油田用玻璃钢管道的使用和评价现状
Research Progress of FRP Pipes in Oil Fields
摘 要
玻璃钢管作为一种性能优良的新兴产品, 在一些油田环境中得到较好的应用。但目前玻璃钢材料在油田环境中的老化机理还不清楚, 缺乏系统的试验数据。本文介绍了油田用玻璃钢管的使用概况, 综述了其失效形式、性能评价方法及寿命预测方法。
管道
失效形式
性能评价方法
寿命预测
FRP
pipe
failure mode
performance evaluation
life prediction
Abstract
The FRP pipe, as an excellent new product, is well applied in the oil field. But its aging mechanism in the oil field environment is unclear and we don’t have enough systemic test data about it. This article introduces the application of FRP pipe in oil field and reviews its failure modes, performance evaluation and life prediction methods, so as to provide suggestions to actual production and application in the oil fields and help to maximize the potential economic and social benefits.
中图分类号 TE973
所属栏目 专论
基金项目
收稿日期 2011/9/14
修改稿日期
网络出版日期
作者单位点击查看
备注许立宁, 讲师,
引用该论文: MENG Yao,XU Li-ning,LU Min-xu. Research Progress of FRP Pipes in Oil Fields[J]. Corrosion & Protection, 2012, 33(8): 664
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王禹阶, 崔鹏. 玻璃钢与复合材料的生产及应用[M]. 合肥: 合肥工业大学出版社, 2005.
【2】龙冬梅, 王广鹏. 浅谈市政给水管材的选用[J]. 黑龙江科技信息, 2011(8): 52.
【3】李慧峰, 王加雄. 大型玻璃钢储罐的特点及应用[J]. 油气田地面工程, 2008, 27(6): 92-95.
【4】马来增, 谢先华. 抽油机井应用玻璃钢管采油技术研究[J]. 石油天然气学报, 2010, 32(3): 369-372.
【5】刘洋, 董事尔, 刘倩, 等. 玻璃钢管的应用现状及展望[J]. 油气田地面工程, 2011, 30(4): 98-99.
【6】蔡永春, 裴兵. 玻璃钢管线在吐哈温米油田的应用[J]. 油气田地面工程, 2009, 28(4):77-79.
【7】Tarakcioglu N, Samanci A, Arikan H, et al. The fatigue behavior of (±55°)3 filament wound GRP pipes with a surface crack under internal pressure[J]. Composite Structures, 2007(80): 207-211.
【8】Arikan H. Failure analysis of (±55°)3 filament wound composite pipes with an inclined surface crack under static internal pressure[J]. Composite Structures, 2010(92): 182-187.
【9】Cowley T W. Repair of a 50 foot diameter FRP hydrochloric acid storage tank[C]//Corrosion 2010, Paper No.10041.
【10】Estrada H, Parsons I D. Strength and leakage finite element analysis of a GFRP flange joint[J]. Pressure Vessels and Piping, 1999(76): 543-550.
【11】ASTM D1599-99. Standard test method for resistance to short-time heydraulic pressure of plastic pipe, tubing and fittings[S]. 2005.
【12】ASTM D618-08. Standard practice for conditioning plastics for testing[S]. 2008.
【13】API Spec 15HR 2001. Specification for high pressure fiberglass line pipe[S]. 2001.
【14】ASTM D2992-06. Standard practice for obtaining hydrostatic or pressure design basis for “fiberglass” (Glass-Fiber-Reinforced thermosetting-resin)pipe and fittings[S]. 2006.
【15】NACE TM0298-2003. Evaluating the compatibility of FRP pipe and tubulars with oilfield environments[S]. 2003.
【16】ASTM D2990-04. Standard test method for apparent hoop tensile strength of plastic or reinforced plastic pipe by split disk method[S]. 2004.
【17】Guedes R M, Sa A, Faria H. Influence of moisture absorption on creep of GRP composite pipes[J]. Polymer Testing, 2001(26): 595-605.
【18】施岱艳, 刘倩, 廖德君. 玻璃钢管耐硫化氢腐蚀性能研究[C]//NACE中国分会2006年技术年会. 成都:2006.
【19】Spoo K J. Corrosion resistance of various glass fiber reinforcements[C]//Corrosion 2009, Paper No.09327.
【20】FARIA H, GUEDES R M. Long-term behaviour of GFRP pipes:reducing the predictiontest duration[J]. Polymer Testing, 2010, 29:337-345.
【2】龙冬梅, 王广鹏. 浅谈市政给水管材的选用[J]. 黑龙江科技信息, 2011(8): 52.
【3】李慧峰, 王加雄. 大型玻璃钢储罐的特点及应用[J]. 油气田地面工程, 2008, 27(6): 92-95.
【4】马来增, 谢先华. 抽油机井应用玻璃钢管采油技术研究[J]. 石油天然气学报, 2010, 32(3): 369-372.
【5】刘洋, 董事尔, 刘倩, 等. 玻璃钢管的应用现状及展望[J]. 油气田地面工程, 2011, 30(4): 98-99.
【6】蔡永春, 裴兵. 玻璃钢管线在吐哈温米油田的应用[J]. 油气田地面工程, 2009, 28(4):77-79.
【7】Tarakcioglu N, Samanci A, Arikan H, et al. The fatigue behavior of (±55°)3 filament wound GRP pipes with a surface crack under internal pressure[J]. Composite Structures, 2007(80): 207-211.
【8】Arikan H. Failure analysis of (±55°)3 filament wound composite pipes with an inclined surface crack under static internal pressure[J]. Composite Structures, 2010(92): 182-187.
【9】Cowley T W. Repair of a 50 foot diameter FRP hydrochloric acid storage tank[C]//Corrosion 2010, Paper No.10041.
【10】Estrada H, Parsons I D. Strength and leakage finite element analysis of a GFRP flange joint[J]. Pressure Vessels and Piping, 1999(76): 543-550.
【11】ASTM D1599-99. Standard test method for resistance to short-time heydraulic pressure of plastic pipe, tubing and fittings[S]. 2005.
【12】ASTM D618-08. Standard practice for conditioning plastics for testing[S]. 2008.
【13】API Spec 15HR 2001. Specification for high pressure fiberglass line pipe[S]. 2001.
【14】ASTM D2992-06. Standard practice for obtaining hydrostatic or pressure design basis for “fiberglass” (Glass-Fiber-Reinforced thermosetting-resin)pipe and fittings[S]. 2006.
【15】NACE TM0298-2003. Evaluating the compatibility of FRP pipe and tubulars with oilfield environments[S]. 2003.
【16】ASTM D2990-04. Standard test method for apparent hoop tensile strength of plastic or reinforced plastic pipe by split disk method[S]. 2004.
【17】Guedes R M, Sa A, Faria H. Influence of moisture absorption on creep of GRP composite pipes[J]. Polymer Testing, 2001(26): 595-605.
【18】施岱艳, 刘倩, 廖德君. 玻璃钢管耐硫化氢腐蚀性能研究[C]//NACE中国分会2006年技术年会. 成都:2006.
【19】Spoo K J. Corrosion resistance of various glass fiber reinforcements[C]//Corrosion 2009, Paper No.09327.
【20】FARIA H, GUEDES R M. Long-term behaviour of GFRP pipes:reducing the predictiontest duration[J]. Polymer Testing, 2010, 29:337-345.
相关信息
