Effect of Zero Impact Energy on Strength and Toughness of ZG06Cr13Ni4Mo Stainless Steel
摘 要
ZG06Cr13Ni4Mo不锈钢经不同热处理工艺处理后, 对其进行了拉伸试验、夏比(V型缺口)零度冲击吸收能量试验、韧脆转变温度检测, 分析了零度冲击吸收能量同其他力学性能指标的相关性。结果表明: 并不是零度冲击吸收能量越高越好, 当零度冲击吸收能量高于149.1 J后, 随着冲击吸收能量增高, 强度、硬度会降低, 甚至达不到该材料的指标要求, 只有零度冲击吸收能量控制在适当的范围内, 该材料才具有较好的强韧性。
Abstract
After different heat treatment process of ZG06Cr13Ni4Mo stainless steel, the tensile strength, Charpy (V-notch) zero impact absorbing energy and ductile transition temperature were detected, and the correlation of zero impact absorbing energy with other mechanical performance index was analyzed. The results showed that it did not mean that the zero impact absorbing energy was the higher the better. When the zero impact absorbing energy was higher than 149.1 J, with high impact energy absorption, the strength and hardness would reduce, even did not meet the requirements of the material indicators, only the zero impact absorbing energy was controled in appropriate range, the material had good strength and toughness.
中图分类号 TG142.1
所属栏目 试验与研究
基金项目 宁夏自然科学基金项目(NZ12291)
收稿日期 2013/7/15
修改稿日期
网络出版日期
作者单位点击查看
备注张锦(1965-), 女, 高级工程师, 工学学士。
引用该论文: ZHANG Jin,ZHANG Rui-xue,MA Wen-jin. Effect of Zero Impact Energy on Strength and Toughness of ZG06Cr13Ni4Mo Stainless Steel[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2014, 50(7): 465~467
张锦,张瑞雪,马文进. 零度冲击吸收能量对ZG06Gr13Ni4Mo不锈钢强韧性的影响[J]. 理化检验-物理分册, 2014, 50(7): 465~467
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】杨学桐.金相检验[M].北京: 中国计量出版社, 2008: 148-149.
【2】GB 229-2007金属材料夏比摆锤冲击试验方法[S].
【3】陈惠珍.热处理对ZG0Cr13Ni4Mo钢组织和性能的影响[J].物理测试, 1992(4):26-32.
【4】张锦, 张瑞雪.δ-Fe对ZG06Gr13Ni4Mo不锈钢韧脆转变温度的影响[J].理化检验-物理分册, 2013, 49(3): 139-143.
【5】于兆斌, 张庄.921A钢的韧脆转变温度研究[J].理化检验-物理分册, 2006, 42(7): 332-334.
【2】GB 229-2007金属材料夏比摆锤冲击试验方法[S].
【3】陈惠珍.热处理对ZG0Cr13Ni4Mo钢组织和性能的影响[J].物理测试, 1992(4):26-32.
【4】张锦, 张瑞雪.δ-Fe对ZG06Gr13Ni4Mo不锈钢韧脆转变温度的影响[J].理化检验-物理分册, 2013, 49(3): 139-143.
【5】于兆斌, 张庄.921A钢的韧脆转变温度研究[J].理化检验-物理分册, 2006, 42(7): 332-334.
相关信息