Research on Automatic Rating Method for Digital Image Circular Weld Defects
摘 要
针对圆形缺陷数量已知且需对焊缝缺陷进行评级,采用Visual C++面向对象设计原理,对JB/T 4730.2—2005中钢、镍、铜制承压设备熔化焊对接焊焊接接头质量分级中的圆形缺陷等级评定标准进行程序设计。建立单文档应用程序,插入对话框菜单,在对话框中添加下压按钮控件函数、编辑框控件函数和成组框函数,将设计的程序进行调试和编译,生成了可视化界面。输入母材公称厚度和圆形缺陷数量两个变量,系统可自动评定圆形缺陷的等级。试验结果表明,该自动评级程序设计合理,运算结果准确。
Abstract
Aiming at the defects of known number and the requirement for weld defect ratings, the design of a program was proposed to use Windows application design principle for JB/T 4730.2—2005 steel, nickel, and copper melt pressure equipment welding butt welding joint for the purpose of classification of round defect levels evaluation criteria. Through establishing the application documents, inserting a dialog box in the menu, pressing the button control add function, editing box control function and group box function, and followed by the procedure of debugging and compiling, it shall generate a visual interface. By inputting the mother material nominal thickness and round number two variables, the defect evaluation system shall automatically show you the level of defects. The experimental results show that the automatic rating program design is reasonable, the operation result is accurate.
中图分类号 TG115.28
所属栏目 试验研究
基金项目 甘肃省教育厅研究生导师基金资助项目(1001ZTC086);兰州理工大学博士基金资助项目(0901ZXC112)
收稿日期 2011/9/14
修改稿日期
网络出版日期
作者单位点击查看
备注汪孝欢(1985-),男,硕士研究生,主要从事X射线实时成像系统研究。
引用该论文: WANG Xiao-Huan,NIU Xian-Ming,ZHANG Peng-Lin,JIAN Chun-Guang. Research on Automatic Rating Method for Digital Image Circular Weld Defects[J]. Nondestructive Testing, 2012, 34(9): 42~45
汪孝欢,牛显明,张鹏林,渐春光. 焊缝数字图像圆形缺陷的自动评级方法[J]. 无损检测, 2012, 34(9): 42~45
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张晓光,刘金德,林家骏,等.射线焊缝缺陷识别的专家系统[J].矿山机械,2001(11):3.
【2】JB/T 4730.2—2005承压设备熔化焊对接焊接接头射线检测质量分级[S].
【3】张国峰. Windows应用程序设计 原理、方法和技巧[M].北京:电子工业出版社,1994:387-386.
【2】JB/T 4730.2—2005承压设备熔化焊对接焊接接头射线检测质量分级[S].
【3】张国峰. Windows应用程序设计 原理、方法和技巧[M].北京:电子工业出版社,1994:387-386.
相关信息