Ultrasonic Phased Array Inspection of Butt Weld Spiral on the Tongue Board of the Hydropower Station
摘 要
为了更好地控制水电站蜗壳舌板焊缝的检验质量,现场采用超声相控阵检测方法。针对该类工件的结构特点,采用区域划分法,将焊缝分成垂直方向上的若干个区,再由电子系统控制相控降探头对其进行分区扫查。在现场共检出四处超标缺陷,与解剖结果基本一致。试验结果表明,相控阵方法检测速度快、灵活性好、准确性高,检测自动记录图所提供的缺陷三向视图使得检测结果更为直观,可在厚壁工件焊缝上推广应用。
Abstract
In order to better control the quality of inspection on tongue weld spiral plate hydropower station, the in-site ultrasonic phased array inspection was employed. According to the structure characteristics of such workpiece, the welds are divided into several areas in vertical direction by using zone partition method. Then the areas are scanned by the phased probe controlled by electronic systems. Four defects were detected with signals being exceeding the threshold, consistent with the anatomical results. This method is fast, good flexibility and high accuracy. The three-dimensional view on defect that provided by the automatic recording diagram of the test results, made the results more intuitive. This method is worth popularizing into the thick workpiece weld application.
中图分类号 TG115.28
所属栏目 试验研究
基金项目
收稿日期 2011/4/2
修改稿日期
网络出版日期
作者单位点击查看
备注李玉军(1967-),男,高工,大学本科,主要从事承压类特种设备检验及检测工作。
引用该论文: LI Yu-Jun,XUE Yong-Sheng,HAN Zhi-Gang. Ultrasonic Phased Array Inspection of Butt Weld Spiral on the Tongue Board of the Hydropower Station[J]. Nondestructive Testing, 2011, 33(8): 27~30
李玉军,薛永盛,韩志刚. 水电站蜗壳舌板对接焊缝的超声波相控阵检测[J]. 无损检测, 2011, 33(8): 27~30
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李衍.钢焊缝相控阵超声波探伤新技术[J].无损探伤,2002(3):1-5.
【2】郑中兴.天然气长输管道对接环焊缝相控阵超声波全自动检测系统[J].无损探伤,2002(4):29-30.
【3】钟志民,梅德松.超声相控阵技术的发展及应用.无损检测,2002,(2):69-71.
【2】郑中兴.天然气长输管道对接环焊缝相控阵超声波全自动检测系统[J].无损探伤,2002(4):29-30.
【3】钟志民,梅德松.超声相控阵技术的发展及应用.无损检测,2002,(2):69-71.
相关信息