Mechanism and Application of DR Inspection Technology in Submerged Arc Welded Pipe Weld
摘 要
介绍了DR(数字射线)检测技术在埋弧焊管焊缝检测的机理, 进行了埋弧焊缝检测灵敏度、空间分辨率、焊接缺陷检出效果试验。结果表明: 该项技术能够达到埋弧焊缝射线检测标准的要求, 焊接缺陷图像显示清晰、噪声低、灵敏度高, 是埋弧焊钢管焊缝缺陷快速、高效、可行的射线检测新技术。
Abstract
This article introduces the working principle of DR inspection technology in submerged arc welded pipe radiographic testing. In this article, the sensitivity of submerged arc welding defect detection, spatial resolution and defect inspection rate and accuracy are tested. The result shows that this technology can meet the requirements of submerged arc welding seam radiographic testing standards. The defect image of DR is clear, with low noise and high sensitivity. The DR inspection technology is a fast, efficient and feasible method for submerged arc welded steel pipe weld radiographic testing.
中图分类号 TG115.28
所属栏目 2014远东无损检测新技术论坛论文精选
基金项目
收稿日期 2014/6/25
修改稿日期
网络出版日期
作者单位点击查看
备注巨西民(1956-), 男, 高级工程师, 主要从事石油管材无损检测技术研究。
引用该论文: JU Xi-min,JIANG Zhong-yin,LAN Chuan,TANG Yan-lin,LI Xiao-min. Mechanism and Application of DR Inspection Technology in Submerged Arc Welded Pipe Weld[J]. Nondestructive Testing, 2014, 36(10): 29~31
巨西民,蒋中印,兰川,唐彦林,李晓敏. 埋弧焊钢管焊缝DR检测机理及应用[J]. 无损检测, 2014, 36(10): 29~31
被引情况:
【1】巩德兴,姚力,路君,赖德明,李振梅, "基于X射线连续源的数字成像检测技术的应用",无损检测 37, 13-15(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王晓香.我国油气长输管线用焊接钢管生产技术的发展与展望[J] .钢管, 2004, 33(3): 7-13.
【2】郑世才.射线实时成像检验技术[J].无损检测, 2000, 22(7): 328-336.
【3】杜朝伟, 唐晓薇, 翟俊鹏, 等.碘化铯非晶硅平板探测器的原理及应用[J].中国医学装备, 2009(6): 10-13.
【4】王化龙, 范春雷, 姜凯.X射线DR技术在铝合金铸件检测中的应用[J].影像技术, 2012(6): 47-55.
【5】严绍书.X射线平板数字成像技术在螺施焊缝检测中的应用[J].焊管, 2011, 34(2): 21-25.
【6】蒋太秋, 张圣光, 王坤显, 等.DR平板检测技术在螺旋埋弧焊管检测中的应用[J].焊管, 2010, 33(2): 57-59.
【2】郑世才.射线实时成像检验技术[J].无损检测, 2000, 22(7): 328-336.
【3】杜朝伟, 唐晓薇, 翟俊鹏, 等.碘化铯非晶硅平板探测器的原理及应用[J].中国医学装备, 2009(6): 10-13.
【4】王化龙, 范春雷, 姜凯.X射线DR技术在铝合金铸件检测中的应用[J].影像技术, 2012(6): 47-55.
【5】严绍书.X射线平板数字成像技术在螺施焊缝检测中的应用[J].焊管, 2011, 34(2): 21-25.
【6】蒋太秋, 张圣光, 王坤显, 等.DR平板检测技术在螺旋埋弧焊管检测中的应用[J].焊管, 2010, 33(2): 57-59.
相关信息