Effect of Heat Treatment Processes on Fatigue Crack Growth Rates of Hardened-tempered 8Cr4Mo4V Steel
摘 要
研究了四组不同工艺热处理的8Cr4Mo4V钢试样的疲劳裂纹扩展速率及其疲劳断口。结果表明: 淬回火8Cr4Mo4V钢的室温疲劳裂纹扩展速率在裂纹稳定扩展阶段符合Paris公式, 其大小与热处理工艺有关, 主要取决于马氏体中的固溶碳含量, 马氏体中的固溶碳含量越高, 疲劳裂纹扩展速率也越大, 而与该钢是否经过冷处理没有明显关系; 淬回火8Cr4Mo4V钢疲劳断口的微观形貌以准解理为主, 马氏体(211)晶面的X射线衍射峰半高宽越小, 疲劳裂纹扩展速率也越小, 疲劳断口上的拉伸残余应力则越大。
Abstract
The fatigue crack growth rates and the fatigue fracture surfaces had been investigated about four groups of 8Cr4Mo4V steel specimens with different heat treatment processes. The result show that at room temperature the fatigue crack steady growth rates of the hardened-tempered 8Cr4Mo4V steel accorded with Paris relation. The fatigue crack growth rates related with the heat treatment process, depended mainly on carbon conten in the martensite, and did not obviously related with the cold treatment. The main microscopic appearance of the fatigue fracture surfaces was quasi-cleavage. The narrower the X-ray FWHM of the martensite(211) was, the lower the crack growth rate was, and the greater the tensile residual stress on the fracture surface was.
中图分类号 TG113.25+5
所属栏目 试验与研究
基金项目 国家科技攻关资助项目(JPPT-ZCGX1-1)
收稿日期 2012/3/15
修改稿日期
网络出版日期
作者单位点击查看
备注于芸(1961-),女,高级工程师,学士。
引用该论文: YU Yun,ZHU Guang-hui,GAO Jian-jie. Effect of Heat Treatment Processes on Fatigue Crack Growth Rates of Hardened-tempered 8Cr4Mo4V Steel[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2012, 48(10): 635~639
于芸,朱光辉,高建杰. 热处理工艺对8Cr4Mo4V钢疲劳裂纹扩展速率的影响[J]. 理化检验-物理分册, 2012, 48(10): 635~639
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB/T 6398-2000金属材料疲劳裂纹扩展速率试验方法[S].
【2】刘云旭.金属热处理原理[M]. 北京: 机械工业出版社, 1981: 72-73.
【3】侯增寿,卢光熙. 晶体缺陷与金属热处理[M]. 北京: 机械工业出版社, 1988:173-182,203-208.
【4】范雄.X 射线金属学[M]. 北京: 机械工业出版社, 1981:147-149.
【5】褚武扬.断裂力学基础[M]. 北京: 科学出版社, 1979:128-129.
【6】钟群鹏,赵子华.断口学[M]. 北京: 高等教育出版社, 2005:279-281.
【2】刘云旭.金属热处理原理[M]. 北京: 机械工业出版社, 1981: 72-73.
【3】侯增寿,卢光熙. 晶体缺陷与金属热处理[M]. 北京: 机械工业出版社, 1988:173-182,203-208.
【4】范雄.X 射线金属学[M]. 北京: 机械工业出版社, 1981:147-149.
【5】褚武扬.断裂力学基础[M]. 北京: 科学出版社, 1979:128-129.
【6】钟群鹏,赵子华.断口学[M]. 北京: 高等教育出版社, 2005:279-281.
相关信息