Application of Steel Block in Ultrasonic Inspection of Butt Welds Seam
摘 要
为保证焊缝超声波检测结果的准确性、 可比性、重复性,利用钢试块测试调整仪器,结合相关理论计算,通过对反射体定位、灵敏度校准及对反射体当量进行修正,利用其修正结果能够确定检测灵敏度,评价缺陷的当量大小,完成对钛、铝焊缝的超声波探伤。经过模拟试验和现场检测,证明该种检测方法准确,可靠,有较高的实用价值。
Abstract
In order to ensure the accuracy of the test results, comparability and repeatability, steel block testing and adjusting apparatus, combined with theoretical calculation, was used for the reflector positioning, sensitivity calibration and correction of the reflector equivalent. Ultrasonic inspection of welded joints in aluminum and titanium was performed by using the corrected results to determine the sensitivity of detection and to evaluate defect equivalent size. The simulation test and field test proved that the detection method was accurate, reliable, and of high practical value.
中图分类号 TG115.28
所属栏目 实践经验
基金项目
收稿日期 2012/11/24
修改稿日期
网络出版日期
作者单位点击查看
备注孟庆波(1975-),男,无损检测责任师,主要从事无损检测工作。
引用该论文: MENG Qing-Bo. Application of Steel Block in Ultrasonic Inspection of Butt Welds Seam[J]. Nondestructive Testing, 2013, 35(2): 64~66
孟庆波. 钢试块在对接焊缝超声波探伤中的应用[J]. 无损检测, 2013, 35(2): 64~66
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】郑晖,林树青.超声检测[M].北京:中国劳动社会保障出版社,2008.
【2】JB/T 4730.3—2005承压设备无损检测第3部分超声检测[S].
【2】JB/T 4730.3—2005承压设备无损检测第3部分超声检测[S].
相关信息