Metallurgical Microstructure and Properties of High Speed Steel Cementaion Layer Prepared by W-Mo Plasma Surface Co-cementation Using Pulse Single Power Source
摘 要
采用脉冲单电源在Q195钢表面进行了等离子钨钼共渗+渗碳、淬火、回火处理, 形成了表面高速钢渗层; 采用光学显微镜、扫描电镜、X射线衍射仪、硬度仪和磨损试验机对表面组织和性能进行了研究。结果表明: 采用脉冲单电源可以在钢表面形成了明显的共渗层; 在1 000 ℃保温8 h的工艺条件下, 渗层厚度约为110 μm, 渗层表面钨、钼含量分别约为8.4%和9.8%, 表面钨当量超过20%; 渗层主要由Fe7W6和Fe3Mo金属间化合物相组成; 经过渗碳、淬火后碳化物的主要类型是MC、M2C和M6C, 碳化物细小且分布弥散; 再经200 ℃回火后钢的耐磨性较经750 ℃水淬+200 ℃回火T10钢的提高了1.7倍; 经过复合处理后该钢抗回火软化性与W6Mo5Cr4V2钨钼高速钢的近似, 700 ℃回火后硬度仍达到610 HV。
Abstract
Q195 steel was treated by plasma W and Mo co-cementation process using pulse single power source and followed by carburizing, quenching and tempering, then surface high speed steel layer was formed. The microstructure and properties of the surface were studied by optical microscopy, SEM, XRD, microhardness instrument and wear testing machine. The results show that a obvious co-cementation layer was formed on surface of the steel by pulse single power source. The thickness of the layer prepared at 1 000 ℃ for 8 h was 110 μm. The contents of W and Mo were 8.4% and 9.8%, respectively, and the surface tungsten equivalent was over 20%. The main phases of the layers were intermetallic compounds Fe7W6 and Fe3Mo. After carburizing and quenching, the forms of carbides were primary MC, M2C and M6C. The carbides were fine and distributed evenly. The wear resistance of the steel after tempered at 200 ℃ was improved by 1.7 times compared to that of the T10 steel after water quenched at 750 ℃ and tempered at 200 ℃. The anti-temper ability of the compound treated steel was similar to that of the high speed steel W6Mo5Cr4V2, whose hardness was 610 HV after tempered at 700 ℃.
中图分类号 TG156.8
所属栏目
基金项目 信息材料广西重点实验室主任研究课题(桂科能0710908-06-Z); 国家自然科学基金资助项目(50764002); 2009年广西研究生科研创新项目(2009105950805M37)
收稿日期 2010/2/28
修改稿日期 2010/10/16
网络出版日期
作者单位点击查看
备注申罡(1985-), 男, 湖南邵东人, 硕士研究生。
引用该论文: SHEN Gang,GAO Yuan,WANG Cheng-lei,BU Gen-tao. Metallurgical Microstructure and Properties of High Speed Steel Cementaion Layer Prepared by W-Mo Plasma Surface Co-cementation Using Pulse Single Power Source[J]. Materials for mechancial engineering, 2011, 35(3): 60~63
申罡,高原,王成磊,卜根涛. 采用脉冲单电源进行钨钼等离子表面共渗制备高速钢渗层的组织与性能[J]. 机械工程材料, 2011, 35(3): 60~63
被引情况:
【1】蔡航伟,高原,马志康,王成磊, "奥氏体不锈钢表面双辉等离子渗锆的动力学",机械工程材料 39, 102-106(2015)
【2】韦文竹,高原,张维,王成磊,陆小会,张光耀, "钨、钼、镝等离子共渗时镝的扩散行为及机理",机械工程材料 39, 63-66(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】高原, 徐晋勇, 高清, 等.双辉离子渗金属特点[J].热加工工艺, 2006(6): 56-58.
【2】徐晋勇, 刘燕萍, 王建忠, 等.Q235钢双层辉光等离子Mo-Cr共渗及其热处理工艺研究[J].材料热处理学报,2006,27(1): 104-107.
【3】徐晋勇, 龙向前, 刘燕萍, 等.双层辉光离子渗Cr合金层组织和性能[J].煤炭工艺,2005, 30(5): 673-677.
【4】邓玉昆, 陈景榕, 王世帅, 等.高速工具钢[M].北京: 机械工业出版社, 2002: 118.
【5】晁拥军.工模具材料强化处理应用技术[M].北京: 机械工业出版社, 2008: 248.
【2】徐晋勇, 刘燕萍, 王建忠, 等.Q235钢双层辉光等离子Mo-Cr共渗及其热处理工艺研究[J].材料热处理学报,2006,27(1): 104-107.
【3】徐晋勇, 龙向前, 刘燕萍, 等.双层辉光离子渗Cr合金层组织和性能[J].煤炭工艺,2005, 30(5): 673-677.
【4】邓玉昆, 陈景榕, 王世帅, 等.高速工具钢[M].北京: 机械工业出版社, 2002: 118.
【5】晁拥军.工模具材料强化处理应用技术[M].北京: 机械工业出版社, 2008: 248.
相关信息