Corrosion of Stainless Steels in Artificial Saliva with Different Fluoride Contents
摘 要
采用挂片试验和电化学方法研究了316L不锈钢和304不锈钢在含不同浓度F-的人工唾液中的电化学腐蚀行为。结果表明, 随着氟离子摩尔浓度(0~0.15 mol·L-1)的增加, 316L不锈钢腐蚀速率先增大后减小; 而304不锈钢则是先增大后减小再增大的过程。随时间的增加, 两者的腐蚀速率先减小后增大。在F-浓度低于0.05 mol·L-1时, 两种钢的I-E曲线将出现滞后环, 而高于这个浓度则不出现滞后环。
Abstract
The electrochemical corrosion behaviors of 316L and 304 stainless steels in artificial saliva with different fluoride contents were studied. The results showed that the corrosion rates of 316L and 304 stainless steels both increased at first stage and decreased in secondly stage when the contents of fluoride increased. Additionally, for 304 stainless steel, the corrosion rate also increased in third stage. The corrosion rates of 316L and 304 stainless steels both increased at first stage and decreased in secondly stage with the increese of time. The I-E curves of two kinds of steels had hysteresis loops when the concentration of fluoride was only or lower than 0.05 mol·L-1.
中图分类号 TG174.2
所属栏目 试验研究
基金项目
收稿日期 2012/5/18
修改稿日期
网络出版日期
作者单位点击查看
备注朱承飞, 副教授, 博士,
引用该论文: FAN Di-min,ZHU Cheng-fei,XIA Lu,WANG Xiao-jun. Corrosion of Stainless Steels in Artificial Saliva with Different Fluoride Contents[J]. Corrosion & Protection, 2013, 34(4): 314
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】冯本政.牙科用的金属材料[J].口腔材料器械, 2000, 9(3):171-174.
【2】Lo K H, Shek C H, Lai J K L. Recent developments in stainless steels [J].Materials Science and Engineering, 2009, 65(4):39-104.
【3】Wataha J C. Alloys for prosthodontic restorations [J].J Pro-sthet Dent, 2002, 87(4):352-363.
【4】赵耀, 刘嘉俊.牙科合金腐蚀行为的研究进展[J].国际口腔医学杂志, 2011, 38(3):339-342.
【5】Tang Y C, Katsumq S, Fujimoto S, et al. Electrochemical study of type 304 and 316L stainless steels in simulated body fluids and cell cultures [J].Acta Biomaterialia, 2006, 2(6):709-715.
【6】Aleksandra K, Darja K M, Monika J. The corrosion behaviour of austenitic and duplex stainless steels in arti?cial saliva with the addition of off uoride [J].Corrosion Science, 2011, 53(2):776-783.
【7】Mohammad K, Mohammadali E, Mahdavi Mohammad Reza, et al. Determination of effect of iron (Fe2+ and Fe3+) on human erythrocyte AChE activity [J].Asian Journal of Chemistry, 2009, 21(3):2461-2467.
【8】于思荣.金属系牙科材料的应用现状及部分元素的毒副作用[J].金属功能材料, 2000 , 7(1):1-6.
【9】王志洁, 魏虹, 王玲, 等.口腔修复用金属的腐蚀性及对牙周健康的影响[J].河北医药, 2009, 14(39) :1813-1814.
【10】Ionita D, Prodana M, Demetrescu I, et al. Electrochemical stability and surface analysis in evaluation fluoride effect on new bio-alloy Ti7Al3V2Mo2Fe used in dentistry [J].Materials and Corrosion, 2011, 62(12):1111-1116.
【11】Sivakumar B, Kumar S, Sankara Narayanan T S N. Fretting corrosion behavior of Ti-6Al-4V alloy in artificial saliva containing varying concentrations of fluoride ions [J].Wear, 2011, 270(3):317-324.
【12】Koikea M, Martineza K, Guoa L , et al. Evaluation of titanium alloy fabricated using electron beam melting system for dental applications [J].Journal of Materials Processing Technology , 2011, 211(8):1400-1408.
【13】Mareci D, Sutiman D, Cailean A, et, al. Comparative corrosion study of Ag-Pd and Co-Cr alloys used in dental applications [J].Bulletin of Materials Science, 2010, 33(4):491-500.
【14】Wyliea C M, Sheltonb R M, Flemingc G J P, et al. Corrosion of nickel-based dental casting alloys [J].Dental Materials, 2007, 23(6):714-723.
【15】程玮, 汲平, 林雪芬, 等.不同氟浓度的人工唾液对口腔常用金属腐蚀性的研究[J].口腔颌面修复学志.2011, 12(1):10-13.
【2】Lo K H, Shek C H, Lai J K L. Recent developments in stainless steels [J].Materials Science and Engineering, 2009, 65(4):39-104.
【3】Wataha J C. Alloys for prosthodontic restorations [J].J Pro-sthet Dent, 2002, 87(4):352-363.
【4】赵耀, 刘嘉俊.牙科合金腐蚀行为的研究进展[J].国际口腔医学杂志, 2011, 38(3):339-342.
【5】Tang Y C, Katsumq S, Fujimoto S, et al. Electrochemical study of type 304 and 316L stainless steels in simulated body fluids and cell cultures [J].Acta Biomaterialia, 2006, 2(6):709-715.
【6】Aleksandra K, Darja K M, Monika J. The corrosion behaviour of austenitic and duplex stainless steels in arti?cial saliva with the addition of off uoride [J].Corrosion Science, 2011, 53(2):776-783.
【7】Mohammad K, Mohammadali E, Mahdavi Mohammad Reza, et al. Determination of effect of iron (Fe2+ and Fe3+) on human erythrocyte AChE activity [J].Asian Journal of Chemistry, 2009, 21(3):2461-2467.
【8】于思荣.金属系牙科材料的应用现状及部分元素的毒副作用[J].金属功能材料, 2000 , 7(1):1-6.
【9】王志洁, 魏虹, 王玲, 等.口腔修复用金属的腐蚀性及对牙周健康的影响[J].河北医药, 2009, 14(39) :1813-1814.
【10】Ionita D, Prodana M, Demetrescu I, et al. Electrochemical stability and surface analysis in evaluation fluoride effect on new bio-alloy Ti7Al3V2Mo2Fe used in dentistry [J].Materials and Corrosion, 2011, 62(12):1111-1116.
【11】Sivakumar B, Kumar S, Sankara Narayanan T S N. Fretting corrosion behavior of Ti-6Al-4V alloy in artificial saliva containing varying concentrations of fluoride ions [J].Wear, 2011, 270(3):317-324.
【12】Koikea M, Martineza K, Guoa L , et al. Evaluation of titanium alloy fabricated using electron beam melting system for dental applications [J].Journal of Materials Processing Technology , 2011, 211(8):1400-1408.
【13】Mareci D, Sutiman D, Cailean A, et, al. Comparative corrosion study of Ag-Pd and Co-Cr alloys used in dental applications [J].Bulletin of Materials Science, 2010, 33(4):491-500.
【14】Wyliea C M, Sheltonb R M, Flemingc G J P, et al. Corrosion of nickel-based dental casting alloys [J].Dental Materials, 2007, 23(6):714-723.
【15】程玮, 汲平, 林雪芬, 等.不同氟浓度的人工唾液对口腔常用金属腐蚀性的研究[J].口腔颌面修复学志.2011, 12(1):10-13.
相关信息