Cathodic Protection Technology for Mud Circulation System Equipment
摘 要
针对江汉油田泥浆循环系统设备, 设计了牺牲阳极阴极保护防腐蚀方案。对无机盐水的电阻率进行筛选, 选择铝阳极, 并对铝阳极的规格、形状、安装位置、使用寿命、检测技术等进行了设计, 阳极安装采用直接焊接或螺栓固定。该技术已实现现场应用。结果表明, 被保护试片平均腐蚀速率小于0.2 mm/a, 保护率在80%左右, 能够满足防腐蚀要求。
Abstract
A sacrificial anode cathodic protection technology was desigred for the mud circulation system equipment in Jianghan oilfield. According to the resistance rate of salt water, aluminium anode was chosen as the feasible anode, and its specification, shape, installation position, service life and detecting techniques were investigated. By direct jointing or bolt fixation, field construction can be achieved. The results showed the average corrosion rate of the protected piece was less than 0.2 mm/a and the protection efficiency was about 80%, which can meet the needs of corrosion prevention.
中图分类号 TG174.41
所属栏目 应用技术
基金项目
收稿日期 2011/12/8
修改稿日期
网络出版日期
作者单位点击查看
备注梁文利, 工程师, 硕士,
引用该论文: LIANG Wen-li. Cathodic Protection Technology for Mud Circulation System Equipment[J]. Corrosion & Protection, 2012, 33(11): 1022
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】郑家燊. 金属电化学和缓蚀剂保护技术[M]. 上海:上海科学技术出版社, 1984: 98-105.
【2】黄永昌. 金属腐蚀与防护原理[M]. 上海:上海交通大学出版社, 1989:136-147.
【3】胡士信. 阴极保护工程手册[M]. 北京:化学工业出版社, 1999: 9-12, 73-80.
【2】黄永昌. 金属腐蚀与防护原理[M]. 上海:上海交通大学出版社, 1989:136-147.
【3】胡士信. 阴极保护工程手册[M]. 北京:化学工业出版社, 1999: 9-12, 73-80.
相关信息