搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
GB/T 228.1-2010中试验方法与试验机闭环控制的关系
          
Relationship between Test Methods in GB/T 228.1-2010 and Closed-loop Control of Test Machines

摘    要
介绍了全闭环控制试验机的控制方式模型, 分析了GB/T 228.1-2010中方法A和方法B在试验机上控制模式的实现;介绍了方法A和方法B在加载过程中进行控制通道切换时应注意的关键点;简述了试验加载速率的设置范围和试验机速率控制精度的关系。
标    签 拉伸试验方法   控制模式   通道切换   加载速率   tensile test method   control mode   channel switching   loading speed  
 
Abstract
The control model of closed-loop controlled testing machines was described and the realization of the control modes of method A and method B in GB/T 228.1-2010 on the test machine was analyzed. The key points should be paid attention to were introduced when changing the control channel during the loading process for method A and method B. Relationship between the setting range of loading rate and the speed control accuracy of testing machine was expounded.

中图分类号 TG115.5 TH871.1

 
  中国光学期刊网论文下载说明


所属栏目 专题报道

基金项目

收稿日期 2013/10/29

修改稿日期

网络出版日期

作者单位点击查看

备注张小康(1969-),男,本科。

引用该论文: ZHANG Xiao-kang. Relationship between Test Methods in GB/T 228.1-2010 and Closed-loop Control of Test Machines[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2014, 50(4): 246~248
张小康. GB/T 228.1-2010中试验方法与试验机闭环控制的关系[J]. 理化检验-物理分册, 2014, 50(4): 246~248


被引情况:


【1】乐金涛,李玲,刘乐, "对拉伸试验方法标准GB/T228.1-2010的思考",理化检验-物理分册 51, 83-86(2015)



论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
相关信息
   标题 相关频次
 对金属材料拉伸试验方法标准的几点思考
 2
 对金属材料室温拉伸试验方法标准GB/T 228.1-2010及ISO 6892-1:2016的修订建议
 2
 对拉伸试验方法标准GB/T228.1-2010的思考
 2
 高强度铝合金钻杆的拉伸试验方法
 2
 拉伸试验方法A2的横梁位移速率补偿方法
 2
 应变速率控制对金属材料静载拉伸性能的影响
 2
 影响铝合金弹性模量测量精度的因素
 2
 1Cr18Ni9Ti钢管的常温蠕变性能
 1
 42CrMo合金钢棒材硬度及显微组织控制
 1
 高强钢微冲剪试验影响因素的有限元模拟
 1
 基于模块化多电平变流器的柔性直流输电技术
 1
 加载速率对硅橡胶拉伸断裂行为的影响
 1
 温度与加载速率对X70级管线钢韧脆转化现象的影响
 1
 用微型杯突试验法测试超高强度铝合金强度
 1