Naphthenic Acid Corrosion Resistance of Typical Refining and Chemical Materials
摘 要
从材料热力学、冶金学角度概括分析了碳钢、Cr5Mo、304和316L奥氏体不锈钢、渗铝钢和Ni-P化学镀表面改性材料等典型炼油化工材料耐环烷酸腐蚀的机理, 以及介质酸值、流速、温度等因素对环烷酸腐蚀影响的动力学基础。
Abstract
The corrosion mechanisms of some typical refining and chemical materials, including carbon steel, Cr5Mo, 304 and 316L stainless steels, aluminized steel and Ni-P chemical plating surface modification materials and so on, in naphthenic acid environments are summarized by thermodynamical and metallurgical analyses. The kinetic analyses of the major factors affecting the naphthenic acid corrosion, including the acid value of oil, operation temperature, fluid velocity and flow pattern, are also discussed.
中图分类号 TG172.6 TG174.2
所属栏目 专论
基金项目
收稿日期 2010/5/13
修改稿日期 2010/5/25
网络出版日期
作者单位点击查看
联系人作者许述剑(xsjws1@163.com)
备注许述剑, 高级工程师,
引用该论文: XU Shu-jian,LIU Xiao-hui. Naphthenic Acid Corrosion Resistance of Typical Refining and Chemical Materials[J]. Corrosion & Protection, 2011, 32(3): 215
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Derungs W A. Naphthenic acid corrosion-an old enemy of the petroleum industry[J]. Corrosion, 1956(12):617-622.
【2】Tebbal S, Kane R D. Assessment of Crude Oil Corrosivity[C]//NACE International, Houston, 1998:578.
【3】Turnbull A, Slavcheva E, Shone B. Factors Controlling Naphthenic Acid Corrosion[J]. Corrosion, 1998, 54(11):922-930.
【4】Slavcheva E, Shone B, Tumbull A. Review of naphthenic acid corrosion in oil refining[J]. British Corrosion Journal, 1999, 34(2):125-131.
【5】Gutzeit J. Naphthenic Acid Corrosion in Oil Refineries[J]. Materials Performance, 1977, 16(10):24-35.
【6】李志勇, 陆琬珍. 辽河原油中羧酸分布及结构组成[J]. 石油学报, 1989, 5(4):62-65.
【7】Piehl R L. Naphthenic acid corrosion in crude distillation units[J]. Corrosion, 1987, 25(6):196-201.
【8】李志强. 炼油设备中的环烷酸腐蚀[J]. 腐蚀科学与防护技术, 1991, 3(4):1-9.
【9】Charles L K. New corrosion inhibitor for high temperature applications[J]. Oil & Gas, 1994(2):31-38.
【10】Lee H, Wood L K. Naphthenic acid corrosion in a refinery setting[J]. Corrosion, 1993, 33(9):631-640.
【11】Craig H L. Naphthenic acid corrosion in a refinery[J]. Corrosion, 1995, 33(3):12-20.
【12】Helle H P, Bonnette L. Guideline for corrosion control in crude distillers[M]. Holland:New plantation, 1993:21.
【13】敬和民, 郑玉贵, 姚治铭, 等. 环烷酸腐蚀及其控制[J]. 石油化工腐蚀与防护, 1999, 16(1):1-6.
【14】吴欣强, 敬和民, 郑玉贵, 等. 模拟工业炼油环境高温高流速状态的循环测试装置及其实验参数选择[J]. 中国腐蚀与防护学报, 2002, 22(1):1-7.
【15】吴欣强, 敬和民, 郑玉贵, 等. 超音速热喷涂316L合金涂层在实际炼油环境中的冲蚀行为[J]. 腐蚀科学与防护技术, 2002, 14(1):19-23.
【16】Wu X Q, Jing H M, Zheng Y G, et al. Corrosion and erosion-corrosion behaviors of carbon steelin naphthenic acid mediums[J]. Wear, 2004, 256:133-144.
【17】高延敏, 陈家坚, 余刚, 等. 环烷酸对A3钢腐蚀机理的研究[J]. 腐蚀科学与防护技术, 2000, 12(1):27-29.
【18】吕振波, 赵杉林, 庄丽宏, 等. 环烷酸腐蚀与缓蚀技术[J]. 四川化工与腐蚀控制, 2003, 6(5):41-45.
【19】Georgina C L, Carla R L, Regina E A, et al. Naphthenic acids total acid number and sulfur content profile characterization in Isthmus and Maya crude oils[J]. Fuel, 2004, 83:1689-1695.
【20】Qu D R, Zheng Y G, Jing H M, et al. High temperature naphthenic acid corrosion and sulphidic corrosion of Q235 and 5Cr1/2Mo steels in synthetic refining media[J]. Corrosion Science, 2006, 48:1960-1985.
【21】张雷, 赵杉林, 田松柏. 高温环烷酸腐蚀行为及腐蚀测试方法的研究进展[J]. 山东化工, 2006, 35(4):13-16.
【22】吴欣强, 敬和民, 郑玉贵, 等. 碳钢在高温环烷酸介质中冲刷腐蚀行为[J]. 中国腐蚀与防护学报, 2002, 22(5):257-263.
【23】敬和民, 龙康, 阎永贵, 等. 高温高流速冲蚀实验装置研制及Cr5Mo在环烷酸中的冲蚀研究[J]. 石油化工腐蚀与防护, 1999, 16(3):38-42.
【24】敬和民, 郑玉贵, 姚冶铭, 等. Cr5Mo在含环烷酸油中的高温冲蚀研究[C]//99中国国际腐蚀控制大会, 北京, 1999:78-81.
【25】余建飞, 甘复兴, 詹约章. 不锈钢在高温环烷酸中的腐蚀行为研究[J]. 材料保护, 2008, 41(10):216-219.
【26】董晓焕, 姜毅, 赵国仙. 四种常用钢材耐环烷酸腐蚀性能研究[J]. 石油化工腐蚀与防护, 2004, 21(2):1-4.
【27】吴欣强, 敬和民, 郑玉贵, 等. 渗Al碳钢在高温精制环烷酸介质中的腐蚀行为[J]. 腐蚀科学与防护技术, 2002, 14 (1):1-6.
【28】陈志量, 张业明, 郝龙, 等. 化学镀Ni-P合金抗环烷酸腐蚀性能研究[C]//2007年中国机械工程学会年会, 长沙, 2007:741-745.
【29】敬和民, 吴欣强, 郑玉贵, 等. Mo含量对不锈钢在环烷酸介质中腐蚀与冲蚀的影响[J]. 金属学报, 2002, 38(10):1067-1073.
【2】Tebbal S, Kane R D. Assessment of Crude Oil Corrosivity[C]//NACE International, Houston, 1998:578.
【3】Turnbull A, Slavcheva E, Shone B. Factors Controlling Naphthenic Acid Corrosion[J]. Corrosion, 1998, 54(11):922-930.
【4】Slavcheva E, Shone B, Tumbull A. Review of naphthenic acid corrosion in oil refining[J]. British Corrosion Journal, 1999, 34(2):125-131.
【5】Gutzeit J. Naphthenic Acid Corrosion in Oil Refineries[J]. Materials Performance, 1977, 16(10):24-35.
【6】李志勇, 陆琬珍. 辽河原油中羧酸分布及结构组成[J]. 石油学报, 1989, 5(4):62-65.
【7】Piehl R L. Naphthenic acid corrosion in crude distillation units[J]. Corrosion, 1987, 25(6):196-201.
【8】李志强. 炼油设备中的环烷酸腐蚀[J]. 腐蚀科学与防护技术, 1991, 3(4):1-9.
【9】Charles L K. New corrosion inhibitor for high temperature applications[J]. Oil & Gas, 1994(2):31-38.
【10】Lee H, Wood L K. Naphthenic acid corrosion in a refinery setting[J]. Corrosion, 1993, 33(9):631-640.
【11】Craig H L. Naphthenic acid corrosion in a refinery[J]. Corrosion, 1995, 33(3):12-20.
【12】Helle H P, Bonnette L. Guideline for corrosion control in crude distillers[M]. Holland:New plantation, 1993:21.
【13】敬和民, 郑玉贵, 姚治铭, 等. 环烷酸腐蚀及其控制[J]. 石油化工腐蚀与防护, 1999, 16(1):1-6.
【14】吴欣强, 敬和民, 郑玉贵, 等. 模拟工业炼油环境高温高流速状态的循环测试装置及其实验参数选择[J]. 中国腐蚀与防护学报, 2002, 22(1):1-7.
【15】吴欣强, 敬和民, 郑玉贵, 等. 超音速热喷涂316L合金涂层在实际炼油环境中的冲蚀行为[J]. 腐蚀科学与防护技术, 2002, 14(1):19-23.
【16】Wu X Q, Jing H M, Zheng Y G, et al. Corrosion and erosion-corrosion behaviors of carbon steelin naphthenic acid mediums[J]. Wear, 2004, 256:133-144.
【17】高延敏, 陈家坚, 余刚, 等. 环烷酸对A3钢腐蚀机理的研究[J]. 腐蚀科学与防护技术, 2000, 12(1):27-29.
【18】吕振波, 赵杉林, 庄丽宏, 等. 环烷酸腐蚀与缓蚀技术[J]. 四川化工与腐蚀控制, 2003, 6(5):41-45.
【19】Georgina C L, Carla R L, Regina E A, et al. Naphthenic acids total acid number and sulfur content profile characterization in Isthmus and Maya crude oils[J]. Fuel, 2004, 83:1689-1695.
【20】Qu D R, Zheng Y G, Jing H M, et al. High temperature naphthenic acid corrosion and sulphidic corrosion of Q235 and 5Cr1/2Mo steels in synthetic refining media[J]. Corrosion Science, 2006, 48:1960-1985.
【21】张雷, 赵杉林, 田松柏. 高温环烷酸腐蚀行为及腐蚀测试方法的研究进展[J]. 山东化工, 2006, 35(4):13-16.
【22】吴欣强, 敬和民, 郑玉贵, 等. 碳钢在高温环烷酸介质中冲刷腐蚀行为[J]. 中国腐蚀与防护学报, 2002, 22(5):257-263.
【23】敬和民, 龙康, 阎永贵, 等. 高温高流速冲蚀实验装置研制及Cr5Mo在环烷酸中的冲蚀研究[J]. 石油化工腐蚀与防护, 1999, 16(3):38-42.
【24】敬和民, 郑玉贵, 姚冶铭, 等. Cr5Mo在含环烷酸油中的高温冲蚀研究[C]//99中国国际腐蚀控制大会, 北京, 1999:78-81.
【25】余建飞, 甘复兴, 詹约章. 不锈钢在高温环烷酸中的腐蚀行为研究[J]. 材料保护, 2008, 41(10):216-219.
【26】董晓焕, 姜毅, 赵国仙. 四种常用钢材耐环烷酸腐蚀性能研究[J]. 石油化工腐蚀与防护, 2004, 21(2):1-4.
【27】吴欣强, 敬和民, 郑玉贵, 等. 渗Al碳钢在高温精制环烷酸介质中的腐蚀行为[J]. 腐蚀科学与防护技术, 2002, 14 (1):1-6.
【28】陈志量, 张业明, 郝龙, 等. 化学镀Ni-P合金抗环烷酸腐蚀性能研究[C]//2007年中国机械工程学会年会, 长沙, 2007:741-745.
【29】敬和民, 吴欣强, 郑玉贵, 等. Mo含量对不锈钢在环烷酸介质中腐蚀与冲蚀的影响[J]. 金属学报, 2002, 38(10):1067-1073.
相关信息