RPV Inspection Equipment Support Legs Design and Reliability Study
摘 要
反应堆压力容器检查机的支撑腿结构起定位和支撑作用,其结构的合理性对反应堆压力容器检查机的定位精度和可靠性具有重要影响。针对第三代核电站EPR堆型核反应堆压力容器结构,设计了具有自动定心功能的支撑腿结构。采用有限元方法分析了支撑腿结构的可靠性,并进行了验证力学试验。试验结果印证了相关理论分析结果,证明该支撑腿结构的设计是合理可行的。
Abstract
The support legs are the positioning and support functional components of the Reactor pressure vessel inspection equipment (EPR CIME). The rationality of the structure has important influence on the positioning accuracy and reliability of EPR CIME. According to EPR nuclear reactor pressure vessel structure of the third generation nuclear power plants, the support legs were designed with the function of automatic centering, and the reliability of the support legs was analyzed by using ANSYS method, then a mechanics experiment was carried out. Mechanics experiment verified the theoretical analysis results, and proved that the design of support legs were reasonable and feasible.
中图分类号 TG115.28
所属栏目 2013远东无损检测新技术论坛论文精选
基金项目 国家高技术研究发展计划资助项目(2011AA040200)
收稿日期 2013/6/17
修改稿日期
网络出版日期
作者单位点击查看
备注吴健荣(1982-),男,博士,高级工程师,主要从事核电站在役检查设备研发。
引用该论文: WU Jian-Rong,CHEN Huai-Dong,LIN Ge,LI Ming,HONG Mao-Cheng. RPV Inspection Equipment Support Legs Design and Reliability Study[J]. Nondestructive Testing, 2013, 35(11): 15~18
吴健荣,陈怀东,林戈,李明,洪茂成. 反应堆压力容器检查机支撑腿的设计及可靠性研究[J]. 无损检测, 2013, 35(11): 15~18
被引情况:
【1】朱传雨,林戈,王贤彬,金国栋, "反应堆压力容器视频检查控制系统",无损检测 38, 52-55(2016)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】陈泓.世界先进反应堆型——欧洲压水堆EPR介绍[J].中国电力,2000(2):65-69.
【2】许伟科,李明,陈怀东,等.一种反应堆压力容器检查机(TIME)机械装置介绍[C].江苏:南京,远东无损检测新技术论坛论文集,2009:272-275.
【3】张爱玲,蒋岚,成波.基于ANSYS的结构优化设计方法[J].四川建筑,2009(3):146-150.
【2】许伟科,李明,陈怀东,等.一种反应堆压力容器检查机(TIME)机械装置介绍[C].江苏:南京,远东无损检测新技术论坛论文集,2009:272-275.
【3】张爱玲,蒋岚,成波.基于ANSYS的结构优化设计方法[J].四川建筑,2009(3):146-150.
相关信息