Causes Analysis on Bursting of T92Steel Tube of Finishing Superheater in Ultra Supercritical Boiler
摘 要
通过宏观检查、化学成分分析、金相检验及力学性能测试等方法,对某电厂超超临界锅炉末级过热器 T92钢管爆管原因进行了分析。结果表明:爆管是由管子内壁局部位置少量氧化皮脱落引起的长时过热导致的,并针对爆管原因提出了预防措施。
Abstract
By means of visual observation,chemical compositions analysis,metallographic examination andmechanical properties testing,the bursting causes for T92steel tube of finishing superheater in ultra supercriticalboiler were analyzed.The results show that the tube-bursting was due to long term overheat,as a result of a littleoxide skin peeling-off from the local position of inner wall of the tube.Preventive measures were proposed in view ofthe bursting reasons.
中图分类号 TG146.1+5
所属栏目 质量控制与失效分析
基金项目
收稿日期 2013/9/3
修改稿日期
网络出版日期
作者单位点击查看
备注马元坤(1965-),男,高级工程师,学士。
引用该论文: MA Yuan-kun. Causes Analysis on Bursting of T92Steel Tube of Finishing Superheater in Ultra Supercritical Boiler[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2013, 49(12): 834~837
马元坤. 超超临界锅炉末级过热器T92钢管爆管原因分析[J]. 理化检验-物理分册, 2013, 49(12): 834~837
被引情况:
【1】齐向前, "不同热处理状态下P92钢里氏硬度值与布氏硬度值的对比",理化检验-物理分册 51, 612-614(2015)
【2】冯庆,于辉,刘波,李栋,刘帅帅, "连铸坯表面缺陷对连轧钢管表面质量的影响",理化检验-物理分册 51, 679-683(2015)
【3】卢忠铭,倪进飞,张辉,刘课秀,梁自生, "锅炉SNCR脱硝水冷壁管泄漏失效分析",理化检验-物理分册 50, 907-910(2014)
【4】董登超,张珂,洪慧敏,顾锋, "某电厂锅炉用12Cr1MoVG钢过热器管爆管的原因",机械工程材料 40, 114-118(2016)
【5】缪春辉,汤 泉,张 涛,陈国宏, "某火力发电厂水冷蒸发屏管泄漏原因分析及处理",理化检验-物理分册 52, 574-577(2016)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】ASME SA-213/SA-213M-2010 Specification forseamless ferritic and austenitic alloy-steel boiler super-heater and heat-exchanger tubes[S].
【2】DL/T 884-2004 火电厂金相检验与评定技术导则[S].
【3】GB/T 228.1-2010 金属材料 拉伸试验 第1部分:室温试验方法[S].
【4】GB/T 4340.1-2009 金属材料 维氏硬度试验 第1部分:试验方法[S].
【5】DL/T 438-2009 火力发电厂金属技术监督规程[S].
【6】EN ISO 18265-2003 Metallic materials conversionof hardness values[S].
【7】孟卫疆,余跃江,郑坊平,等.高温过热器G102管内壁氧化皮剥落导致的爆管原因分析及对策[J]. 理化检验-物理分册,2012,48(9):613-621.
【2】DL/T 884-2004 火电厂金相检验与评定技术导则[S].
【3】GB/T 228.1-2010 金属材料 拉伸试验 第1部分:室温试验方法[S].
【4】GB/T 4340.1-2009 金属材料 维氏硬度试验 第1部分:试验方法[S].
【5】DL/T 438-2009 火力发电厂金属技术监督规程[S].
【6】EN ISO 18265-2003 Metallic materials conversionof hardness values[S].
【7】孟卫疆,余跃江,郑坊平,等.高温过热器G102管内壁氧化皮剥落导致的爆管原因分析及对策[J]. 理化检验-物理分册,2012,48(9):613-621.
相关信息
标题 | 相关频次 | |
12Cr1MoVG钢屏式再热器爆管原因 | 1 | |
300 MW亚临界机组锅炉屏式过热器管爆裂原因分析 | 1 |