搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
热电材料的应用、研究及性能测试进展
          
Progress in Application, Research and Properties Testing of Thermoelectric Materials

摘    要
随着能源的日益紧缺以及环境污染问题的日趋严重, 热电材料作为一种热能和电能相互转换的功能性新材料,对环境没有污染;以热电材料为核心部件的热电器件的应用无需使用传动部件; 工作时无噪音、无排弃物; 而且热电装置的核心部件热电材料服役状态稳定, 使用寿命长, 是具有广泛应用前景的环境友好型功能材料。简要介绍功能热电材料的应用及其研究现状, 详细阐述了热电性能的检测方法及其相关测试标准, 最后介绍了热电性能检测设备的开发和应用。
标    签 热电材料   性能测试   标准   仪器   thermoelectric materials   performance testing   standard   instrument  
 
Abstract
In the face of the impending problems of energy shortage and environmental pollution, the thermoelectric materials, as one of the functional materials for energy conversion and thermoelectric refrigeration, is not polluted to the environment, and is applied in thermoelectric devices without transmission parts. And the thermoelectric devices are working stably without noise and waste, and have long service life. Therefore the thermoelectric materials have a widely application prospect as environmental friendly functional materials. The progress in application and research of thermoelectric materials was briefly given, and the test method of thermoelectric performance and the relevant test standard were discussed especially. Finally, the development and application of test instruments of thermoelectric properties, including electric and thermal performance, were introduced.

中图分类号 TB34

 
  中国光学期刊网论文下载说明


所属栏目 综述

基金项目 国家质量监督检验检疫总局科技计划项目(2012IK049); 国家自然科学基金资助项目(51001042)

收稿日期 2012/8/13

修改稿日期

网络出版日期

作者单位点击查看

备注李蒙(1989-),男,硕士研究生。

引用该论文: LI Meng,LI Hong-tao,WU Yi-wen,ZHI Hui-bo,GONG Si-wei,ZHOU Xiao-gang,WU Xiao-hong,ZHOU Hui,JI Cheng-chang,SU Tai-chao. Progress in Application, Research and Properties Testing of Thermoelectric Materials[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2013, 49(1): 27~33
李蒙,李洪涛,吴益文,郅惠博,龚思维,周小刚,吴晓红,周辉,季诚昌,宿太超. 热电材料的应用、研究及性能测试进展[J]. 理化检验-物理分册, 2013, 49(1): 27~33


被引情况:


【1】李洪涛,李蒙,郅惠博,吴益文,王彪,季诚昌,宿太超, "热电材料电阻率测试的影响因素",理化检验-物理分册 50, 161-164(2014)

【2】张林,赵志敏,朱星玥,王乐新,于银山, "小型快速模糊神经网络温控系统的设计与实现",理化检验-物理分册 50, 878-881(2014)



论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】DISALVO F J. Thermoelectric cooling and power generation[J]. Science,1999,285:703-706.
 
【2】DICK P J. Testing of the improved SNAP-19 power for advanced space missions[C]//The 2th International Symposium on Power,Madrid:[s.n.],1972:571-588.
 
【3】ROUKLOVE P,TRUSCELLO V. Long term tests of SNAP-19 thermoelectric generator[C]//Proceedings of 7th IECER, San Diago:[s.n.],1972:186-193.
 
【4】KELLY C E. The MHW converter[C]//Proceedings of 10th IECEC,Newark Delaware:[s.n.],1975:880-886.
 
【5】RIORDAN P. The US department of energy’s thermoelectric development program for space power[C]//Proceedings of 4th International Conference on Thermoelectric Energy Conversion,Arlington:[s.n.],1982:15-25.
 
【6】KAJIKAWA T,ONISHI T,OBARA H. Present status and prospect of the development for advanced thermoelectric conversion systems[J]. The 25th International Conference on Thermoelectrics,Vienna:[s.n.],2006:351-355.
 
【7】OOTA T,FUJITA K. Development of thermoelectric power generation system[J]. The 25th International Conference on Thermoelectrics,Vienna:[s.n.],2006:329-333.
 
【8】鲍思前. La填充Skutterudite热电材料的制备、结构及性能研究[D]. 武汉: 华中科技大学,2006.
 
【9】况学成,郝恩奇. 热电材料及其研究现状[J]. 中国陶瓷工业,2008,15(5):27-32.
 
【10】SLACK G A. New Materials and Performance Limits of Thermoelectrics Cooling,in CRC Handbook of Thermoelectrics[M]. ROWE D M,ed. Boca Raton:CRC Press,1994:407.
 
【11】HICKS L D,DRESSELHAUS M S. Effect of quantum-well structures on thermoelectric figure of merit[J]. Phys Rev B,1993(47):12727-12731.
 
【12】OKANO K,TAKAGI Y. Application of SiC-Si functionally gradient material to thermoelectric energy conversion device[J]. Electrical Engineering in Japan (English Translation of Denki Gakkai Ronbunshi),2000,117(6):9.
 
【13】南军, 赵淑金, 邓元,等. Ca3Co4O9陶瓷的制备和热电性能[J]. 硅酸盐学报,2003,31(2):143-147.
 
【14】LIU Hui-li,SHI Xun,XU Fang-fang,et al. Copper ion liquid-like thermoelectrics[J]. Nature Materials,2012,11:422-425.
 
【15】高敏, 张景韶, ROWE D M. 温差电转换及其应用[M]. 北京: 兵器工业出版社, 1996.
 
【16】刘恩科, 朱秉升, 罗晋生,等. 半导体物理学[M]. 西安:西安交通大学出版社, 2005.
 
【17】GB/T 4990-2010热电偶用补偿导线合金丝[S].
 
【18】田莳. 材料物理性能[M]. 北京: 北京航空航天大学出版社, 2008.
 
【19】谢华清, 奚同庚. 低维材料热物理[M]. 上海:上海科学技术文献出版社, 2008.
 
【20】倪育才. 实用不确定度评定[M]. 北京:中国计量出版社, 2010.
 
【21】STHVER U,MEAS S,TECHNOL. Measurement of the transport properties of FeSi2 and HMS by utilization of the Peltier effect in the temperature range 50-800 ℃[J]. Meas Sci Technol,1994,5:440.
 
【22】ULVAC-RIKO Inc. ULVAC-RIKO[EB/OL]. http://www.ulvac-riko.co.jp/chinese/index_chi.htm.
 
【23】LINSEIS. Linseis Thermal Analysis[EB/OL]. http://www.linseis.com.
 
【24】奚同庚. 无机材料热物性学[M]. 上海: 上海科学技术出版社, 1981.
 
【25】CAI An,XIE Hua-qing,XI Tong-geng,et al. Thermal diffusivity measurement of nano/micro-scale thin films by nano-second laser flash technique from -50 to 200 ℃[C]//Proceedings of The 8th Asian Thermophysical Property Conference,Fukuoka,Japan:[s.n.],2007:202.
 
【26】史迅. 一种非平衡状态下赛贝克系数的测量系统及其测量方法: 中国, 200410084659.6[P]. 2005-05-18.
 
【27】林国淙. 热电材料参数自动测定仪: 中国, 201010574245.7[P]. 2011-05-11.
 
【28】邓俊辉. 一种用于工业化生产热电材料的赛贝克系数测试装置: 中国, 201020506407.9[P]. 2011-06-01.
 
相关信息
   标题 相关频次
 热电材料电阻率测试的影响因素
 14
 激光剥蚀-电感耦合等离子体原子发射光谱法分析金属材料镀层
 6
 不同摆锤刀刃半径对室温冲击试验结果的影响
 4
 进口废金属固体废物属性鉴别标准与方法
 4
 两种测试纤维增强塑料冲压式剪切强度标准的对比
 4
 弩钩断裂失效分析
 4
 浅谈再制造用毛坯件的鉴定检测
 4
 完善中国再制造标准体系,助推绿色再制造产业发展
 3
 《儿童口罩技术规范》国家标准要义解析
 2
 1960-2020年中国X射线荧光光谱分析评述文献评介
 2
 AS2207—2007与GB/T11345—1989标准的比较与分析
 2
 ASTM G34-01(2013)剥落腐蚀试验标准的技术要点
 2
 GB/T 228.1—2010中最大力塑性延伸率测量新方法及其验证
 2
 GB/T 228.1—2021主要修改内容的对照与理解
 2
 GB/T 229-2007金属材料夏比摆锤冲击试验方法简介
 2
 GB/T 27664标准中3种时基线性测试方法的对比分析
 2
 GB/T 3323—2005与JB/T 4730.2—2005标准的对比解析
 2
 GB/T 3323—2005与JB/T 4730.2—2005射线检测标准对比分析
 2
 GB/T 37910.2-2019标准解析
 2
 GB/T11345-2013标准解析
 2
 GB/T11345新旧版的主要差异及探讨
 2
 GB/T29712-2013标准解析
 2
 ISO 17635:2010标准主要规定内容及其国内应用现状
 2
 JB/T4730.11射线数字成像标准制定的关键技术探讨
 2
 MSP方法评价PZT压电陶瓷的抗弯强度
 2
 NB/T47013-2015《承压设备无损检测》中工艺验证的实施方法
 2
 SA387GR.11CL.12钢单面焊对接接头的疲劳裂纹扩展性能评定
 2
 SEP1927-2010标准中灵敏度等级的解析和拓宽
 2
 SY/T 0327—2003《石油天然钢质管道对接环焊缝全自动超声波检测》编制说明
 2
 SY/T 4109-2005与JB/T 4730—2005射线检测标准对比分析
 2