低温等离子体表面改性太阳能电池背板的粘接性能
Adhesive Property of Solar Cell Backplane Modified by Low Temperature Plasma Surface Treatment
摘 要
利用低温等离子体改性技术对太阳能电池背板用PET薄膜和PVDF薄膜表面进行处理, 研究了等离子体处理时间、放电功率、气体压力、工作气体对薄膜接触角的影响, 并测试了太阳能电池背板的剥离强度。结果表明: 经等离子改性处理后的PET和PVDF薄膜接触角减小, 粘接性能得到了改善; 在放电功率为75 W、工作压力为50 Pa的条件下处理3 min后, 太阳能电池背板的剥离强度从处理前的3.2 N·cm-1提高到11.9 N·cm-1。
太阳能电池背板
粘接性能
plasma modification
solar cell backplane
adhesive property
Abstract
The surface of PET and PVDF films used for solar cell backplane were modified by low temperature plasma treatment, the effects of treatment time, discharge power, gas pressure, work gases on contact angle of films, and the peel strength of the solar cell backplane was tested. The result show that the contact angle of PET and PVDF films modified by plasma treatment decreased and its adhesive property was improved, the peel strength of solar cell backplane increased from 3.2 N·cm-1 to 11.9 N·cm-1 under the conditions of treatment time was 3 min, discharge power was 75 W and work gas pressure was 50 Pa.
中图分类号 TG146.1
所属栏目 材料性能及其应用
基金项目
收稿日期 2011/8/5
修改稿日期 2012/1/7
网络出版日期
作者单位点击查看
备注陈新(1987- ), 男, 山西吕梁人, 硕士研究生。
引用该论文: CHEN Xin,RUI Yan-nian,WEN Yi-fang,WANG Hong-wei. Adhesive Property of Solar Cell Backplane Modified by Low Temperature Plasma Surface Treatment[J]. Materials for mechancial engineering, 2012, 36(9): 65～68
陈新,芮延年,温贻芳,王红卫. 低温等离子体表面改性太阳能电池背板的粘接性能[J]. 机械工程材料, 2012, 36(9): 65～68
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】吴君毅.PVDF树脂在太阳能电池模组背板上的应用[J].有机氟工业, 2009(4): 32-34.
【2】刘小建, 苑会林.氟塑料薄膜在光伏电源和燃料电池中的应用[J].塑料工业, 2011, 39(4): 109-115.
【3】陈杰瑢.低温等离子体化学及其应用[M].北京: 科学出版社, 2001.
【4】MARYAM A, SIAMAK M, MOJTABA M, et al. Investigating the effect of power/time in the wettability of Ar and O2 gas plasma-treated low-density polyethylene[J]. Progress in Organic Coatings, 2009, 64: 482-488.
【5】NAVANEETHA K, SELVARAJAN V, DESHMUKH R. Effects of operating parameters on DC glow discharge plasma induced PET film surface[C]//3rd National Symposium on Plasma Science & Technology. Bristol, UK: IOP Publishing Ltd., 2010: 1-7.
【6】陈冰, 陈银, 王红卫.低温氩等离子体表面改性提高PET亲水性[J].纺织学报, 2007, 28(6): 28-31.
【7】温贻芳, 陈新, 王士喜, 等.空心阴极远区等离子体接枝聚合表面改性丙纶无纺布的吸碱性能[J].机械工程材料, 2011, 35(8): 70-74.
【8】王春莹, 王潮霞.真空氧等离子体表面改性涤纶织物研究[J].合成纤维工业, 2010, 33(5): 28-30.
【9】PARK Y, INAGAKI N.Surface modification of poly(vinylidene fluoride) film by remote Ar, H2, and O2 plasmas[J]. Polymer, 2003, 44: 1569-1575.
【10】MARIANA D, CARMINA L, TATIANA P. Surface modifications of polyvinylidene fluoride (PVDF) under rf Ar plasma[J]. Polymer Degradation and Stability, 1998, 61: 65-72.
【2】刘小建, 苑会林.氟塑料薄膜在光伏电源和燃料电池中的应用[J].塑料工业, 2011, 39(4): 109-115.
【3】陈杰瑢.低温等离子体化学及其应用[M].北京: 科学出版社, 2001.
【4】MARYAM A, SIAMAK M, MOJTABA M, et al. Investigating the effect of power/time in the wettability of Ar and O2 gas plasma-treated low-density polyethylene[J]. Progress in Organic Coatings, 2009, 64: 482-488.
【5】NAVANEETHA K, SELVARAJAN V, DESHMUKH R. Effects of operating parameters on DC glow discharge plasma induced PET film surface[C]//3rd National Symposium on Plasma Science & Technology. Bristol, UK: IOP Publishing Ltd., 2010: 1-7.
【6】陈冰, 陈银, 王红卫.低温氩等离子体表面改性提高PET亲水性[J].纺织学报, 2007, 28(6): 28-31.
【7】温贻芳, 陈新, 王士喜, 等.空心阴极远区等离子体接枝聚合表面改性丙纶无纺布的吸碱性能[J].机械工程材料, 2011, 35(8): 70-74.
【8】王春莹, 王潮霞.真空氧等离子体表面改性涤纶织物研究[J].合成纤维工业, 2010, 33(5): 28-30.
【9】PARK Y, INAGAKI N.Surface modification of poly(vinylidene fluoride) film by remote Ar, H2, and O2 plasmas[J]. Polymer, 2003, 44: 1569-1575.
【10】MARIANA D, CARMINA L, TATIANA P. Surface modifications of polyvinylidene fluoride (PVDF) under rf Ar plasma[J]. Polymer Degradation and Stability, 1998, 61: 65-72.
相关信息
