Influence of Test Method Deviated from Standard Requirements on Strength Experiment Results of Ceramic Tile
摘 要
少数检测人员在陶瓷砖强度试验中未严格按照标准要求进行试验, 主要表现在3个方面: 试验时试样的前处理未干燥至恒重; 试验时试样的放置不正确; 断裂面厚度测量不正确。通过和标准测试方法的比对研究, 分析讨论了这些不正确的做法对陶瓷砖强度试验结果的影响。上述研究有助于检测人员更好地找到产品质量检测数据不准确的原因, 从而采用正确的试验方法, 更好地认识和改进产品的质量。
Abstract
A few testers do not keep in strict accordance with the standard requirements for strength experiment on ceramic tile, mainly exist three kinds of deviations from the standard as follows: the sample pretreatment doesn′t dry to constant weight; the sample was not placed correctly in testing; the thickness of fracture surface was not measured correctly. Through the comparison research of the deviated test methods and the standard methods, the influence of three kinds of the test method deviated from standard requirements on strength experiment results of ceramic tile was analyzed. The above research will help the testers to find the reason of inaccurate test data, then use the correct test method, and improve the product quality.
中图分类号 TQ174.76+5
所属栏目 试验技术与方法
基金项目
收稿日期 2013/1/4
修改稿日期
网络出版日期
作者单位点击查看
备注邱凌(1973-), 男, 工程师, 工学学士。
引用该论文: QIU Ling,LIU Wei,LIN Zong-hua,CHEN Xiong,CHEN Chang-hong. Influence of Test Method Deviated from Standard Requirements on Strength Experiment Results of Ceramic Tile[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2013, 49(11): 739~740
邱凌,刘伟,林宗华,陈雄,陈长虹. 检测方法偏离标准要求对陶瓷砖强度试验结果的影响[J]. 理化检验-物理分册, 2013, 49(11): 739~740
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB/T 4100-2006陶瓷砖[S].
【2】GB/T 3810.4-2006陶瓷砖试验方法 第4部分:断裂模数和破坏强度的测定[S].
【2】GB/T 3810.4-2006陶瓷砖试验方法 第4部分:断裂模数和破坏强度的测定[S].
相关信息