国内外核电站在役检查能力验证发展
The Development of In-Service Inspection Qulification in the Worldwide Nuclear Power Plants
摘 要
介绍了核电站在役检查能力验证的ASME验证的方法和ENIQ验证方法体系。分析了两种方法各自的特点以及两种方法体系在世界范围内的应用。最后介绍了国内在役检查能力验证的状况，并对国内的验证工作提出了建议。
核电站
在役检查
ASME验证方法
ENIQ验证方法
Qualification
Nuclear power plant
In-service inspection
ASME qualification method
ENIQ qualification methodology
Abstract
The history of in-service inspection qualification in the worldwide nuclear power plants was described. The characteristics and applications of two methods both ASME qualification and ENIQ qualification methodology were analysed. Finally, the status of in-service inspection qualification in China was introduced and the domestic qualification work in future was also suggested.
中图分类号 TG115.28
所属栏目 2013远东无损检测新技术论坛论文精选
基金项目
收稿日期 2013/6/17
修改稿日期
网络出版日期
作者单位点击查看
备注徐清国(1968-)，男，山东青州人，本科，主要从事核电站承压设备无损检测研究。
引用该论文: XU Qing-Guo,CHEN Huai-Dong,MA Guan-Bing,LI Ming,XIAO Xue-Zhu,YUAN Shu-Xian. The Development of In-Service Inspection Qulification in the Worldwide Nuclear Power Plants[J]. Nondestructive Testing, 2013, 35(10): 38～44
徐清国,陈怀东,马官兵,李明,肖学柱,袁书现. 国内外核电站在役检查能力验证发展[J]. 无损检测, 2013, 35(10): 38～44
被引情况:
【1】马官兵,袁书现,徐清国,李明,王韦强, "超声仿真技术和激光超声波可视化技术在核反应堆压力容器安全端窄间隙焊缝超声波检测能力验证中的应用",无损检测 37, 8-14(2015)
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】ASME Boiler and Pressure Vessel Code, Section XI.Rules for In Service Inspection of Nuclear Power Plant Components. Mandatory Appendix Ⅷ-Performance Demonstration for Ultrasonic Examination Systems［S］.2010.
【2】EDMUD J, ROBERT A, DAVID TERAO, et al. U.S. nuclear regulatory commission perspective on performance demonstration of ultrasonic testing systems［C］. The Netherlands: Institute for Advanced Materials,1997:44-46.
【3】TOSHIHIKO S, TAMOTSU J, KOICHIRO H. Progress of performance demonstration in Japan［J］.E-Journal of Advanced Maintenance,2009(1):64-67.
【4】YONGSILK K, BYUNGSIL Y, SEUNGHAN Y. Current status of ultrasonic examination performance demonstration in Korea［J］.E-Journal of Advanced Maintenance,2013(4):133-141.
【5】CHAPMAN B, SELDIS T, ERIKSSON A. European methodology for qualification of Non-destructive testing［R］. Luxemburg: Office for Official Publications of the European Communities, 2007.
【6】ENIQ Recommended Practice 1: Influential/Essential Parameters［R］.ENIQ Report nr. 24, EUR21751EN. 2005.
【7】LEMAITRE P. ENIQ Recommended Practice 2, Recommended Contents for a Technical Justification［R］. Luxemburg: Office for Official Publications of the European Communities, 1998.
【8】ENIQ Recommended Practice 7, Recommended General Requirements for a Body Operating Qualification Of Non-Destructive Tests［R］. Luxemburg:Office for Official Publications of the European Communities, 2002.
【9】CHAPMAN R, CHAPMAN V, ERIKSSON A, et al. ENIQ Recommended Practice 8, Qualification Levels and Qualification Approaches［R］. Luxemburg:Office for Official Publications of the European Communities, 2005.
【10】LEMAITRE P. ENIQ Recommended Practice 5, Guidelines for the Design of Test Pieces and Conduct of Test Piece Trials［R］. Luxemburg: Office for Official Publications of the European Communities, 1999.
【11】JARDET P, MENAND R. Feedback from 10 years of NDE Qualification from the EDF QualificationBody［C］.Berlin:Proceedings of the 8th International Conference on NDE in Relation to Structural Integrity forNuclear and Pressurised Components.2010.
【12】TOMMY Z. Inspection qualification and implementation of ENIQ in Sweden［J］.E-Journal of Advanced Maintenance, 2013(4):116-124.
【13】ASME Boiler and Pressure Vessel Code, Section V. Non-destructive examination, 2010 Edition, Mandatory Appendix V. Article 14- Examination System Qualification ［S］.
【14】Jinhong L, Zhongyuan L, Huaidong C, et al. Practice on NDE licensing and inspection qualifications for nuclear power plant in-service inspections［C］.Duban, South Africa:18th World Conference on Nondestructive Testing,2012.
【2】EDMUD J, ROBERT A, DAVID TERAO, et al. U.S. nuclear regulatory commission perspective on performance demonstration of ultrasonic testing systems［C］. The Netherlands: Institute for Advanced Materials,1997:44-46.
【3】TOSHIHIKO S, TAMOTSU J, KOICHIRO H. Progress of performance demonstration in Japan［J］.E-Journal of Advanced Maintenance,2009(1):64-67.
【4】YONGSILK K, BYUNGSIL Y, SEUNGHAN Y. Current status of ultrasonic examination performance demonstration in Korea［J］.E-Journal of Advanced Maintenance,2013(4):133-141.
【5】CHAPMAN B, SELDIS T, ERIKSSON A. European methodology for qualification of Non-destructive testing［R］. Luxemburg: Office for Official Publications of the European Communities, 2007.
【6】ENIQ Recommended Practice 1: Influential/Essential Parameters［R］.ENIQ Report nr. 24, EUR21751EN. 2005.
【7】LEMAITRE P. ENIQ Recommended Practice 2, Recommended Contents for a Technical Justification［R］. Luxemburg: Office for Official Publications of the European Communities, 1998.
【8】ENIQ Recommended Practice 7, Recommended General Requirements for a Body Operating Qualification Of Non-Destructive Tests［R］. Luxemburg:Office for Official Publications of the European Communities, 2002.
【9】CHAPMAN R, CHAPMAN V, ERIKSSON A, et al. ENIQ Recommended Practice 8, Qualification Levels and Qualification Approaches［R］. Luxemburg:Office for Official Publications of the European Communities, 2005.
【10】LEMAITRE P. ENIQ Recommended Practice 5, Guidelines for the Design of Test Pieces and Conduct of Test Piece Trials［R］. Luxemburg: Office for Official Publications of the European Communities, 1999.
【11】JARDET P, MENAND R. Feedback from 10 years of NDE Qualification from the EDF QualificationBody［C］.Berlin:Proceedings of the 8th International Conference on NDE in Relation to Structural Integrity forNuclear and Pressurised Components.2010.
【12】TOMMY Z. Inspection qualification and implementation of ENIQ in Sweden［J］.E-Journal of Advanced Maintenance, 2013(4):116-124.
【13】ASME Boiler and Pressure Vessel Code, Section V. Non-destructive examination, 2010 Edition, Mandatory Appendix V. Article 14- Examination System Qualification ［S］.
【14】Jinhong L, Zhongyuan L, Huaidong C, et al. Practice on NDE licensing and inspection qualifications for nuclear power plant in-service inspections［C］.Duban, South Africa:18th World Conference on Nondestructive Testing,2012.
相关信息
