Influence Factors for Abrasive Resistance of Aluminum Alloy AnodicOxide Coatings by Abrasive Jet Method
摘 要
铝合金阳极氧化膜的耐磨性反映了膜层对摩擦作用的抵抗能力, 是氧化膜的一个重要质量指标, 可通过喷磨试验来进行测试。考察了测试压力、测试角度、测试距离等对喷磨试验结果的影响。结果表明: 喷磨时间随着测试角度的增大而减少, 随着测试压力的增大而减小, 随着测试距离的变化出现先减少后增加的趋势。对于不同的试样, 应选择合适的试验参数来进行检测。
Abstract
The abrasive resistance is an important quality index reflecting erosion or wear resistance ofaluminum alloy anodic oxidation coating.It can be evaluated by abrasive jet test method.Some main influencefactors for abrasive jet test were researched, including test pressure, test angle and test distance etc.The resultsshowed that the abrasive jet time decreased as the increases in test angle, the abrasive jet time decreased as theincreases in test pressure, the abrasive jet time decreased and then increased as the increases in test distance.Different test parameters should be used for different samples.
中图分类号 TG174.451
所属栏目 试验与研究
基金项目 科技部创新方法工作专项项目《新型高性能铝合金理化分析方法的研究》(2009IM031900)
收稿日期 2012/5/17
修改稿日期
网络出版日期
作者单位点击查看
备注纪红(1978—), 女, 高级工程师。
引用该论文: JI Hong,LI Yong-feng. Influence Factors for Abrasive Resistance of Aluminum Alloy AnodicOxide Coatings by Abrasive Jet Method[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2012, 48(11): 724~726
纪红,李永丰. 喷磨法测定铝合金阳极氧化膜耐磨性的影响因素[J]. 理化检验-物理分册, 2012, 48(11): 724~726
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】朱祖芳.铝合金阳极氧化与表面处理技术[M].北京: 化学工业出版社, 2004: 306.
【2】GB/T 12967.7—2010 铝及铝合金阳极氧化膜检测方法 第7部分: 用落砂试验仪测定阳极氧化膜的耐磨性[S].
【3】GB/T 12967.2—2008 铝及铝合金阳极氧化膜检测方法 第2部分: 用轮式磨损试验仪测定阳极氧化膜的耐磨性和耐磨系数[S].
【4】GB/T 12967.1—2008 铝及铝合金阳极氧化膜检测方法 第1部分: 用喷磨试验仪测定阳极氧化膜的平均耐磨性[S].
【5】GB/T 8013—2007 铝及铝合金阳极氧化膜与有机聚合物膜[S].
【6】YS/T 773—2011太阳能电池框架用铝合金型材[S].
【7】ISO 8251—2011 Anodizing Aluminium and its Alloys—Measurement of Abrasion Resistance of Anodic Oxida-tion Coatings[S].
【2】GB/T 12967.7—2010 铝及铝合金阳极氧化膜检测方法 第7部分: 用落砂试验仪测定阳极氧化膜的耐磨性[S].
【3】GB/T 12967.2—2008 铝及铝合金阳极氧化膜检测方法 第2部分: 用轮式磨损试验仪测定阳极氧化膜的耐磨性和耐磨系数[S].
【4】GB/T 12967.1—2008 铝及铝合金阳极氧化膜检测方法 第1部分: 用喷磨试验仪测定阳极氧化膜的平均耐磨性[S].
【5】GB/T 8013—2007 铝及铝合金阳极氧化膜与有机聚合物膜[S].
【6】YS/T 773—2011太阳能电池框架用铝合金型材[S].
【7】ISO 8251—2011 Anodizing Aluminium and its Alloys—Measurement of Abrasion Resistance of Anodic Oxida-tion Coatings[S].
相关信息