搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
碳对烧结态和淬火态钛铌合金物相组成与压缩性能的影响
          
Effects of Carbon on Phases and Compressive Properties of Sintered and Quenched TiNb Alloys

摘    要
采用X射线衍射仪和材料试验机研究了碳对烧结态和淬火态钛铌合金的物相组成和压缩性能的影响。结果表明: 两种烧结态合金的组织均由α相和β相组成, 但含碳合金中β相数量多, 导致其弹性模量较小, 屈服强度较大;两种淬火态合金的显微组织均由α″和βM两相组成, 其弹性模量和压缩屈服强度均比相同成分烧结态合金的小;与淬火态不含碳合金相比;淬火态含碳合金中含有较多低强度的β亚相, 故其弹性模量和屈服强度均较小。
标    签 钛铌合金   弹性模量   屈服强度   物相   TiNb alloy   elastic modulus   yield strength   phase  
 
Abstract
The effects of carbon on phase and compressive properties of sintered and quenched TiNb alloys were studied by using X-ray diffraction and materials testing, respectively.The results show that the microstructure of the two sintered alloys consisted of α and β phases, but the sintered Ti-35.4Nb-0.05C alloy contained more β phase, and thus resulted it owning lower elastic modulus and higher yield strength. The microstructure of the two quenched alloys consisted of α″ and βM phases, and comparing with the sintered alloys, the quenched alloys owned lower elastic modules and yield strength. Comparing with the quenched alloy without carbon, the quenched alloy with carbon had lower elastic modules and yield strength for more low-strength β亚 phase in it.

中图分类号 TH142.3

 
  中国光学期刊网论文下载说明


所属栏目 材料性能及其应用

基金项目 江苏青蓝工程资助项目;江苏省高校科研成果产业化推进项目(JHZD2012-48);苏州市科技计划项目(SGZ2012058);苏州市职业大学校级项目(2011SZDYJ10, 2012SZDYY01, JDX1003)

收稿日期 2012/9/25

修改稿日期 2013/6/21

网络出版日期

作者单位点击查看

备注顾苏怡(1978-), 女, 江苏苏州人, 讲师, 硕士。

引用该论文: GU Su-yi,DU Jie,YAN Yong-jian,YANG Hong,ZHOU Zheng-cun. Effects of Carbon on Phases and Compressive Properties of Sintered and Quenched TiNb Alloys[J]. Materials for mechancial engineering, 2013, 37(9): 42~44
顾苏怡,杜洁,严勇健,杨洪,周正存. 碳对烧结态和淬火态钛铌合金物相组成与压缩性能的影响[J]. 机械工程材料, 2013, 37(9): 42~44


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】JONES N G, DASHWOOD R J, JACKSON M, et al. β phase decomposition in Ti-5Al-5Mo-5V-3Cr[J].Acta Materialia, 2009, 57: 3830-3839.
 
【2】KIM H S, KIM W Y, LIM S H. Microstructure and elastic modulus of Ti-Nb-Si ternary alloys for biomedical applications[J].Scr Mater, 2006, 54: 887-891.
 
【3】BUENCONSEJO P J S, KIM H Y, MIYAZAKI S. Effect of ternary alloying elements on the shape memory behavior of Ti-Ta alloys[J].Acta Materialia, 2009, 57: 2509-2515.
 
【4】MURRAY J L. Phase diagram of binary titanium alloys;M].Ohio: ASM International, 1987.
 
【5】MATLAKHOVA L A, MATLAKHOV A N, MONTEIRO S N, et al. Influence of temperature on the properties and phase transformation in Ti-Nb alloys with 2%Al[J].Revista Matéria, 2006, 11: 41-47.
 
【6】LEE C M, JU C P, CHERN LIN J H. Structure-property relationship of cast Ti-Nb alloys[J].Journal of Oral Rehabilitation, 2002, 29: 314-322.
 
【7】MATLAKHOVA L A, MATLAKHOV A N, MONTEIRO S N. Temperature effect on the elastic modulus, internal friction and related phase transformation in Ti-Nb-2%Al quenched alloys[J].Mater Characterization, 2008, 59: 1234-1240.
 
【8】KIM J I, KIM H Y, INAMURA T, et al. Shape memory characteristics of Ti-22Nb-(2-8)Zr(at.%) biomedical alloys[J].Mater Sci Eng A, 2005, 403: 334-339.
 
【9】KIM H Y, SATORU H, KIM J I, et al. Mechanical properties and shape memory behavior of Ti-Nb alloys[J].Mater Trans, 2004, 45: 2443-2448.
 
相关信息
   标题 相关频次
 油淬Ni64Al36合金的逆马氏体相变
 10
 不同成分及热处理态无镍钛基合金的物相组成
 5
 4A分子筛性能表征方法及其应用
 2
 DP590带钢屈服和抗拉强度的微磁定量预测
 2
 GB/T 228.1-2010中应力速率的三种理解及在宣贯和实施过程中出现的问题
 2
 HRB500热轧带肋钢筋力学性能不合格的原因及工艺改进
 2
 LB27和LB20铝包钢芯线的拉伸行为
 2
 Nb3Sn超导线材室温拉伸试验方法
 2
 X射线衍射法快速测定矿产品中的主要物相和主元素含量
 2
 按照ISO 6892-1:2019附录G方法评定弹性模量的测量不确定度
 2
 残余应力对Oliver-Pharr方法测量弹性模量的影响
 2
 纯钛表面等离子渗钼梯度改性层的微尺度准静态接触力学性能
 2
 弹性模量线的选择对钢材屈服强度Rp0.2测量值的影响
 2
 低弹性模量Ti-Nb-Zr合金的显微组织与力学性能
 2
 低合金高强度大规格H型钢屈服强度偏低原因分析与改进
 2
 低碳钢弹性模量的实验室间比对试验
 2
 低硬度P91钢管件布氏硬度转换值存在偏差原因分析
 2
 电弧增材成型铝合金的组织及力学性能
 2
 对GB/T 228.1-2010中拉伸试样制备的建议
 2
 防喷器壳体材料疲劳试验的声发射信号分析
 2
 钢管静水压爆破试验中屈服强度的测定
 2
 高强度铝合金钻杆的拉伸试验方法
 2
 管线钢管屈服强度的稳定性试验
 2
 含1.6%碳的超高碳钢的力学性能
 2
 焊接接头几种取样方式拉伸试验结果对比分析
 2
 横梁位移速率控制拉伸试验速率的解读与实践
 2
 灰铸铁材料的静力学性能与疲劳性能
 2
 机械镀锌层的X射线衍射分析
 2
 基于能量法计算材料的弹性模量和压痕硬度
 2
 基于压痕测试技术的聚乙烯老化力学性能评价
 2