Effect of Forging Process on Nb-V Microalloyed Non-quenched and Tempered Steels
摘 要
在Gleeble-3800型热模拟试验机上对铌-钒微合金非调质钢进行热压缩试验,采用光学显微镜和扫描电镜研究了变形(锻造)工艺对试验钢显微组织的影响。结果表明:变形量为15%的低温(850 ℃)锻造能促进铌-钒非调质钢的组织细化,增加铁素体含量;减小冷却速率有利于先共析铁素体的生长,铌的加入使试验钢的再结晶终止温度提高,起到细化组织的作用,同时碳氮化物的析出促进了先共析铁素体的形成,使铌-钒微合金非调质钢的组织得到改善。
Abstract
Hot compression experiments were carried out for Nb-V microalloyed non-quenched and tempered steels on the Gleeble-3800 thermal simulation machine,and the effects of deformation (forging) process on the microstructure of test steels were studied by OM and SEM. The results show that low temperature (850 ℃) forging with deformation degree of 15% could facilitate the grain refining of Nb-V microalloyed non-quenched and tempered steels and increase the ferrite content. The cooling rate reducing was conducive to the growth of proeutectoid ferrite. The addition of Nb into the steel could improve the recrystallization temperature and refine the microstructure. Meanwhile,the precipitation of carbonitrides promoted the proeutectoid ferrite forming,which improved the toughness of Nb-V non-quenched and tempered steel.
中图分类号 TG142.1
所属栏目 试验研究
基金项目
收稿日期 2013/12/17
修改稿日期 2014/9/12
网络出版日期
作者单位点击查看
备注何沂桂(1988-),男,广西柳州人,硕士研究生。
引用该论文: HE Yi-gui,MAN Ting-hui,TAN Li,ZHAN Zhao-lin,YONG Qi-long,BAO Yao-zong. Effect of Forging Process on Nb-V Microalloyed Non-quenched and Tempered Steels[J]. Materials for mechancial engineering, 2015, 39(1): 29~31
何沂桂,满廷慧,谭利,詹肇麟,雍岐龙,包耀宗. 锻造工艺对铌-钒微合金非调质钢显微组织的影响[J]. 机械工程材料, 2015, 39(1): 29~31
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】常开地,王萍,刘卫萍.非调质钢的发展现状和应用进展[J].金属热处理,2011,36(3):80-85.
【2】马鸣图.微合金非调质钢的新发展及其在汽车工业中的应用[J].机械工程材料,2006,30(5):5-8.
【3】陈德华,王志明.非调质钢推广应用中强韧化工艺研究[J].金属热处理,2011,35(6):76-79.
【4】丁洁,张英建,陈蕴博.控锻控冷对非调质钢38MnVS5的组织影响[J].材料热处理学报,2006,27(5):35-38.
【5】董成瑞,任海鹏,金同哲. 微合金非调质钢[M].北京:冶金工业出版社,2000.
【6】阴数标,刘清友,张志波,等,热变形参数对含铌钢奥氏体未再结晶区变形相变的影响[J].钢铁,2008,43(2):81-85.
【7】贾志鑫,衣海龙,刘嵩韬,等.控轧控冷参数对含铌微合金钢组织的影响[J].机械工程材料,2006,30(9):7-9.
【8】何沂桂,詹肇麟,谭利,等.Nb对微合金非调质钢热加工过程中微观组织的影响[J].金属热处理,2013,38(6):30-33.
【9】LANZAGORTA J L,JORGE-BADIOLA D,GUTIRREZ I. Effect of the strain reversal on austenite-ferrite phase transformation in a Nb microalloyed steel[J]. Materials Science and Engineering:A,2010,527:934-940.
【10】黄光晖,曹念荪,章洪涛. Nb-V微合金中碳钢的显微组织与力学性能的关系[J].钢铁,1989,24(5):50-54.
【11】PICKERING F B,GARBARZ B. Strengthening in pearlite formed from thermo mechanically processed austenite in vanadium steels a nd implications for toughness[J].Mater Sci Technol,1989,5:227-237.
【12】臧尔寿,张厚君,王云阁.Nb和Nb-V共析钢的组织与析出相的研究[J].钢铁,1991,26(4):46-50.
【13】蔡爱国.铌钒微合金中碳钢的微观组织与强度的关系[J].钢铁研究学报,1996(2):35-39.
【2】马鸣图.微合金非调质钢的新发展及其在汽车工业中的应用[J].机械工程材料,2006,30(5):5-8.
【3】陈德华,王志明.非调质钢推广应用中强韧化工艺研究[J].金属热处理,2011,35(6):76-79.
【4】丁洁,张英建,陈蕴博.控锻控冷对非调质钢38MnVS5的组织影响[J].材料热处理学报,2006,27(5):35-38.
【5】董成瑞,任海鹏,金同哲. 微合金非调质钢[M].北京:冶金工业出版社,2000.
【6】阴数标,刘清友,张志波,等,热变形参数对含铌钢奥氏体未再结晶区变形相变的影响[J].钢铁,2008,43(2):81-85.
【7】贾志鑫,衣海龙,刘嵩韬,等.控轧控冷参数对含铌微合金钢组织的影响[J].机械工程材料,2006,30(9):7-9.
【8】何沂桂,詹肇麟,谭利,等.Nb对微合金非调质钢热加工过程中微观组织的影响[J].金属热处理,2013,38(6):30-33.
【9】LANZAGORTA J L,JORGE-BADIOLA D,GUTIRREZ I. Effect of the strain reversal on austenite-ferrite phase transformation in a Nb microalloyed steel[J]. Materials Science and Engineering:A,2010,527:934-940.
【10】黄光晖,曹念荪,章洪涛. Nb-V微合金中碳钢的显微组织与力学性能的关系[J].钢铁,1989,24(5):50-54.
【11】PICKERING F B,GARBARZ B. Strengthening in pearlite formed from thermo mechanically processed austenite in vanadium steels a nd implications for toughness[J].Mater Sci Technol,1989,5:227-237.
【12】臧尔寿,张厚君,王云阁.Nb和Nb-V共析钢的组织与析出相的研究[J].钢铁,1991,26(4):46-50.
【13】蔡爱国.铌钒微合金中碳钢的微观组织与强度的关系[J].钢铁研究学报,1996(2):35-39.
相关信息