Eddy Current Examination Capabilities on Steam Generator Tubes
摘 要
蒸汽发生器传热管的涡流检测对核电站的安全运行十分重要。由于传热管存在的缺陷大部分为降质缺陷, 且较常见的类型为体积效应较小的缺陷。RSEM规范中要求涡流检测可以发现体积为1 mm3的缺陷, 对涡流检验系统的能力进行了试验分析, 结果表明其检测能力可以满足国际标准的规定。
Abstract
Eddy current examination of the steam generator tubes was critical to the safe and economical operation of power stations. The most defect forms of the steam generator tubes are degradation and more frequmtly encountered defects are volumetrically small ones. In RSEM, it requires that 1 mm3 volume can be detected. The examination capability is researched in this paper. Through analysis of result data, the examination capability can meet the requirement of international standard.
中图分类号 TG115.28
所属栏目 试验研究
基金项目
收稿日期 2013/9/26
修改稿日期
网络出版日期
作者单位点击查看
备注王元辉(1980-), 男, 工程师, 主要从事核设备的涡流检测工作。
引用该论文: WANG Yuan-hui,YUAN Li. Eddy Current Examination Capabilities on Steam Generator Tubes[J]. Nondestructive Testing, 2014, 36(9): 11~13
王元辉,袁骊. 蒸汽发生器传热管涡流检测能力试验[J]. 无损检测, 2014, 36(9): 11~13
被引情况:
【1】黄晓锋,韩捷,桂正, "蒸汽发生器传热管加工打磨痕迹涡流检测信号幅值的影响因素",无损检测 37, 81-83(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】宋志刚.中国压水堆蒸汽发生器传热管的研究及国产化[J].钢铁研究学报, 2013, 25(08):1-5.
【2】杨宝初.传热管通孔涡流信号研究[J].无损检测, 1998, 20(05): 132-133.
【3】廖述圣,聂勇, 陈德智.核电站蒸汽发生器传热管涡流信号的有限元仿真[J].无损检测, 2007, 29(01): 6-8.
【4】陈德智,黄振华,廖述圣,等.蒸汽发生器管道涡流检测细小缺陷的计算[J].华中科技大学学报( 自然科学版),2007(08): 41-43.
【2】杨宝初.传热管通孔涡流信号研究[J].无损检测, 1998, 20(05): 132-133.
【3】廖述圣,聂勇, 陈德智.核电站蒸汽发生器传热管涡流信号的有限元仿真[J].无损检测, 2007, 29(01): 6-8.
【4】陈德智,黄振华,廖述圣,等.蒸汽发生器管道涡流检测细小缺陷的计算[J].华中科技大学学报( 自然科学版),2007(08): 41-43.
相关信息