Application of Outside Micrometer in Sample Moving Device for Jominy Test
摘 要
将报废的计量器具——外径千分尺用于端淬试验硬度测试时的试样移动装置上, 通过旋转外径千分尺的测量筒, 进而带动丝杆, 由丝杆推动试样在硬度计底座上做水平移动, 从而较好地实现了端淬试样硬度测试点的准确定位, 该方法不仅简便快捷, 同时提高了试样定位精度。
Abstract
The scrapped measuring appliance-outside micrometer was used for Jominy sample moving device when hardness test. By rotating measuring cylinder of the outside micrometer to drive the screw rod, the screw rod would push the Jominy sample moving horizontally on the hardness tester base to achieve accurate positioning of the test points. This method is simple and fast, and could improve the sample positioning accuracy.
中图分类号 TG142.1
所属栏目 实践经验
基金项目
收稿日期 2013/8/31
修改稿日期
网络出版日期
作者单位点击查看
备注赵基(1959-), 男, 工程师, 学士。
引用该论文: ZHAO Ji,DU Chao. Application of Outside Micrometer in Sample Moving Device for Jominy Test[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2014, 50(6): 432~433
赵基,杜超. 外径千分尺在端淬试验试样移动装置上的应用[J]. 理化检验-物理分册, 2014, 50(6): 432~433
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB/T 225-2006钢淬透性的末端淬火试验方法(Jominy试验)[S].
【2】忻栋. 端淬试验可疑数据的分析[J]. 特钢技术, 2006(1):35-37.
【3】董孟宪. 钢淬透性的末端淬火试验方法标准探讨[J]. 冶金标准化与质量, 2009(5):36-39, 45.
【2】忻栋. 端淬试验可疑数据的分析[J]. 特钢技术, 2006(1):35-37.
【3】董孟宪. 钢淬透性的末端淬火试验方法标准探讨[J]. 冶金标准化与质量, 2009(5):36-39, 45.
相关信息