Critical Pitting Temperature of Super 13Cr Stainless Steel
摘 要
采用电化学测试和化学浸泡两种方法, 研究了超级13Cr不锈钢的临界点蚀温度, 并对其点蚀形貌进行了分析。结果表明, 电化学和化学浸泡法测定的超级13Cr钢的临界点蚀温度相差了4 ℃, 主要原因是FeCl3强烈的氧化作用促进了点蚀的发生。化学浸泡法主要适用对比评价几种材料的耐点蚀性能, 电化学测试则可准确描述点蚀形成的临界条件。当温度低于临界点蚀温度(CPT)时, 材料表面形成孔径小于30 μm的点蚀坑, 蚀坑处于亚稳态; 当温度高于CPT时, 为点蚀的发展提供了条件, 形成稳定的点蚀。
Abstract
The pitting corrosion behavior of super 13Cr stainless steel was studied by electrochemical test and chemical immersion methods, and the pitting morphology was observed by SEM. The results show that there was a difference of 4 ℃ in the critical pitting temperatures of the super 13Cr stainless steel determined by electrochemical and chemical immersion methods. This is due to the promotion function of strong oxidation of FeCl3 in chemical immersion. Chemical immersion appraisal is mainly suitable for comparison of the pitting performance of several materials, whereas the electrochemical test can further describe the critical condition of pitting. Meta-stable pitting with a diameter less than 30 μm was formed on material surface just below the CPT, while stable pits could only be formed above the CPT.
中图分类号 TG174.3
所属栏目 试验研究
基金项目
收稿日期 2011/10/6
修改稿日期
网络出版日期
作者单位点击查看
备注张国超,硕士研究生,
引用该论文: ZHANG Guo-chao,LIN Guan-fa,LEI Dan,ZHANG Juan-tao. Critical Pitting Temperature of Super 13Cr Stainless Steel[J]. Corrosion & Protection, 2012, 33(9): 777
被引情况:
【1】金志浩,葛红花,林薇薇,孟新静,赵玉增, "四种不锈钢在含不同浓度Cl-的高炉煤气管道冷凝模拟液中的腐蚀行为",腐蚀与防护 35, 890-894(2014)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】吴剑. 不锈钢的腐蚀破坏与防护技术(一)点腐蚀的形成条件、形貌特征及其预防[J]. 腐蚀与防护,1999,18(1):38-41.
【2】马力,阎永贵,李小亚. 时效处理对CrCoMo不锈钢耐蚀性能的影响[J]. 腐蚀与防护,2004,25(9):376-381.
【3】魏宝明. 金属腐蚀理论及应用[M]. 北京: 化学工业出版社, 2004.
【4】张德康. 不锈钢局部腐蚀[M]. 北京: 科学出版社, 1982.
【5】吴玮巍,蒋益明,廖家兴,等. 0Cr25Ni7Mo4、316与304不锈钢临界点蚀温度研究[J]. 腐蚀科学与防护技术,2006,18(4):285-288.
【6】韩燕,赵雪会,白真权,等. 不同温度下超级13Cr在Cl-/CO2环境中的腐蚀行为[J]. 腐蚀与防护,2011,32(5):366-369.
【2】马力,阎永贵,李小亚. 时效处理对CrCoMo不锈钢耐蚀性能的影响[J]. 腐蚀与防护,2004,25(9):376-381.
【3】魏宝明. 金属腐蚀理论及应用[M]. 北京: 化学工业出版社, 2004.
【4】张德康. 不锈钢局部腐蚀[M]. 北京: 科学出版社, 1982.
【5】吴玮巍,蒋益明,廖家兴,等. 0Cr25Ni7Mo4、316与304不锈钢临界点蚀温度研究[J]. 腐蚀科学与防护技术,2006,18(4):285-288.
【6】韩燕,赵雪会,白真权,等. 不同温度下超级13Cr在Cl-/CO2环境中的腐蚀行为[J]. 腐蚀与防护,2011,32(5):366-369.
相关信息