ICP-AES Determination of Trace Amounts of Beryllium and Cadmium in Non-Noble Metallic Dental Materials
摘 要
提出了电感耦合等离子体原子发射光谱法测定非贵金属齿科材料镍铬合金、钴铬合金及钛合金中痕量镉和铍.用盐酸-硝酸-氢氟酸混合酸溶解试样,使用基体匹配法消除基体的干扰.镉和铍的质量浓度在1.0 mg·L-1以内均与其发射强度呈线性关系,检出限(3s)在0.000 6~0.014 mg·L-1之间.方法用于非贵金属齿科材料样品的分析,加标回收率在97.0%~106%之间.
Abstract
A method of ICP-AES for the determination of trace amounts of beryllium and cadmium in non-noble metallic dental materials,i.e. nickel-chromium alloys,cobalt-chromium alloys and titanium alloys was proposed. The sample was dissolved in HCl-HNO3-HF. The matrix matching method was used to eliminate the matrix interference. Linear relationship between values of emission intensity and mass concentration of beryllium and cadmium was kept in the range within 1.0 mg·L-1 with detection limit (3s) in the range of 0.000 6-0.014 mg·L-1. The proposed method was applied to the analysis of samples of non-noble metallic dental materials,giving values of recovery in the range of 97.0%-106%.
中图分类号 O657.31
所属栏目 工作简报
基金项目 上海材料研究所技术创新项目(11SG-002)
收稿日期 2014/4/8
修改稿日期
网络出版日期
作者单位点击查看
备注陈忠颖(1981-),女,上海人,工程师,主要从事金属材料分析.
引用该论文: CHEN Zhong-ying,MA Chong-xian. ICP-AES Determination of Trace Amounts of Beryllium and Cadmium in Non-Noble Metallic Dental Materials[J]. Physical Testing and Chemical Analysis part B:Chemical Analysis, 2015, 51(2): 184~187
陈忠颖. 电感耦合等离子体原子发射光谱法测定非贵金属齿科材料中痕量铍和镉[J]. 理化检验-化学分册, 2015, 51(2): 184~187
被引情况:
【1】王斌,况丽,钟康华,方成,温健昌,林伦飞,谭丙文, "乙二胺四乙酸二钠络合消解-电感耦合等离子体原子发射光谱法测定塑料中的铅、镉、铬和汞",理化检验-化学分册 52, 552-554(2016)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】于思荣.金属系牙科材料的应用现状及部分元素的毒副作用[J].金属功能材料,2000,7(1):1-6.
【2】马骞,吴凤呜.3种烤瓷铸造合金的离子析出研究[J].口腔医学,2011,31(1):33-36.
【3】汪大林.口腔医学中金属与合金材料的应用现状和存在的问题[J].生物医学工程学杂志,1993,10(3):364-367.
【4】赵曦,陈新民,王姝.镀金对牙科含钛合金材料金属铍离子析出的影响[J].四川大学学报:医学版,2008,39(4):638-640.
【5】江刚.美国国家毒物学办公室把铍及其化合物列为人类致癌物[J].中国环境科学,2000,20(2):206-208.
【6】刘志宏,简旭辉,朱玲勤,等.铍作业工人职业肿瘤的回顾性流行病学调查[J].宁夏医学院学报,2005,27(3):173-174.
【7】汪大林,江中明.牙科合金材料应用研究现状[J].特种铸造及有色合金,1998(3):42-44.
【8】严丽,刘慧颖.几种常见金属污染环境对人体危害的简介[J].黑龙江冶金,2004,8(4):45-48.
【9】ASTM E 2594-09Standard test method for analysis of nickel alloys by inductively coupled plasma atomic emission spectrometry (performance-based method)[S].
【10】HB 7716.13-2002钛合金化学成分光谱分析方法 第13部分:电感耦合等离子体原子发射光谱法测定铝、铬、铜、钼、锰、钕、锡、钒、锆含量[S].
【11】ASTM E2371-13Standard test method for analysis of titanium and titanium alloys by direct current plasma and inductively coupled plasma atomic emission spectrometry (performance-based test methodology)[S].
【2】马骞,吴凤呜.3种烤瓷铸造合金的离子析出研究[J].口腔医学,2011,31(1):33-36.
【3】汪大林.口腔医学中金属与合金材料的应用现状和存在的问题[J].生物医学工程学杂志,1993,10(3):364-367.
【4】赵曦,陈新民,王姝.镀金对牙科含钛合金材料金属铍离子析出的影响[J].四川大学学报:医学版,2008,39(4):638-640.
【5】江刚.美国国家毒物学办公室把铍及其化合物列为人类致癌物[J].中国环境科学,2000,20(2):206-208.
【6】刘志宏,简旭辉,朱玲勤,等.铍作业工人职业肿瘤的回顾性流行病学调查[J].宁夏医学院学报,2005,27(3):173-174.
【7】汪大林,江中明.牙科合金材料应用研究现状[J].特种铸造及有色合金,1998(3):42-44.
【8】严丽,刘慧颖.几种常见金属污染环境对人体危害的简介[J].黑龙江冶金,2004,8(4):45-48.
【9】ASTM E 2594-09Standard test method for analysis of nickel alloys by inductively coupled plasma atomic emission spectrometry (performance-based method)[S].
【10】HB 7716.13-2002钛合金化学成分光谱分析方法 第13部分:电感耦合等离子体原子发射光谱法测定铝、铬、铜、钼、锰、钕、锡、钒、锆含量[S].
【11】ASTM E2371-13Standard test method for analysis of titanium and titanium alloys by direct current plasma and inductively coupled plasma atomic emission spectrometry (performance-based test methodology)[S].
相关信息