Investigation of the Feasibility in Using Conventional Ultrasonic Testing to the Nuzzle Welds with Particular Structure
摘 要
某公司承造的60.5 m多用途系列拖轮导流罩焊缝特殊结构,通过制作对比试块进行试验,探讨了使用常规超声波探伤方法检验此类焊缝的可行性。试验表明,由于会存在部分区域漏检和误判的可能,常规超声波探伤方法对于该导流罩主焊缝及其它类似特殊结构的检测,仅能作为参考辅助手段,不推荐使用。
Abstract
This paper chooses the nuzzle welds with particular structure of 60.5 m multi-purpose offshore support vessels manufactured by a company as the object under investigation. By making the reference test blocks and carrying on the experiment, the feasibility investigation of conventional ultrasonic testing to this kind of welds is discussed. Experimental results showed that the conventional ultrasonic testing was used only for subsidiary means, and was not recommended as a main method for the nuzzle weld and similar structures.
中图分类号 TG115.28
所属栏目 试验研究
基金项目
收稿日期 2013/6/20
修改稿日期
网络出版日期
作者单位点击查看
备注李北南(1987-),男,学士,主要从事船舶及石油化工设备无损检测相关工作。
引用该论文: LI Bei-nan,WU Wang-ping,ZHANG Bing,ZHOU Cheng. Investigation of the Feasibility in Using Conventional Ultrasonic Testing to the Nuzzle Welds with Particular Structure[J]. Nondestructive Testing, 2014, 36(1): 67~70
李北南,巫旺平,张兵,周成. 导流罩焊缝特殊结构常规超声波探伤的可行性[J]. 无损检测, 2014, 36(1): 67~70
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】熊仕涛.船舶概论[M].哈尔滨:哈尔滨工程大学出版社,2006.
【2】辽宁省质量技术监督局特种设备处,辽宁省特种设备无损检测人员资格考核委员会.超声波检测[M].沈阳:辽宁大学出版社,2008.
【3】JB/T 4730.3—2005承压设备无损检测第3部分:超声检测[S].
【2】辽宁省质量技术监督局特种设备处,辽宁省特种设备无损检测人员资格考核委员会.超声波检测[M].沈阳:辽宁大学出版社,2008.
【3】JB/T 4730.3—2005承压设备无损检测第3部分:超声检测[S].
相关信息