Effect of Welding on Corrosion Resistance of 00Cr22Ni5Mo3N Tube and Process Optimization
摘 要
对00Cr22Ni5Mo3N双相不锈钢筒体主焊缝焊接后耐蚀性能下降的原因进行了分析;通过焊接试验研究, 总结出该材料焊接的优化工艺及专项技术措施, 为现场顺利制造设备及提高一次性返修合格率积累了经验, 对类似材质结构装备的焊接亦有积极的指导作用。
Abstract
00Cr22Ni5Mo3N is a kind of duplex stainless steel produced in China and is used in chemical equipment manufacturing more and more. Based on the analysis of the reasons for the decrease of corrosion resistance of tube′s main seam after welding, an optimized welding process of the material was summarized and developed, which was useful to increase the productivity and repair rate in manufacturing stainless steel equipment. The optimized welding process also provides positive effect in welding of similar materials.
中图分类号 TG174
所属栏目 应用技术
基金项目
收稿日期
修改稿日期
网络出版日期
作者单位点击查看
引用该论文: REN Li-jing,ZHANG Zhi-xun,LV Jing,RUAN Xin,WANG Cheng-jun. Effect of Welding on Corrosion Resistance of 00Cr22Ni5Mo3N Tube and Process Optimization[J]. Corrosion & Protection, 2011, 32(7): 558
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】邹增大. 焊接材料、工艺及设备手册[M]. 北京: 化学工业出版社, 2001.
【2】阮鑫, 张利锋, 孔庆月, 等. 化工用不锈钢管件-管子焊接中的晶间腐蚀与防范措施[J]. 腐蚀科学与防护技术, 2007, 19(1): 77-78.
【3】曾乐. 现代焊接技术手册[M]. 上海: 上海科学技术出版社, 1993.
【4】吴玖, 魏振宇, 韩俊媛, 等. 双相不锈钢[M]. 北京: 冶金工业出版社, 1996.
【5】王宽福. 压力容器焊接结构工程分析[M]. 北京: 化学工业出版社, 1998.
【6】任家烈. 先进材料的连接[M]. 北京: 机械工业出版社, 2000.
【7】周振丰, 张文锁. 焊接冶金与金属焊接性[M]. 北京: 机械工业出版社, 2001.
【8】王晓敏. 工程材料学[M]. 哈尔滨: 哈尔滨工业大学出版社, 1998.
【2】阮鑫, 张利锋, 孔庆月, 等. 化工用不锈钢管件-管子焊接中的晶间腐蚀与防范措施[J]. 腐蚀科学与防护技术, 2007, 19(1): 77-78.
【3】曾乐. 现代焊接技术手册[M]. 上海: 上海科学技术出版社, 1993.
【4】吴玖, 魏振宇, 韩俊媛, 等. 双相不锈钢[M]. 北京: 冶金工业出版社, 1996.
【5】王宽福. 压力容器焊接结构工程分析[M]. 北京: 化学工业出版社, 1998.
【6】任家烈. 先进材料的连接[M]. 北京: 机械工业出版社, 2000.
【7】周振丰, 张文锁. 焊接冶金与金属焊接性[M]. 北京: 机械工业出版社, 2001.
【8】王晓敏. 工程材料学[M]. 哈尔滨: 哈尔滨工业大学出版社, 1998.
相关信息