Design and Testing for Orbit-Holding Traveling Mechanism of Girth Weld Ultrasonic Scanning Equipment
摘 要
设计了环焊缝超声波扫查器导轨夹持行走机构。该行走机构采用带有凸缘的从动轮夹紧导轨,由类齿形主动轮与导轨啮合,驱动扫查器行走。为验证该行走机构的可靠性,设计并完成了与其原理完全一致的原理验证样机,同时进行了模拟扫查器沿环形导轨行走试验。试验表明,当自重24 kg对其施加600 N夹紧力时,行走机构能够可靠地沿环形导轨圆周运动。该行走机构原理验证样机为后续扫查器行走方案提供了可靠的依据。
Abstract
An orbit-holding traveling mechanism of girth weld ultrasonic scanning equipment was designed in this paper. It held the orbit by engaged wheels with flange and drove the scanning equipment by a tooth-shaped driving wheel engaging with the orbit. In order to verify the reliability of this traveling mechanism, a prototype which works in the same way as the orbit-holding traveling mechanism was manufactured in this paper. And the experiment simulated the scanning equipment traveling along a orbit was completed, which showed that the traveling mechanism could travel along an orbit reliably when it weighed 24 kg and was exerted a 600N force. The prototype of traveling mechanism provided reliable evidence for the later traveling plan of scanning equipment.
中图分类号 TG115.28
所属栏目 仪器研制
基金项目 国家十一五863计划“深水海管水下回接技术及AUT检验设备国产化技术研究”资助项目(2006AA09A105-4)
收稿日期 2010/6/4
修改稿日期
网络出版日期
作者单位点击查看
备注马保家(1963-),男,高级工程师,工学学士,长期从事海洋石油开发工程机械研究。
引用该论文: MA Bao-Jia,MA Hong-Wen,CAO Wei,LI Kai,WANG Li-Quan. Design and Testing for Orbit-Holding Traveling Mechanism of Girth Weld Ultrasonic Scanning Equipment[J]. Nondestructive Testing, 2011, 33(3): 52~54
马保家,马洪文,曹为,李凯,王立权. 环焊缝超声扫查器导轨夹持行走机构设计与验证[J]. 无损检测, 2011, 33(3): 52~54
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】韩烨,刘觉非,彭杰.全自动超声波检测应用[J].石油化工设备,2007,36(4):70-72.
【2】刘志远,裴润,王玲.一种焊缝缺陷自动超声检测系统[J].焊接学报,2002,23(3):71-74.
【3】张旭辉.管道对接焊缝自动超声检测系统的研制[D].西安:西安科技学院,2002.
【4】张燕宏.焊缝自动超声检验技术与设备的试验研究[D].合肥:合肥工业大学,2005.
【5】曹健.全自动相控阵超声检测技术在环焊缝检测中的应用[J].无损检测,2003,25(4):201-203.
【6】韩相勇.长输管线对接环焊缝自动相控阵超声波检测技术[J].无损检测,2006,28(5):237-241.
【2】刘志远,裴润,王玲.一种焊缝缺陷自动超声检测系统[J].焊接学报,2002,23(3):71-74.
【3】张旭辉.管道对接焊缝自动超声检测系统的研制[D].西安:西安科技学院,2002.
【4】张燕宏.焊缝自动超声检验技术与设备的试验研究[D].合肥:合肥工业大学,2005.
【5】曹健.全自动相控阵超声检测技术在环焊缝检测中的应用[J].无损检测,2003,25(4):201-203.
【6】韩相勇.长输管线对接环焊缝自动相控阵超声波检测技术[J].无损检测,2006,28(5):237-241.
相关信息