Evaluating Stress Corrosion Cracking Susceptibility of 304L Stainless Steel by Small Punch Test
摘 要
利用小冲杆试验对304L不锈钢进行了应力腐蚀敏感性评估, 研究了加载速度和腐蚀介质对评估结果的影响, 并对小冲杆试样的断口形貌和显微组织进行了分析。结果表明: 最适合304L不锈钢评估的小冲杆应力腐蚀试验介质为1.0 mol·L-1 NaCl+0.5 mol·L-1 HCl混合溶液, 加载速度为3×10-3 mm·min-1; 在以上介质中, 304L不锈钢小冲杆试样断口以穿晶解理断裂为主, 部分为准解理断裂; 小冲杆试验法是一种有效的应力腐蚀敏感性评估手段, 且具有快速近乎无损等特点。
Abstract
Small punch test (SPT) was used to evaluate stress corrosion cracking (SCC) susceptibility of 304L stainless steel, effects of load rate and corrosion medium on evaluating results were studied, and fracture appearance and microstructure evolution of the small punch sample were analysed. The results show that the most appropriate corrosion medium for evaluating stress corrosion cracking susceptibility of 304L stainless steel was mix solution of 1.0 mol·L-1 NaCl and 0.5 mol·L-1 HCl , and the most appropriatin load rate was 3×10-3 mm·min-1, the main fracture of 304L stainless steel sample punch sample was main cleavage frature, and part of quasi-cleavage appearance was observed. The results proved that small punch test was an effective stress corrosion cracking susceptibility evaluation method, and which was fast and nondestructive.
中图分类号 TG142.1 TG174.3
所属栏目 试验研究
基金项目 国家自然科学基金资助项目 (51075148); 国家质检总局公益性项目(201110029)
收稿日期 2012/1/21
修改稿日期 2012/12/10
网络出版日期
作者单位点击查看
备注白涛(1984-), 男, 河北唐山人, 博士研究生。
引用该论文: BAI Tao,GUAN Kai-shu,CHEN Peng. Evaluating Stress Corrosion Cracking Susceptibility of 304L Stainless Steel by Small Punch Test[J]. Materials for mechancial engineering, 2013, 37(1): 36~39
白涛,关凯书,陈鹏. 用小冲杆试验法评估304L不锈钢的应力腐蚀敏感性[J]. 机械工程材料, 2013, 37(1): 36~39
被引情况:
【1】徐 亮,马东方,蔡红生,耿进锋, "基于小冲杆试验技术测试P91钢的强度",机械工程材料 40, 43-48(2016)
【2】黄廷尊,杨中娜,吴文烈,刘 川, "超声冲击处理对大厚度高强钢焊接接头抗拉强度的影响",机械工程材料 40, 106-110(2016)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】艾芒, 杨镇, 王志文.小冲杆试验法的起源、发展和应用[J].机械强度, 2000, 22(4): 279-282.
【2】刘玉.小冲杆试验技术在金属材料性能评定中的应用[J].机械研究与应用, 2007, 20(4): 10-12.
【3】韩浩.小冲杆实验测定金属材料常温性能的研究[D].上海: 华东理工大学, 2003.
【4】郭良辉.评价材料抗断裂性能的小冲杆试验技术[D].上海: 华东理工大学, 2004.
【5】关凯书, 李璞, 黄奕昶, 等.小冲杆试验评价材料的断裂韧度[J].压力容器, 2007, 24(12): 8-11.
【6】杨镇.小冲杆微试样技术用于测定材料高温蠕变性能的研究[D].上海: 华东理工大学, 2001.
【7】YU H S, NA E G, CHUNG S H. Assessment of stress corrosion cracking susceptibility by a small punch test[J].Fatigue Fract Eng Mater Struct, 1999, 22: 889-896. 欢迎来稿欢迎订阅欢迎刊登广告
【2】刘玉.小冲杆试验技术在金属材料性能评定中的应用[J].机械研究与应用, 2007, 20(4): 10-12.
【3】韩浩.小冲杆实验测定金属材料常温性能的研究[D].上海: 华东理工大学, 2003.
【4】郭良辉.评价材料抗断裂性能的小冲杆试验技术[D].上海: 华东理工大学, 2004.
【5】关凯书, 李璞, 黄奕昶, 等.小冲杆试验评价材料的断裂韧度[J].压力容器, 2007, 24(12): 8-11.
【6】杨镇.小冲杆微试样技术用于测定材料高温蠕变性能的研究[D].上海: 华东理工大学, 2001.
【7】YU H S, NA E G, CHUNG S H. Assessment of stress corrosion cracking susceptibility by a small punch test[J].Fatigue Fract Eng Mater Struct, 1999, 22: 889-896. 欢迎来稿欢迎订阅欢迎刊登广告
相关信息