Experiment of Acoustic Emission(AE) Testing of Blowout Preventer in Pressured Process
摘 要
用声发射检测方法对带有裂纹缺陷的防喷器壳体在承压过程中裂纹扩展的过程进行检测。在一个已报废防喷器壳体上用气焊切割一个长100 mm、宽5 mm的缺口,再将缺口补焊。采用气动泵对防喷器加压,对防喷器的承压过程进行了检测。检测结果显示,用声发射检测能够及时有效地反映出被测防喷器在外力作用下缺陷的活动情况,其检测结果能反映防喷器壳体在承压过程中的破坏情况,且对缺陷的定位准确。
Abstract
In this paper, a blowout preventer shell with crack was tested when it was pressurized by using acoustic emission(AE) technique. A notch of 100 mm long and 5 mm wide was cut in a scraped bop shell, and then it was welded and pressurized with pneumatic pumps. We tested the bop shell during pressurizing, the result showed that the AE technique could reflect the activities of the defects timely and effectively, and the damage situation of the blowout preventer shell in the pressured process and the location was accurate.
中图分类号 TG115.28
所属栏目 试验研究
基金项目 黑龙江省教育厅科学技术研究资助项目(1251108)
收稿日期 2011/8/30
修改稿日期
网络出版日期
作者单位点击查看
备注赵俊茹(1979-),女,讲师,博士研究生,主要从事声发射检测与风险评估方面的工作。
引用该论文: ZHAO Jun-Ru,DAI Guang,LONG Fei-Fei. Experiment of Acoustic Emission(AE) Testing of Blowout Preventer in Pressured Process[J]. Nondestructive Testing, 2012, 34(9): 37~38
赵俊茹,戴光,龙飞飞. 防喷器在承压过程中的声发射检测[J]. 无损检测, 2012, 34(9): 37~38
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】邓勇刚,林发权,张利红,等.AET技术在油田防喷器检测中的应用[J].钻采工艺,2009,32(3):83-85.
【2】朱祥军,吴怡.环形防喷器的声发射检测[J].无损检测,2009,30(6):359-362.
【2】朱祥军,吴怡.环形防喷器的声发射检测[J].无损检测,2009,30(6):359-362.
相关信息