搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
铝合金阳极氧化膜电解着色工艺概况
          
Latest Electrolytic Coloring Techniques of Anodic Coating on Aluminum Alloys

摘    要
介绍了几种传统的阳极氧化电解着色技术原理及典型工艺, 在此基础上归纳了传统电解着色的技术特点并介绍了该领域的最新研究动向, 并详细介绍了最新研究方向之一“多彩电解着色”的工艺原理和主要方法。最后, 预测电解着色技术在未来相当长的时间内仍然是铝合金着色的主要工艺技术, 同时也指明了多彩着色技术在未来是一个重要的发展方向。
标    签 铝合金   阳极氧化   电解着色   aluminium alloy   anodizing   electrolytic coloring  
 
Abstract
Several technical principles and typical electrolytic coloring processes for traditional anodizing are described, and the technical characteristics of traditional electrolytic coloring are summarized. The latest research trends in this field are introduced. As is one of the latest electrolytic coloring research trends the technological principle and main methods of multi-coloring technique are described in detail. It is predicted that the electrolytic coloring techniques will still be the main coloring technology for aluminum alloys for a long time, and it is pointed out that the multi-coloring technology has a bright development prospects.

中图分类号 TG178

 
  中国光学期刊网论文下载说明


所属栏目 专论

基金项目 广东省科技计划项目(No.2006B14201002); 佛山市院市合作项目(No.2011A02)

收稿日期 2012/3/9

修改稿日期

网络出版日期

作者单位点击查看


备注陈东初, 教授, 博士,

引用该论文: GONG Xun-fei,CHEN Dong-chu,PAN Xue-zhu,WU Kai-feng,YE Shu-lin. Latest Electrolytic Coloring Techniques of Anodic Coating on Aluminum Alloys[J]. Corrosion & Protection, 2012, 33(5): 362


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】裴玉汝, 梅天庆, 鱼光楠, 等. 铝镀层阳极氧化膜的制备[J]. 腐蚀与防护, 2011, 32(11):884-887.
 
【2】王海潮, 彭乔. 电化学法研究铝阳极氧化膜的抗腐蚀性[J]. 腐蚀与防护, 2006(08).
 
【3】Runge J M, Pomis A. Anodie Oxide Finishes:Relating Engineering PerformanceTo Microstructure and Hardness[J]. Plating and Surface Finishing, 2003(06):60-65.
 
【4】Sheasby Peter G, Cheetham Graham, Stuckart Rainer W M. Aluminium articles having anodic oxide coatings and methods of coloring them by means of optical interference effects:US 4310586[P]. 1982-01-12.
 
【5】Sheasby Peter G, Short Edward P, Gupta Tarun K S. Electrolytic coloring of anodized aluminium by means of optical interference effects:US, 4251330[P]. 1981-02-17.
 
【6】Sheasby P G, Short E P. Interference coloring of anodized aluminum[J]. Trans Inst Met Finish, 1985, 63(05):47.
 
【7】Bellei S, Strazzi E. Multicolouring process:New durable colours for the anodising industry[C]//4th World Congress Aluminium 2000.2000.
 
【8】刘文亮, 朱祖芳. 铝及铝合金电解着色机理[J]. 电镀与环保, 1995, 15(06):17-19.
 
【9】朱祖芳. 铝合金阳极氧化与表面处理技术[M]. 北京:化学工业出版社, 2004:169.
 
【10】朱祖芳. 铝合金阳极氧化工艺技术应用手册[M]. 北京:化学工业出版社, 2007:42.
 
【11】梁坤, 梁成浩, 王华, 等. 铝及其合金着色技术的研究进展[J]. 电镀与涂饰, 2005, 24(5):28-31.
 
【12】朱祖芳. 铝阳极氧化膜多色彩电解着色工艺[J]. 电镀与涂饰, 2006, 25(06):42-45.
 
【13】Sheasby P G, Short E P. Interference coloring of anodized aluminum[J]. Trans Inst Met Finish, 1985, 63(05):47-50.
 
【14】Wood J L. Innovations in architectural anodizing and multicolouring of Aluminium[J]. Trans Inst Met Finish, 1991, 68(03):59-63.
 
【15】Kawai S, Yamamuro M. Interference coloring of dual-anodized film on aluminum containing electrolytically deposited thin metal layers[J]. Plating and Surface Finishing, 1997, 84(05):116-121.
 
【16】Strazzi E. Conventional and advanced electrocolouring techniques[C]//AluSurface 98.1998.
 
【17】Masoud A A. Bayoumi M M.Robot navigation using the vector potential approach[C]//Proc.of the IEEE International Conference on Robotics and Automation.1993.
 
相关信息
   标题 相关频次
 铝合金多色化电解着色溶液配方与极板材料的优化
 13
 前处理对6063铝合金材料表面微观特性及耐丝状腐蚀性能的影响
 7
 带喷涂层的6063铝合金型材丝状腐蚀性能的电化学研究
 6
 铝合金表面钴盐法制备钴-锰复合转化膜
 4
 6063铝合金阳极氧化过程中麻点问题分析
 3
 9S75铝合金的电化学腐蚀行为及阳极氧化工艺
 3
 2219铝合金热压缩时的流变应力本构方程
 2
 6061铝合金上硅烷膜的制备与性能
 2
 7050铝合金的表面增压喷丸纳米化
 2
 A356铝合金车轮T6热处理工艺的优化
 2
 AZ31镁合金的阳极氧化新工艺
 2
 LY12M铝合金板同步冷却热拉伸后的组织与性能
 2
 PTFE/7075铝合金镶嵌型自润滑材料的摩擦学行为
 2
 表面粗糙度对硝酸钝化304不锈钢点蚀行为影响
 2
 表面状态对铝合金铸件荧光渗透检测的影响
 2
 不同铝合金在硫酸液中硬质阳极氧化工艺的研究
 2
 电磁连铸Al-1%Si棒材的组织和力学性能
 2
 电解液成分对铝合金磷酸阳极氧化膜性能的影响
 2
 电解液中Na2CO3/C6H12O6对AZ31镁合金阳极氧化膜结构与耐腐蚀性能的影响
 2
 二溴对甲基偶氮磺褪色光度法测定铝合金中微量铬
 2
 腐蚀产物对6061铝合金海洋大气腐蚀过程的影响
 2
 高浓度氯离子溶液中Y112铝合金缓蚀剂的电化学研究
 2
 缓蚀剂对LY12铝合金搭接件疲劳寿命的影响
 2
 基于蒙特卡洛法的铝合金抗拉强度测量不确定度评定
 2
 进口铸铝合金件阳极氧化膜的分析
 2
 开尔文探针技术检测不同表面粗糙度不锈钢早期点蚀敏感性
 2
 利用iTEM软件测定铝合金晶粒级别指数
 2
 铝合金表面处理6大工艺,这里是最全的!
 2
 铝合金表面微弧氧化陶瓷层的耐腐蚀性能
 2
 铝合金表面自修复防护膜的研究进展
 2