Effect Test Factors on Brittleness Temperatures of Fluoroether Rubber
摘 要
按GB/T 1682-1994规定的方法测定了硫化压力、试样裁切方向对氟醚橡胶脆性温度的影响。结果表明:氟醚橡胶的脆性温度不仅与硫化压力有关, 而且与试样的裁切方向有关。一般情况下, 氟醚橡胶的脆性温度随着硫化压力的增大而略有上升, 其垂直压延方向的脆性温度比平行压延方向的脆性温度要低1~2 ℃,这说明氟醚橡胶具有压延效应。
Abstract
In accordance with the test method of GB/T 1682-1994, the brittleness temperatures of fluoroether rubber with different vulcanize pressures and cutting directions were tested. The results showed that the brittleness temperatures of fluoroether rubber were not only affected by vulcanize pressures, but also affected by cutting directions. Generally, the brittleness temperatures of fluoroether rubber increased with vulcanize pressures of specimens, and the brittleness temperatures of fluoroether rubber in the vertical calender direction were lower 1-2 ℃ than those parallel to the calender direction. It suggested that fluoroether rubber had been orientation induced.
中图分类号 TQ333.93
所属栏目 试验与研究
基金项目
收稿日期 2012/8/22
修改稿日期
网络出版日期
作者单位点击查看
备注程丽君(1978-),女,工程师,博士。
引用该论文: CHENG Li-jun,QIAN Huang-hai,WANG Zhen,SUN Xia-rong,ZHU Hua. Effect Test Factors on Brittleness Temperatures of Fluoroether Rubber[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2013, 49(3): 152~153
程丽君,钱黄海,王珍,孙霞容,朱华. 影响氟醚橡胶脆性温度的试验因素[J]. 理化检验-物理分册, 2013, 49(3): 152~153
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB/T 1682-1994硫化橡胶低温脆性的测定 单试样法测定[S].
【2】柳洪超,吴立军,尤瑜生,等. 氟醚橡胶的性能及其应用[J]. 化工新型材料,2007,35(4):11-12, 24.
【3】谢忠辟. 非轮胎橡胶制品用特色弹性体Ⅳ 四丙氟橡胶、氟醚橡胶和TPV[J]. 橡胶工业,2008,55(11): 689-697.
【2】柳洪超,吴立军,尤瑜生,等. 氟醚橡胶的性能及其应用[J]. 化工新型材料,2007,35(4):11-12, 24.
【3】谢忠辟. 非轮胎橡胶制品用特色弹性体Ⅳ 四丙氟橡胶、氟醚橡胶和TPV[J]. 橡胶工业,2008,55(11): 689-697.
相关信息