alloy[J]. Journal of Alloys and Compounds,2011,509:9150-9156.
【45】CHUI P F,SUN K N,SUN C,et al. Effect of surface nanocrystallization induced by fast multiple rotation rolling on hardness and corrosion behavior of 316L stainless steel[J]. Applied Surface Science,2011,257:6787-6791.
【46】HAO Y W,DENG B,ZHONG C,et al. Effect of Surface Mechanical Attrition Treatment on Corrosion Behavior of 316 Stainless Steel[J]. Jouranal of Iron and Steel Research,International,2009,16(2):68-72.
【47】BALUSAMY T,SATENDRA K,SANKARA T S N N. Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel[J]. Corrosion Science,2010,52:3826-3834.
相关信息
