Fatigue Life of Aeronautical Perspex
摘 要
主要从疲劳S-N曲线、等寿命图两个方面研究了航空有机玻璃的疲劳寿命。研究结果表明: 由Goodman模型拟合的有机玻璃疲劳等寿命图不但本身具有很高的相关性系数, 同时能很好地预测某一寿命下材料的安全系数, 是拟合航空有机玻璃等寿命图的优选模型。Goodman模型等寿命图使试验人员很清楚地找到每一个点对应的σmax, σmin, σa, σm, R, N值, 节省了试验的时间和成本; 由已知的许用安全系数, 可以计算出任一工作点的安全系数和安全区, 为结构的设计提供依据。
Abstract
The fatigue life of aeronautical perspex was studied on the basis of the fatigue S-N curves and fatigue diagrams of constant life. The research results showed that the Goodman model of organic glass fatigue life diagram not only itself had a very high correlation coefficient, at the same time could well predict a life of material under the safety coefficient, was fitting aeronautical perspex and other life diagram model. Goodman model life made the test personnel clearly find every point corresponding to the σmax, σmin, σa, σm, R and N, so as to the test time and cost were saved; and the safety coefficient and safety zone of a working point could be calculated by the known allowable safety coefficient, which would provide a basis for structure design.
中图分类号 O346.2 TQ325.7
所属栏目 试验与研究
基金项目
收稿日期 2012/9/14
修改稿日期
网络出版日期
作者单位点击查看
备注马丽婷(1977-), 女, 工程师, 硕士。
引用该论文: MA Li-ting,CHEN Xin-wen,WANG Hai-peng,WANG Xiang,DENG Li-wei. Fatigue Life of Aeronautical Perspex[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2013, 49(5): 289~292
马丽婷,陈新文,王海鹏,王翔,邓立伟. 航空有机玻璃的疲劳寿命[J]. 理化检验-物理分册, 2013, 49(5): 289~292
被引情况:
【1】马丽婷,陈新文,王海鹏,邓立伟,王翔, "3238A/EW250F复合材料的弯曲疲劳性能",理化检验-物理分册 51, 399-401(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】马丽婷, 陈新文, 苏彬.航空有机玻璃的研究进展[J].材料工程, 2004(8): 57.
【2】董月香, 高增梁.疲劳寿命预测方法综述[J].大型铸锻件, 2006(3): 40-42.
【3】马丽婷, 陈新文, 厉蕾.航空有机玻璃的疲劳行为研究[J].失效分析与预防, 2010(1): 27-28.
【4】张萃, 张建宇, 王佳莹, 等.某型飞机新旧座舱盖有机玻璃的疲劳性能研究[J].飞机设计, 2009, 29(6): 29-31.
【5】赵少汴, 王忠宝.抗疲劳设计——方法与数据[M].北京: 机械工业出版社, 1997: 11.
【2】董月香, 高增梁.疲劳寿命预测方法综述[J].大型铸锻件, 2006(3): 40-42.
【3】马丽婷, 陈新文, 厉蕾.航空有机玻璃的疲劳行为研究[J].失效分析与预防, 2010(1): 27-28.
【4】张萃, 张建宇, 王佳莹, 等.某型飞机新旧座舱盖有机玻璃的疲劳性能研究[J].飞机设计, 2009, 29(6): 29-31.
【5】赵少汴, 王忠宝.抗疲劳设计——方法与数据[M].北京: 机械工业出版社, 1997: 11.
相关信息