Finite Element Analysis of Influence for Magnetic Particle Inspection Sensitivity by Yoke Placement
摘 要
磁轭法是磁粉检测中最常用的检测方法, 由于工件外形不同, 会产生不同的磁轭放置方式, 采用有限元分析的方法对磁轭放置方式进行仿真模拟, 分析不同放置方式下的磁感应强度, 得到放置方式对于磁粉检测的影响, 对现场磁粉检测具有一定的指导作用。
Abstract
Magnetic yoke method is the usually inspecting method in MPI, and there will be different placement due to the different shape of workpiece. This paper simulate the yoke placement with finite element analysis method and gets the influence of yoke placement on MPI and shall provide guidance for MPI in-situ.
中图分类号 TG115.28
所属栏目 试验研究
基金项目 国家科技重大专项“深水水下生产设施制造、测试装备及技术”资助项目(2011ZX05027-004)
收稿日期 2014/1/23
修改稿日期
网络出版日期
作者单位点击查看
备注刁海波(1983-), 男, 工程师, 主要从事海洋工程无损检测, 焊接检验工作。
引用该论文: DIAO Hai-bo,SUN Xiao-ming,MA Jing-jing,HUANG Xue-bo,CHEN Xin-yi,BAI Ming-hui. Finite Element Analysis of Influence for Magnetic Particle Inspection Sensitivity by Yoke Placement[J]. Nondestructive Testing, 2014, 36(12): 73~75
刁海波,孙晓明,马晶晶,黄雪波,陈心一,白明辉. 磁轭放置方式对磁粉检测灵敏度影响的有限元分析[J]. 无损检测, 2014, 36(12): 73~75
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】宋智哲.磁粉检测[M].北京:中国劳动社会保障出版社, 2007.
【2】任吉林,林俊明.电磁无损检测[M].北京:科学出版社, 2009.
【3】BS 6072. Method for magnetic particle flaw detection[S].
【4】API RP 2X. Recommended Practice for Ultrasonic And Magnetic Examination of Offshore Structural Fabrication and Guideli nes for Qualification of Technicians[S].
【2】任吉林,林俊明.电磁无损检测[M].北京:科学出版社, 2009.
【3】BS 6072. Method for magnetic particle flaw detection[S].
【4】API RP 2X. Recommended Practice for Ultrasonic And Magnetic Examination of Offshore Structural Fabrication and Guideli nes for Qualification of Technicians[S].
相关信息