Honeycomb Structure Composite Inspection With Ultrasound Phased-Array Technology
摘 要
随着蜂窝复合材料在航空航天领域的广泛应用,其无损检测的要求也越来越高。常规超声检测技术不仅速度慢而且分析困难。超声相控阵技术采用电子扫查,检测速度大大提升,再配合C扫描视图,可以使缺陷的分析变得简单。文章介绍了采用超声相控阵技术检测碳纤维蒙皮铝蜂窝工件、带涂层以及不带涂层的碳纤维蒙皮纸蜂窝工件的三个检测案例。从检测结果可以得出,超声相控阵技术可以有效检测蜂窝复合材料的内部脱粘缺陷,具有很好的应用价值。
Abstract
As honeycomb, structure composites are more and more widely used in aerospace industry, the nondestructive testing also demands higher requirements. But conventional ultrasound inspection has a slow scanning speed and is hard to analyze the result. By comparison, phased-array inspection uses electronic scanning mode that enhances the scanning speed greatly, and with C-scan, it makes the analysis of the results much easier. Three cases using phased ultrasonic testing technique to detect the different types of honeycomb-structure composite pieces were introduced. Testing results showed that phased array ultrasonic technique could effectively detect the defect of lack-glue, and has a good application prospect in this field.
中图分类号 TG115.28
所属栏目 2013远东无损检测新技术论坛论文精选
基金项目
收稿日期 2013/6/17
修改稿日期
网络出版日期
作者单位点击查看
备注白小宝(1986-),男,技术工程师,长期从事超声波的仿真及工艺开发工作.
引用该论文: BAI Xiao-Bao,SUN Jian-Gang,ZHOU Jian-Ping,ZHOU Li,JIANG Yun-Xi. Honeycomb Structure Composite Inspection With Ultrasound Phased-Array Technology[J]. Nondestructive Testing, 2013, 35(12): 46~48
白小宝,孙建罡,周建平,周莉,江运喜. 超声相控阵技术检测蜂窝复合材料案例[J]. 无损检测, 2013, 35(12): 46~48
被引情况:
【1】龙绒蓉,王海涛,郭瑞鹏,君,郭艳,沈立军, "二维超声相控阵的声场特性",无损检测 37, 1-4(2015)
【2】孙霓,邢耀淇,陈以方, "基于PCIE总线的超声相控阵检测系统",无损检测 36, 1-5(2014)
【3】付汝龙,陈建华,林丹源,郑伟和,林齐梅, "复合材料的相控阵超声C扫描成像检测",无损检测 37, 38-41(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】吴人洁.复合材料[M].天津:天津大学出版社,2000.
【2】张永民.复合材料蜂窝夹层结构射线检测中常见的缺陷分析[C].西安:陕西省第十三届无损检测年会,2012.
【3】徐丽,张幸红,韩杰才. 航空航天复合材料无损检测研究现状[J]. 材料导报,2005,19(8):79-82.
【4】范秋习.蜂窝夹层复合材料[J].北京轻工业学院学报,1998,16(2):77-81.
【5】周正干,高翌飞.金属基复合材料超声无损检测及评价技术的发展[J].航空制造技术,2009(4):101-104.
【2】张永民.复合材料蜂窝夹层结构射线检测中常见的缺陷分析[C].西安:陕西省第十三届无损检测年会,2012.
【3】徐丽,张幸红,韩杰才. 航空航天复合材料无损检测研究现状[J]. 材料导报,2005,19(8):79-82.
【4】范秋习.蜂窝夹层复合材料[J].北京轻工业学院学报,1998,16(2):77-81.
【5】周正干,高翌飞.金属基复合材料超声无损检测及评价技术的发展[J].航空制造技术,2009(4):101-104.
相关信息