Development of Standard Atlas for Penetrate Testing of the Micro-porosity in Casting
摘 要
论述了制订精铸件显微疏松类缺陷的荧光渗透检验标准图谱研制的工作思路、工艺流程。研制出的图谱经反复修订后进入了生产现场,通过试验验证后认为其满足了某些高温合金显微疏松荧光缺陷检验标准的要求。该标准图谱与国外荧光检验标准图谱对比,效果相当,满足了国内铸件显微疏松荧光标准图谱的实际需要。
Abstract
This paper discussed the development process of standard atlas for penetrate testing of the micro-porosity in casting. It was proved that the revised standard atlas could meet the standard test requirements of some high temperature alloy micro-porosity fluorescence in production site. Compared with foreign standard atlas for penetrate testing, the developed standard atlas has the equivalent effect and it meets completely the domestic needs of standard atlas for penetrate testing of the micro-porosity in casting.
中图分类号 TG115.28
所属栏目 试验研究
基金项目
收稿日期 2013/4/21
修改稿日期
网络出版日期
作者单位点击查看
备注任富华(1954-),男,研究员,学士,主要从事无损检测技术研究和常规无损检测技术指导工作。
引用该论文: REN Fu-Hua,LIU Hai-Qiang,PENG Zhi-Jiang. Development of Standard Atlas for Penetrate Testing of the Micro-porosity in Casting[J]. Nondestructive Testing, 2013, 35(11): 63~66
任富华,刘海强,彭志江. 铸件显微疏松荧光渗透检验标准图谱研制[J]. 无损检测, 2013, 35(11): 63~66
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李家伟,陈积懋.无损检测手册[M].北京:机械工业出版社,2002.1.
【2】国防科技工业无损检测人员资格与认证培训教材编审委员会.渗透检测[M].北京:机械工业出版社,2004.10.
【2】国防科技工业无损检测人员资格与认证培训教材编审委员会.渗透检测[M].北京:机械工业出版社,2004.10.
相关信息