Materials Selection and Application of High Performance Stainless Steels Used in Sour Oil and Gas Fields
摘 要
分析了酸性油气田选材标准及体系, 重点综述了酸性油气工业用高性能不锈钢的选材特点、评价方法标准和用材现状, 还对常用材料性价比进行了简单分析。
Abstract
The selection standards and system of metallic materials used in sour oil and gas industries are analyzed, and the emphasis is focused on metallic materials selection characteristics, evaluation standards, utilized status of high performance stainless steels for sour oil and gas fields. In addition, the cost of material selection is analyzed briefly.
中图分类号 TG174.22 TG133.4
所属栏目 专论
基金项目 重庆市科技攻关计划(CSTC2009AB4082; CSTC2010AA4054)项目; 中国机械工业集团有限公司科技发展基金(SINOMACH09科242号)项目
收稿日期 2010/11/23
修改稿日期 2011/1/13
网络出版日期
作者单位点击查看
备注刘海定, 工程师,
引用该论文: LIU Hai-ding,WANG Dong-zhe,WEI Han-dong,ZHANG Yu-bi,DUAN Min-jiang,CHEN Deng-hua. Materials Selection and Application of High Performance Stainless Steels Used in Sour Oil and Gas Fields[J]. Corrosion & Protection, 2011, 32(10): 817
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】魏星, 郭建春, 赵金洲, 等. 中国油气资源现状及发展建议[J]. 中外能源, 2008, 13(5):17-22.
【2】韩大匡. 中国油气田开发现状、面临的挑战和技术发展方向[J]. 中国工程科学, 2010, 12(5):51-57.
【3】岑芳, 李治平, 赖枫鹏, 等. 高含硫气田开发难点及对策[J]. 现代地质, 2007, 21(增刊):63-65.
【4】王正东. 各国由酸性气体生产硫磺产量概况和酸性气田开采中的一些问题[J]. 石油与天然气化工, 1980(4):38-48.
【5】张忠铧, 张春霞, 陈长风. 高温高压H2S腐蚀试验方法的国际标准分析[J]. 世界钢铁, 2007(4):17-21.
【6】葛有琰, 杜强. 含硫化氢环境油气田开发材质选择标准方法——NACE MR 0175/IS0 15156的应用概要[J]. 石油与天然气化工, 2008, 37(5):410-415.
【7】NACE MR0175/ISO 15156-2:2003(E). Petroleum and natural gas industries-materials for use in H2S-containing environments in oil and gas production-Part 2:Cracking-resistant carbon and low alloy steels, and the use of cast irons[S].
【8】M B Kermani, D Harrop. Experimental limit of Sour Service for Tubular Steels[C]//NACE Corrosion/91, Houston:11-15.
【9】Kovach C W, Redmerski L S. Corrosion resistance of high-performance stainless in cooling water and other refinery environments[C]//NACE Corrosion/84, New Orleans:2-6.
【10】Arnvig P E, Wasielewska W. Stress corrosion behaviour of highly alloyed stainless steels under severe evaporative conditions[J]. ACOM(Avesta Sheffield AB), 1993(3).
【11】NACE MR0175/ISO 15156-3:2003(E). Petroleum and natural gas industries-materials for use in H2S-containing environments in oil and gas production-Part 3:Cracking-resistant CRAs (corrosion resistant alloys) and other alloys[S].
【12】Bauernfeind D, Mori G. Corrosion of superaustenitic stainless steels in chloride-and sulfate-containing media-influence of alloying elements Cr, Mo, N, and Cu[C]//NACE Corrosion/2003, Houston:16-20.
【13】Nicole Kinsman, Gary Carinci, Jim Feritz. 双相不锈钢新钢种、应用和标准概述[C]//第三届中国国际双相不锈钢大会, 山西太原:2009.
【14】Bahri Ozturk, John F Grubb. Review of N08367 seawater service experience[C]//NACE Corrosion/2005, Houston:18-20.
【2】韩大匡. 中国油气田开发现状、面临的挑战和技术发展方向[J]. 中国工程科学, 2010, 12(5):51-57.
【3】岑芳, 李治平, 赖枫鹏, 等. 高含硫气田开发难点及对策[J]. 现代地质, 2007, 21(增刊):63-65.
【4】王正东. 各国由酸性气体生产硫磺产量概况和酸性气田开采中的一些问题[J]. 石油与天然气化工, 1980(4):38-48.
【5】张忠铧, 张春霞, 陈长风. 高温高压H2S腐蚀试验方法的国际标准分析[J]. 世界钢铁, 2007(4):17-21.
【6】葛有琰, 杜强. 含硫化氢环境油气田开发材质选择标准方法——NACE MR 0175/IS0 15156的应用概要[J]. 石油与天然气化工, 2008, 37(5):410-415.
【7】NACE MR0175/ISO 15156-2:2003(E). Petroleum and natural gas industries-materials for use in H2S-containing environments in oil and gas production-Part 2:Cracking-resistant carbon and low alloy steels, and the use of cast irons[S].
【8】M B Kermani, D Harrop. Experimental limit of Sour Service for Tubular Steels[C]//NACE Corrosion/91, Houston:11-15.
【9】Kovach C W, Redmerski L S. Corrosion resistance of high-performance stainless in cooling water and other refinery environments[C]//NACE Corrosion/84, New Orleans:2-6.
【10】Arnvig P E, Wasielewska W. Stress corrosion behaviour of highly alloyed stainless steels under severe evaporative conditions[J]. ACOM(Avesta Sheffield AB), 1993(3).
【11】NACE MR0175/ISO 15156-3:2003(E). Petroleum and natural gas industries-materials for use in H2S-containing environments in oil and gas production-Part 3:Cracking-resistant CRAs (corrosion resistant alloys) and other alloys[S].
【12】Bauernfeind D, Mori G. Corrosion of superaustenitic stainless steels in chloride-and sulfate-containing media-influence of alloying elements Cr, Mo, N, and Cu[C]//NACE Corrosion/2003, Houston:16-20.
【13】Nicole Kinsman, Gary Carinci, Jim Feritz. 双相不锈钢新钢种、应用和标准概述[C]//第三届中国国际双相不锈钢大会, 山西太原:2009.
【14】Bahri Ozturk, John F Grubb. Review of N08367 seawater service experience[C]//NACE Corrosion/2005, Houston:18-20.
相关信息