Consistency Analysis on Requirements of Tensile Rate of GB/T 228.1-2010
摘 要
在拉伸试验中, 关于如何执行GB/T 228.1-2010中的“方法A”, 如何计算考虑试验机系统的柔度后估算的横梁位移速率, 在理解和贯彻GB/T 228.1-2010过程中存在不同的看法, 为此围绕该方面进行了深入的分析及探讨, 以保证测试技术的统一性与一致性, 更好地贯彻执行GB/T 228.1-2010中的“方法A”。
Abstract
During the tensile test, about how to adopt “Method A” of GB/T 228.1-2010 and how to calculate the estimated crosshead separation rate after considering compliance of the testing machine system, there had different views during process of understanding and implementing GB/T 228.1-2010. So thorough analysis and discussion were carried out to ensure the uniformity and consistency of the testing technology and to better implement “Method A” of GB/T 228.1-2010.
中图分类号 TG115.5
所属栏目 专题报道
基金项目
收稿日期 2014/3/19
修改稿日期
网络出版日期
作者单位点击查看
备注郑文龙(1950-), 男, 高级工程师。
引用该论文: ZHENG Wen-long,DENG Xing-lin,WANG Chun-hua,LE Jin-tao. Consistency Analysis on Requirements of Tensile Rate of GB/T 228.1-2010[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2014, 50(6): 390~393
郑文龙,邓星临,王春华,乐金涛. 关于GB/T 228.1-2010对拉伸速率要求一致性的分析[J]. 理化检验-物理分册, 2014, 50(6): 390~393
被引情况:
【1】李和平, "关于拉伸试验标准GB/T 228.1-2010主要争论问题的探讨",理化检验-物理分册 52, 597-602(2016)
【2】李荣锋,凃应宏, "关于GB/T228.1-2010的几点修订建议",理化检验-物理分册 50, 863-865(2014)
【3】王 燕,路 通,姚 强,王 琼,朱宇宏,朱晓林, "浅析GB/T 32498-2016《金属基复合材料拉伸试验 室温试验方法》",理化检验-物理分册 52, 607-609(2016)
【4】李和平,周星,沈佳谊,罗丹霞, "根据21个实验室拉伸验证试验结果分析GB/T 228.1-2010中存在的问题",理化检验-物理分册 50, 703-707(2014)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB/T 228.1-2010金属材料 拉伸试验 第1部分:室温试验方法[S].
【2】ASTM E8/E8M-2013aStandard test methods for tension testing of metallic materials[S].
【3】ISO 6892-1:2009Metallic materials—Tensile testing—Part 1:Method of test at room temperature[S].
【2】ASTM E8/E8M-2013aStandard test methods for tension testing of metallic materials[S].
【3】ISO 6892-1:2009Metallic materials—Tensile testing—Part 1:Method of test at room temperature[S].
相关信息