Ultrasonic Testing for Spheroidal Graphite Cast Iron in Wind Power
摘 要
风力发电机组中球墨铸铁得到大量的使用。球墨铸铁的无损检测一般采用超声波检测和磁粉检测,国外风电企业都有严格的球墨铸铁检测规程,随着国内对球墨铸铁检测的重视程度不断提高,球墨铸铁检测的风力发电行业规范也颁布实施。介绍了球墨铸铁的超声波检测特点,以及国外风电企业对球墨铸铁超声波检测的规程,最后介绍风电典型球墨铸铁结构的超声波检测方法。
Abstract
Spheroidal graphite cast iron is used widely in wind power now, the nondestructive testing for this material mainly to use magnetic particle testing and ultrasonic testing. Foreign wind power companies have strict testing procedures for spheroidal graphite cast iron. With the increasing demand for product quality in China, the nondestructive testing standard for spheroidal graphite cast iron in wind power will be released soon. This paper firstly explains the characteristic of ultrasonic testing for spheroidal graphite cast iron, then introduces the ultrasonic testing procedure of foreign wind power company, and finally some typical ultrasonic testing methods for wind power spheroidal graphite cast iron are recommended.
中图分类号 TG115.28
所属栏目 实践经验
基金项目
收稿日期 2011/10/28
修改稿日期
网络出版日期
作者单位点击查看
备注谷柱(1983-),男,硕士研究生,工程师,研究方向为常规超声、TOFD及相控阵技术的原理及应用,负责GE检测科技便携式超声波探伤设备技术支持。
引用该论文: GU Zhu,CAI Yu-Dong. Ultrasonic Testing for Spheroidal Graphite Cast Iron in Wind Power[J]. Nondestructive Testing, 2012, 34(5): 73~75
谷柱,柴玉东. 风力发电机组球墨铸铁件的超声波检测[J]. 无损检测, 2012, 34(5): 73~75
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】沈功田,李丽菲,王珊珊.铸铁设备无损检测技术进展[C].全国第九届无损检测学术年会,上海:2010.
【2】EN 12680-3Founding-Ultrasonic Examination-Part 3: Spheroidal Graphite Cast Iron Castings[S].
【3】GB/T 25390—2010风力发电机组球墨铸铁件[S].
【2】EN 12680-3Founding-Ultrasonic Examination-Part 3: Spheroidal Graphite Cast Iron Castings[S].
【3】GB/T 25390—2010风力发电机组球墨铸铁件[S].
相关信息