Internal Corrosion Causes of Nickel Plated Drill Pipe
摘 要
某油田在钻杆下井作业前的检测中发现2支镀镍钻杆内壁腐蚀严重,为了查明此次钻杆腐蚀的原因,对钻杆内壁腐蚀产物进行了形貌宏观和微观分析,微区成分分析。结果表明,镀镍钻杆内镀层存在漏镀与显微孔洞是钻杆产生腐蚀的主要原因; 原油中的H2S溶解于水形成氢硫酸加速钻杆腐蚀,且氯离子的存在使得局部腐蚀进一步加剧。建议规范生产流程,改善镀层质量,避免镀层中存在漏镀或孔洞等缺陷,提高钻杆的抗腐蚀能力。
Abstract
Before drilling down operation, severe internal corrosion was discovered in two nickel-plated drill pipes. In order to find out the causes of the drill pipe corrosion, macro and micro morphology analysis, micro-composition analysis of corrosion product were taken. The results showed that the presence of leaks and microscopic pores on nickel plated layer were the main reasons which leaded to drill pipe corrosion. H2S of crude oil dissolved in water and formed hydrosulphuric acid and thus also accelerated drill pipe corrosion, and the presence of chloride ions made the localized corrosion further. Standardizing the production process, improving the quality of plated-layer, and avoiding the leaks, microscopic pores or other defects in plated-layer were proposed to improve the corrosion resistance of drill pipe.
中图分类号 TG174
所属栏目 失效分析
基金项目
收稿日期 2014/1/9
修改稿日期
网络出版日期
作者单位点击查看
联系人作者赵金凤(zhao_jf@126.com)
备注赵金凤(1985-),工程师,硕士,从事石油钻具的研发和失效分析,
引用该论文: ZHAO Jin-feng,YU Shi-jie,YUAN Peng-bin. Internal Corrosion Causes of Nickel Plated Drill Pipe[J]. Corrosion & Protection, 2014, 35(11): 1173
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张宝根. 钢铁基体镀镍保护材料的研制[J]. 电镀与涂饰,2002,21(5):22-25.
【2】刘永健,王印培. 化学镀镍工艺对镀层耐蚀耐磨性的影响[J]. 腐蚀与防护,2001,22(7):293-296.
【3】万里平,孟英峰. H2S/CO2共存聚合物钻井液中腐蚀产物膜分析[J]. 应用基础与工程科学学报,2012,20(5):863-873.
【4】周琦,徐鸿麟. 管线钢在含硫化氢及高压二氧化碳饱和的NACE溶液中的腐蚀行为[J]. 兰州理工大学学报,2005,31(1):31-34.
【5】郭志军,陈东风. 油气田高含H2S、CO2和Cl-环境下压力容器腐蚀机理研究进展[J]. 石油化工设备,2008,37(5):53-57.
【6】艾芳芳,徐小连. Cl-浓度对油井管用钢湿H2S腐蚀行为的影响[J]. 金属热处理,2013,38(4):28-31.
【2】刘永健,王印培. 化学镀镍工艺对镀层耐蚀耐磨性的影响[J]. 腐蚀与防护,2001,22(7):293-296.
【3】万里平,孟英峰. H2S/CO2共存聚合物钻井液中腐蚀产物膜分析[J]. 应用基础与工程科学学报,2012,20(5):863-873.
【4】周琦,徐鸿麟. 管线钢在含硫化氢及高压二氧化碳饱和的NACE溶液中的腐蚀行为[J]. 兰州理工大学学报,2005,31(1):31-34.
【5】郭志军,陈东风. 油气田高含H2S、CO2和Cl-环境下压力容器腐蚀机理研究进展[J]. 石油化工设备,2008,37(5):53-57.
【6】艾芳芳,徐小连. Cl-浓度对油井管用钢湿H2S腐蚀行为的影响[J]. 金属热处理,2013,38(4):28-31.
相关信息