Fracture Analysis on Steel Wire Rod Using for Welding
摘 要
采用低倍检验、金相检验及化学成分分析等方法, 对焊接用钢盘条在拉拔过程中出现断裂失效的现象进行了分析。结果表明: 钢盘条在拉拔过程中出现了严重的加工硬化, 导致表面裂纹形成和断裂失效。
Abstract
Methods such as macroscopic evaluation, metallographic examination and chemical composition analysis were used to analyze the fracture in drawing process of steel wire rod for welding. The results showed that surface crack and brittle fracture were formed due to serious work hardening during drawing process.
中图分类号 TG356.4+6
所属栏目 质量控制与失效分析
基金项目
收稿日期 2013/8/7
修改稿日期
网络出版日期
作者单位点击查看
备注黄海玲(1977-), 女, 工程师, 工程硕士。
引用该论文: HUANG Hai-ling,CHEN Qing-feng. Fracture Analysis on Steel Wire Rod Using for Welding[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2014, 50(7): 522~525
黄海玲,陈庆丰. 焊接用钢盘条断裂分析[J]. 理化检验-物理分册, 2014, 50(7): 522~525
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王先逵.金属材料的冷塑性加工[M].北京: 机械工业出版社, 2008.
【2】徐效谦, 阴绍芬.特殊钢钢丝[M].北京: 冶金工业出版社, 2005.
【3】刘开升, 于同伝, 许双应.高强度合金焊丝用盘条拉拔试验分析[C]//2006年安徽焊接技术交流会会议论文集.铜陵:2006: 48-51.
【2】徐效谦, 阴绍芬.特殊钢钢丝[M].北京: 冶金工业出版社, 2005.
【3】刘开升, 于同伝, 许双应.高强度合金焊丝用盘条拉拔试验分析[C]//2006年安徽焊接技术交流会会议论文集.铜陵:2006: 48-51.
相关信息