搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
穿透分层腐蚀缺陷对磁致伸缩导波信号的衰减影响
          
The Attenuation Effect of Pierced Delamination Corrosion on Magnetostrictive Guided Wave

摘    要
磁致伸缩导波检测技术对管道具有高效、全横截面检测等优点,但导波的检测效果易受多种因素,如弯头、支架和焊缝等的影响。针对检测试验中发现的分层腐蚀缺陷,通过解剖等试验手段,开展其对磁致伸缩导波信号的衰减影响的试验。试验结果表明,穿透分层腐蚀缺陷对导波信号的衰减影响剧烈,且难于用其他检测方法验证。
标    签 磁致伸缩   导波   穿透分层腐蚀   无损检测   Magnetostrictive   Guided wave   Pierced delamination corrosion   Nondestructive testing  
 
Abstract
The technology of magnetostrictive guided waves has been extensively applied in pipeline detection because of the excellent advantages, high efficiency and comprehensive detection of cross section, for example. However, the effectiveness of guided wave detection technique is affected by various factors, such as elbow, bracket bearing and welds, which might lead to detection failure. In this paper, based on corroded lamination defects which are discovered in the experiments, the attenuation effect of magnetostrictive guided waves caused is investigated with careful anatomy. The results show that the laminated corrosion defect has severe impact on the signals loss and it is also difficult to be determined by other non-destructive testing methods also.

中图分类号 TG115.28

 
  中国光学期刊网论文下载说明


所属栏目 试验研究

基金项目

收稿日期 2013/9/20

修改稿日期

网络出版日期

作者单位点击查看

备注张晓斌(1972-),男,博士,高级工程师,主要从事先进无损检测技术研究、失效分析。

引用该论文: ZHANG Xiao-bin,HUANG Zhen,HUANG Long-peng,LI Kun-xiang,WEI Yu-wei. The Attenuation Effect of Pierced Delamination Corrosion on Magnetostrictive Guided Wave[J]. Nondestructive Testing, 2014, 36(5): 52~54
张晓斌,黄震,黄龙鹏,黎坤祥,魏玉伟. 穿透分层腐蚀缺陷对磁致伸缩导波信号的衰减影响[J]. 无损检测, 2014, 36(5): 52~54


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】PAVLAKOVIC B, LOWE M J S, ALLEYNE D N, et al. Disperse: a general purpose program for creating dispersion curves[C]// Review of Progress in Quantitative NDE. New York: Plenum Press,1997:185-192.
 
【2】BAY H, SHAH A, POPPLEWELL N, et al. Scattering of guided waves by circumferential cracks in steel pipes[C]// Review of progress in Quantitative NDE. New York: Plenum Press,2001:188-194.
 
【3】VOGT T, ALLEYNE D, PAVLAKOVIC B. Application of guided wave technology to tube inspection[C]// Berlin: ECNDT, 2006.
 
【4】王禹钦,王维斌,陈长坤,等.输气管道超声导波检测技术[J].无损检测,2008,30(9):617-619.
 
【5】董为荣,帅健,许葵.管道T(0,1)模态导波检测数值模拟研究[J].无损检测,2008,30(3):149-152.
 
相关信息
   标题 相关频次
 钢轨轨底斜裂纹的超声导波散射特性
 4
 磁测应力技术的现状及发展
 3
 基于超声导波技术的长输管道无损检测
 3
 埋地管道无损检测技术
 3
 《无损检测》2018年专题报道征稿启事
 2
 《无损检测》2018年专题报道征稿启事
 2
 2018年度ASNT创新研究奖:改善结构健康监测的磁致伸缩传感器
 2
 20CrMnTi钢渗碳淬火硬化层深度的磁矫顽力检测
 2
 300M钢热损伤的巴克豪森检测
 2
 35号冷轧钢在不同阶段应力作用下的磁效应特征
 2
 ASNT SNT-TC-1A人员认证在我国的发展情况
 2
 CNDT&E“云”检测与评价技术
 2
 DR检测技术在空调零部件焊接领域的应用
 2
 Excel软件在无损检测资料整理中的应用
 2
 FRP片材加固界面补丁式剥离损伤的光纤检测技术
 2
 GIS盆式绝缘子模拟缺陷的X-DR成像检测
 2
 ISO 17635:2010标准主要规定内容及其国内应用现状
 2
 ISO 9712-2012与TSGZ 8001-2019标准的主要异同解析
 2
 L458M钢管道无损检测缺陷产生原因
 2
 NB/T47013-2015《承压设备无损检测》中工艺验证的实施方法
 2
 NDT集成新技术时代的到来
 2
 TaW薄板分层缺陷检测及成因分析
 2
 TMR传感器及其在电磁检测中的应用
 2
 TOFD检测中变形波信号和非相关信号的识别
 2
 WiFi无线技术在巴克豪森无损检测系统中的应用
 2
 X射线数字成像技术在预应力索灌浆质量检测中的应用
 2
 奥氏体不锈钢中径管焊缝超声爬波探伤
 2
 奥氏体不锈钢中马氏体含量的相关无损检测方法
 2
 奥氏体锅炉管氧化皮堆积厚度脉冲涡流检测
 2
 波音飞机无损检测手册编制方法
 2