关于ENIQ验证方法的若干问题
The Discussion of Methodologies for Qualification of In-service Inspection
摘 要
以ENIQ验证方法为对象，对其进行了简单的介绍，并就ENIQ方法在具体实施过程中验证要求和形式的确定、验证活动的组织和管理以及验证试块中缺陷的代表性等问题进行了讨论，并结合法国的在役检查技术验证经验，对我国的在役检查技术验证提出了建议。
ENIQ
技术论证
验证缺陷
Qualification of in-service inspection
ENIQ
Technical justification
Qualification defects
Abstract
Based on ENIQ methodology, the qualification requirements, the organization of qualification activities and the representative simulations of qualification defects were discussed. Then the qualification approach of in-service inspection in China was discussed in accordance with the experience of French methodology approach.
中图分类号 TG115.28
所属栏目 综述
基金项目
收稿日期 2012/2/19
修改稿日期
网络出版日期
作者单位点击查看
备注齐敦杰(1984-)，男，助理工程师，硕士，从事核电厂的在役检查工作。
引用该论文: QI Dun-Jie,GUO Liang,BAI Qing-Shan. The Discussion of Methodologies for Qualification of In-service Inspection[J]. Nondestructive Testing, 2012, 34(12): 50～53
齐敦杰,郭亮,白青山. 关于ENIQ验证方法的若干问题[J]. 无损检测, 2012, 34(12): 50～53
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】ASMEBoiler and Pressure Vessel Code, Section XI. Rules for In Service Inspection of Nuclear Power Plant Components,2007 Edition［S］.
【2】EUR22906ENEuropean Methodology for Qualification of Non-destructive Testing［S］.
【3】EUR18100ENENIQ Recommended Practice3: Strategy Document for Technical Justification［S］.
【4】EUR18099ENENIQ Recommended Practice 2: Recommended Contents for a Technical Justification［S］.
【5】EUR21751ENENIQ Recommended Practice 1: Influential/Essential Parameters［S］.
【6】NEA/CSNI/R(2005)3Review of International Developments and Cooperation on Risk-Informed In-Service-Inspection and Non-destructive Testing(NDT). Qualification in OECD-NEA Member Countries Responses to the Questionnaire［S］.
【7】EUR2039ENENIQ Recommended Practice 7, Recommended General Requirements for a Body Operating Qualification of Non-Destructive Tests［S］.
【8】EUR18686ENENIQ Recommended Practice 5, Guidelines for the Design of Test Pieces and Conduct of Test Piece Trials［S］.
【9】Hnninen H. Hakala J. Pipe failure caused by thermal loading in BWR water conditions［J］. International Journal of Pressure Vessels and Piping, 2002,9:445.
【10】Birac C, Jouhanneau D, Salin J. Requirements-Qualification contributions to safety［J］. ECNDT,2006(141):1-10.
【11】RSEMCode Surveillance and in Service Inspection Rules for Mechanical Components of PWR Nuclear Islands, 1997 Edition［S］.
【2】EUR22906ENEuropean Methodology for Qualification of Non-destructive Testing［S］.
【3】EUR18100ENENIQ Recommended Practice3: Strategy Document for Technical Justification［S］.
【4】EUR18099ENENIQ Recommended Practice 2: Recommended Contents for a Technical Justification［S］.
【5】EUR21751ENENIQ Recommended Practice 1: Influential/Essential Parameters［S］.
【6】NEA/CSNI/R(2005)3Review of International Developments and Cooperation on Risk-Informed In-Service-Inspection and Non-destructive Testing(NDT). Qualification in OECD-NEA Member Countries Responses to the Questionnaire［S］.
【7】EUR2039ENENIQ Recommended Practice 7, Recommended General Requirements for a Body Operating Qualification of Non-Destructive Tests［S］.
【8】EUR18686ENENIQ Recommended Practice 5, Guidelines for the Design of Test Pieces and Conduct of Test Piece Trials［S］.
【9】Hnninen H. Hakala J. Pipe failure caused by thermal loading in BWR water conditions［J］. International Journal of Pressure Vessels and Piping, 2002,9:445.
【10】Birac C, Jouhanneau D, Salin J. Requirements-Qualification contributions to safety［J］. ECNDT,2006(141):1-10.
【11】RSEMCode Surveillance and in Service Inspection Rules for Mechanical Components of PWR Nuclear Islands, 1997 Edition［S］.
相关信息
