The Industrial Designing Requirement of the Ultrasonic Inspecting Instruments Based on Thermal Design
摘 要
随着超声探伤仪器性能、功能的提升,产品的输入功率也在增大;而超声探伤仪器对防水、防尘性能有特别要求,故对超声探伤仪器的工业设计提出了新的需求,即工业设计必须基于产品的热设计来进行.基于热设计的基本理论,通过实例介绍了某超声成像检测仪在不同模块不同热设计需求条件下的工业设计.
Abstract
With the improvement of the performance and function of the ultrasonic inspecting instruments,their input power is also increasing.However,due to the adverse application environment in ultrasonic inspecting instruments,the waterproof and the dustproof for the products are especially required.Thus new requirement has been put forward for the design of ultrasonic inspecting instruments,in other words,the industrial design is strictly in accordance with the thermal design of the products.In this passage,the authors,according to the basic theory of thermal design,illustrate the example to introduce the requirement of industrial design of a certain ultrasonic imaging detector when it is placed in different modules and with different thermal designs.
中图分类号 TG115.28
所属栏目 仪器研制
基金项目
收稿日期 2014/6/12
修改稿日期
网络出版日期
作者单位点击查看
备注林伟杰(1977-),男,机械工程师,主要从事无损检测等产品的工业设计和机械设计工作.
引用该论文: LIN Wei-jie,CAI Ze-yi,CHEN Tu-sen. The Industrial Designing Requirement of the Ultrasonic Inspecting Instruments Based on Thermal Design[J]. Nondestructive Testing, 2015, 37(2): 56~59
林伟杰,蔡泽毅,陈图森. 超声探伤仪器中基于热设计需求的工业设计[J]. 无损检测, 2015, 37(2): 56~59
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】程能林.工业设计手册[M].北京:化学工业出版社,2007.
【2】许奕瀚,王贤凯,杨金耀,等.医用超声诊断设备的热设计[J].中国医疗器械信息,2013,19(6):10-14.
【3】余建祖,高红霞,谢永奇.电子设备热设计及分析技术[M].北京:北京航空航天大学出版社,2008.
【4】刘子建.新产品开发与造型设计[M].西安:陕西科学技术出版社,2003.
【2】许奕瀚,王贤凯,杨金耀,等.医用超声诊断设备的热设计[J].中国医疗器械信息,2013,19(6):10-14.
【3】余建祖,高红霞,谢永奇.电子设备热设计及分析技术[M].北京:北京航空航天大学出版社,2008.
【4】刘子建.新产品开发与造型设计[M].西安:陕西科学技术出版社,2003.
相关信息