Production Status and Development Direction of Wear Resistant Steel with Low Alloy and High Strength in China
摘 要
介绍了国内外低合金高强度耐磨钢的研究进展, 主要分析了我国该类耐磨钢的化学成分、组织、性能及生产工艺现状, 指出了国内耐磨钢在各方面与国外先进企业的差距, 最后对我国低合金高强度耐磨钢的发展方向进行了展望。
Abstract
The research progress of wear resistant steel with low alloy and high strength at home and abroad is introduced, the chemical composition, microstructure, properties and production technology of the steels in China are analyzed and the distance between domestic enterprise and the first-class foreign enterprises about wear resistant steel in every respect is put forward. At last, the development direction of wear resistant steel with low alloy and high strength in China is look forward.
中图分类号 TG146.1
所属栏目 综述
基金项目
收稿日期 2011/2/3
修改稿日期 2011/12/12
网络出版日期
作者单位点击查看
备注李文斌(1978-), 男, 四川巴中人, 工程师, 学士。
引用该论文: LI Wen-bin,FEI Jing,CAO Zhong-xiao,SU Hong-ying,LI Yang. Production Status and Development Direction of Wear Resistant Steel with Low Alloy and High Strength in China[J]. Materials for mechancial engineering, 2012, 36(2): 6~10
李文斌,费静,曹忠孝,苏红英,李阳. 我国低合金高强度耐磨钢的生产现状及发展方向[J]. 机械工程材料, 2012, 36(2): 6~10
被引情况:
【1】王晓南,杜林秀,邸洪双, "低成本热轧700MPa级载重汽车车厢板的耐磨性能",机械工程材料 37, 63-67(2013)
【2】邓汉忠,孟祥峰, "正火温度对NM360耐磨钢堆焊层组织与性能的影响",机械工程材料 39, 1-5(2015)
【3】斯松华,徐震霖,方俊飞, "不同t8/5条件下NM400耐磨钢焊接热影响区的组织及性能",机械工程材料 39, 7-10(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】LEE O S, HAN M S, BAEK J, et al. Damage assessment of composite structures subjected to low velocity impact [J].Key Engineering Materials, 2004, 261(1):289-294.
【2】ZHAO X Z, CUI N, LUO J, et al.Effects of erosion on corrosion of type 430 and 316 stainless steels in aqueous environments [J].British Corrosion Journal, 2003, 37(1):63-68.
【3】符寒光, 胡开华.高硼铸造耐磨合金研究的进展[J].现代铸铁, 2005 (3):32-33.
【4】程巨强, 刘志学, 徐振华, 等.热轧、低温回火态1250MPa级新型贝氏体耐磨钢板的组织和性能[J].机械工程材料, 2005, 29(10):29-31.
【5】张宇斌, 秦洁.高强度耐磨钢板的生产现状及发展[J].世界钢铁, 2009 (6):23-26.
【6】沈宗树, 陈国喜, 孙家枢, 等.Hardox 500耐磨钢板的焊接性及其应用[J].机械工程材料, 2006, 30(7):63-65.
【7】罗丽军.国外高强度耐磨钢生产概述[J].宽厚板, 2008, 14(3):46-48.
【8】孙本荣, 王有铭, 陈瑛.中厚钢板生产[M].北京: 冶金工业出版社, 1993.
【9】刑秀芝, 陈文, 杨武鸣.金属材料应用手册[M].西安: 陕西科学技术出版社, 1989.
【10】王祖滨, 东涛.低合金高强度钢[M].北京: 原子能出版社, 1996.
【11】仝健民.耐磨钢研究进展[J].水利电力机械, 2003, 25(2):31-32.
【12】王彦凤, 邱常明, 张贵杰.耐磨钢的发展及技术进步[J].浙江冶金, 2007(5):13-15.
【13】梁高飞, 许振明, 李建国, 等.抗磨钢的最新进展[J].特殊钢, 2002, 23(4):1-4.
【14】KOPAC J. Hardening phenomena of Mn-austenite steels in the cutting process[J].Journal of Materials Processing Technology, 2001, 109(1/2):96-104.
【15】EL-MAHALLAWI I, ABDEL-KARIM R, NAGUIB A. Evaluation of effect of chromium on wear performance of high manganese steel[J]. Materials Science and Technology, 2001, 17:1385-1390.
【16】王有铭.钢材的控制轧制和控制冷却[M].北京: 冶金工业出版社, 1995.
【17】张锦志, 米国发, 关西周.低合金耐磨钢的研究与应用进展[J].金属加工, 2009(15):30-31.
【18】王金参, 赵剑波, 孙平.耐磨材料的研究现状[J].金属加工, 2010 (7):69-72.
【2】ZHAO X Z, CUI N, LUO J, et al.Effects of erosion on corrosion of type 430 and 316 stainless steels in aqueous environments [J].British Corrosion Journal, 2003, 37(1):63-68.
【3】符寒光, 胡开华.高硼铸造耐磨合金研究的进展[J].现代铸铁, 2005 (3):32-33.
【4】程巨强, 刘志学, 徐振华, 等.热轧、低温回火态1250MPa级新型贝氏体耐磨钢板的组织和性能[J].机械工程材料, 2005, 29(10):29-31.
【5】张宇斌, 秦洁.高强度耐磨钢板的生产现状及发展[J].世界钢铁, 2009 (6):23-26.
【6】沈宗树, 陈国喜, 孙家枢, 等.Hardox 500耐磨钢板的焊接性及其应用[J].机械工程材料, 2006, 30(7):63-65.
【7】罗丽军.国外高强度耐磨钢生产概述[J].宽厚板, 2008, 14(3):46-48.
【8】孙本荣, 王有铭, 陈瑛.中厚钢板生产[M].北京: 冶金工业出版社, 1993.
【9】刑秀芝, 陈文, 杨武鸣.金属材料应用手册[M].西安: 陕西科学技术出版社, 1989.
【10】王祖滨, 东涛.低合金高强度钢[M].北京: 原子能出版社, 1996.
【11】仝健民.耐磨钢研究进展[J].水利电力机械, 2003, 25(2):31-32.
【12】王彦凤, 邱常明, 张贵杰.耐磨钢的发展及技术进步[J].浙江冶金, 2007(5):13-15.
【13】梁高飞, 许振明, 李建国, 等.抗磨钢的最新进展[J].特殊钢, 2002, 23(4):1-4.
【14】KOPAC J. Hardening phenomena of Mn-austenite steels in the cutting process[J].Journal of Materials Processing Technology, 2001, 109(1/2):96-104.
【15】EL-MAHALLAWI I, ABDEL-KARIM R, NAGUIB A. Evaluation of effect of chromium on wear performance of high manganese steel[J]. Materials Science and Technology, 2001, 17:1385-1390.
【16】王有铭.钢材的控制轧制和控制冷却[M].北京: 冶金工业出版社, 1995.
【17】张锦志, 米国发, 关西周.低合金耐磨钢的研究与应用进展[J].金属加工, 2009(15):30-31.
【18】王金参, 赵剑波, 孙平.耐磨材料的研究现状[J].金属加工, 2010 (7):69-72.
相关信息