Ultrasonic Testing for Parallelogram Section Welded Joints
摘 要
黄冈公铁两用长江大桥采用了平行四边形截面整体节点焊缝形式。根据焊缝受力状态确定了每条焊缝的具体检测要求,针对8种不同的特殊角接接头拟定了具有针对性的超声检测方法,分别采用直探头和斜探头对焊缝进行检测。实践证明,检测结果准确可靠,能够满足工艺规范的要求。
Abstract
The Huang gang Yangtze River railway-highway combined bridge adopted parallelogram section integral node, and the test details required by each welding line are conformed to its stress condition. The specific UT methods are drawn up on the basis of eight different special angle welding joints, and the normal probe and angle probe are used separately for the UT test. The accuracy of the test results was proven by practice. The test scheme meets the requirements of the technological specification.
中图分类号 TG115.28
所属栏目 试验研究
基金项目
收稿日期 2013/4/11
修改稿日期
网络出版日期
作者单位点击查看
备注田代才(1980-),硕士,主要从事桥梁钢结构,建筑钢结构,大、中型起重机械的超声、磁粉、射线无损检测工作。
引用该论文: TIAN Dai-cai,ZHANG He-wu. Ultrasonic Testing for Parallelogram Section Welded Joints[J]. Nondestructive Testing, 2014, 36(2): 25~28
田代才,张鹤武. 平行四边形截面整体节点焊缝的超声波检测[J]. 无损检测, 2014, 36(2): 25~28
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】TB 10212—2009铁路钢桥制造规范[S].
【2】GB 11345—1989钢焊缝手工超声波探伤方法和探伤结果分级[S].
【2】GB 11345—1989钢焊缝手工超声波探伤方法和探伤结果分级[S].
相关信息