The Analysis of Interface Echo of Ultrasonic Testing of Stainless Steel Heterogeneous Seam
摘 要
对不锈钢与碳钢的闪光焊焊缝进行常规超声波检测时,会出现明显的异质界面回波,易导致难以区分异质界面产生的反射信号和异质界面处缺陷产生的信号,严重影响对缺陷的识别。通过使用超声波测试异质界面的声压反射率,分析了异质界面反射波形成原因。
Abstract
Ultrasonic testing is a common method for welds. There is obvious heterogeneous interface echo of the conventional ultrasonic testing for stainless steel-ordinary carbon steel flash welding, which will seriously affect the defect recognition because it is difficult to distinguish the defect signal in the heterogeneous interface ones. In this paper, sound pressure reflection coefficient of the heterogeneous interface is tested, aiming to illuminate the reason of existence of the reflection echo.
中图分类号 TG115.28
所属栏目 试验研究
基金项目
收稿日期 2012/9/17
修改稿日期
网络出版日期
作者单位点击查看
备注高东海(1980-),男,助理研究员,主要从事铁路零部件无损检测技术、工艺、方法研究及设备研发。
引用该论文: GAO Dong-Hai,FAN Zhen-Zhong,HUANG Feng-Ying,GUO Ben,SHI Qi-Shuai. The Analysis of Interface Echo of Ultrasonic Testing of Stainless Steel Heterogeneous Seam[J]. Nondestructive Testing, 2013, 35(7): 13~15
高东海,范振中,黄凤英,郭犇,史启帅. 不锈钢异质焊缝超声探伤界面回波的分析[J]. 无损检测, 2013, 35(7): 13~15
被引情况:
【1】孟贵云,张世宏,陈振华,李新蕾,王宏, "超声TOFD检测声波在不锈钢焊缝中的传播特性及其应用",无损检测 37, 51-56(2015)
【2】彭国平,陈振华,叶伟文,卢 超, "基于合成孔径聚焦的不锈钢焊缝超声TOFD检测技术",无损检测 38, 40-45(2016)
【3】李建忠,刘国奇,陈振华,金焓,欧利江, "基于小波包分解的不锈钢焊缝超声TOFD检测信号及缺陷信号提取",无损检测 37, 38-41(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】TB/T 2658.21-2007 工务作业 第21部分:钢轨焊缝超声波探伤作业[S].
【2】中国机械工程学会无损检测分会编.超声检测[M].北京:机械工业出版社,2000.
【2】中国机械工程学会无损检测分会编.超声检测[M].北京:机械工业出版社,2000.
相关信息